MIL-STD-701M, MILITARY STANDARD, LIST OF STANDARD SEMICONDUCTOR DEVICES (9 JUN 1986)., This standard establishes the requirements for the selection of semiconductor devices used in the design and manufacture of military equipment.

MIL-STD-701N, MILITARY STANDARD, LISTS OF STANDARD SEMICONDUCTOR DEVICES (31 JAN 1990)., This standard establishes the requirements for the selection of semiconductor devices used in the design and manufacture of military equipment.

MIL-STD-701P (NOTICE 1), MILITARY STANDARD, LIST OF STANDARD SEMICONDUCTOR DEVICES (15 JUL 1999) [S/S BY MIL-HDBK-5961]., MIL-STD-701P, dated 31 January 1990, is hereby canceled and replaced by MIL-HDBK-5961.

MIL-STD-701P, MILITARY STANDARD, LISTS OF STANDARD SEMICONDUCTOR DEVICES (20 NOV 1992) [S/S BY MIL-HDBK-5961]., This standard establishes the requirement for the selection of semiconductor devices used in the design and manufacture of military equipment.

MIL-STD-704, MILITARY STANDARD, ELECTRIC POWER, AIRCRAFT, CHARACTERISTICS AND UTILIZATION OF (6 OCT 1959) [SUPERSEDING MIL-E-7894A (ASG)]., This standard establishes the requirements and characteristics of aircraft electric power provided at the input terminals of electric utilization equipment.

MIL-STD-704E, MILITARY STANDARD, AIRCRAFT ELECTRIC POWER CHARACTERISTICS (1 MAY 1991)., The purpose of this standard is to ensure compatibility between the aircraft electric system, external power, and airborne utilization equipment. This standard defines the requirements and describes the characteristics of aircraft electric power provided at the input terminals of electric utilization equipment.

MIL-STD-704F, MILITARY STANDARD, AIRCRAFT ELECTRIC POWER CHARACTERISTICS (12 MAR 2004)., This standard establishes the requirements and characteristics of aircraft electric power provided at the input terminals of electric utilization equipment. MIL-HDBK- 704-1 through-8 defines test methods and procedures for determining airborne utilization equipment compliance with the electric power characteristics requirements defined herein. Electromagnetic interference and voltage spikes are not covered by this standard.

MIL-STD-705C, MILITARY STANDARD, GENERATOR SETS, ENGINE DRIVEN METHODS OF TESTS AND INSTRUCTIONS (24 APR 1989)., This standard covers five series of specific test methods for testing and determining the characteristics of electric generators, generator sets, and associated equipment. This standard establishes methods of test for determining characteristics desired by the Military Departments to insure that electric generators and generator sets comply with Military requirements.

MIL-STD-708, MILITARY STANDARD, FORMULA FOR BINDER SOLUTION (24 MAR 1959) [SUPERSEDING NAVORD OS 8587, 8588, AND 8589]., This standard has been approved by Bureau of Ordnance, and is published to provide a formula for binder solution used in illuminant compositions.

MIL-STD-709C (NOTICE 1), MILITARY STANDARD, AMMUNITION COLOR CODING (7 FEB 1980)., The following pages of MIL-STD-709C have been revised and supersede the pages listed.

MIL-STD-709C (NOTICE 2), MILITARY STANDARD, AMMUNITION COLOR CODING (28 SEPT 1984)., The following pages of MIL-STD-709C have been revised and supersede the pages listed.

MIL-STD-709C, MILITARY STANDARD, AMMUNITION COLOR CODING (6 MAY 1976)., This standard establishes a color coding system for ammunition with the exceptions of ammunition under 1.1.1.

MIL-STD-710D, MILITARY STANDARD, SYNCHROS, 60 AND 400 Hz, SELECTION AND APPLICATION OF (25 MAR 1991)., This standard establishes requirements for the selection and application of synchros for use in military equipments. Included are the following: a. A list of synchros considered by the Department of Defense as standard for use in the design of military equipments. Requirements for the application of synchros in military equipment. Specific requirements for the synchros listed in this standard are included in the latest issue of MIL-S-20708 and its associated specification sheets.

MIL-STD-721, MILITARY STANDARD, DEFINITIONS OF TERMS FOR RELIABILITY AND MAINTAINABILITY (12 JUN 1981)., The purpose of this standard is to define words and terms used most frequently in specifying Reliability and Maintainability to give these terms a common meaning for the Department of Defense contractors.

MIL-STD-721C (NOTICE 1), MILITARY STANDARD DEFINITIONS OF TERMS FOR RELIABILITY AND MAINTAINABILITY (23 OCT 1991)., MIL-STD-721C, dated 12 June 1981, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-721C (NOTICE 2), MILITARY STANDARD, DEFINITIONS OF TERMS FOR RELIABILITY AND MAINTAINABILITY (5 DEC 1995)., MIL-STD-721C, dated 12 June 1981, is hereby canceled without replacement.

MIL-STD-721C, MILITARY STANDARD, DEFINITIONS OF TERMS FOR RELIABILITY AND MAINTAINABILITY (12 JUN 1981)., The purpose of this standard is to define words and terms used most frequently in specifying Reliability and Maintainability (R&M) to give these terms a common meaning for the Department of Defense and defense contractors.

MIL-STD-726H (NOTICE 1), MILITARY STANDARD, PACKAGING REQUIREMENT CODES (20 JAN 1986) [S/S MIL-STD-2073-2]., The following pages of MIL-STD-726H have been revised and supersede the pages listed.

MIL-STD-726H (NOTICE 2), MILITARY STANDARD, PACKAGING REQUIREMENT CODES (8 APR 1988) [S/S MIL-STD-2073-2]., The following pages of MIL-STD-726H have been revised and supersede pages listed.

MIL-STD-726H (NOTICE 3), MILITARY STANDARD, PACKAGING REQUIREMENT CODES (28 APR 1989) [S/S MIL-STD-2073-2]., MIL-STD-726H, dated 31 July 1985, is inactive for new design.

MIL-STD-726H (NOTICE 4), MILITARY STANDARD, PACKAGING REQUIREMENT CODES (23 JUN 1993) [S/S MIL-STD-2073-2]., MIL-STD-726H, dated 31 July 1985, is hereby canceled. Future acquisitions should refer to MIL-STD-2073-2, "Packaging Requirement Codes (Part 2 of 2 Parts)."

MIL-STD-726H, MILITARY STANDARD, PACKAGING REQUIREMENT CODES (31 JUL 1985) [S/S MIL-STD-2073-2]., The purpose of this standard is to establish and define a system for coding essential and optional preservation and packaging data.

MIL-STD-731, MILITARY STANDARD, QUALITY OF WOOD MEMBERS FOR CONTAINERS AND PALLETS (9 DEC 1959)., This standard covers quality requirements for three classes of wood members employed in the construction of boxes, crates, pallets, and blocking and bracing within containers for domestic and overseas shipment.

MIL-STD-731A (NOTICE 1), MILITARY STANDARD, QUALITY OF WOOD MEMBERS FOR CONTAINERS AND PALLETS (17 AUG 1992) [S/S by ASTM-D6199]., The following pages of MIL-STD-731A have been revised and supersede the pages listed.

MIL-STD-731A (NOTICE 2), MILITARY STANDARD, QUALITY OF WOOD MEMBERS FOR CONTAINERS AND PALLETS (5 DEC 1995)[S/S by ASTM-D6199]., MIL-STD-731A, dated 4 October 1990, is hereby canceled without replacement.

MIL-STD-731A (NOTICE 3), MILITARY STANDARD, QUALITY OF WOOD MEMBERS FOR CONTAINERS AND PALLETS (3 MAY 2002) [S/S by ASTM-D6199]., MIL-STD-731A, dated 4 October 1990, is hereby canceled and superseded by ASTM D6199 entirely.

MIL-STD-740-1(SH), MILITARY STANDARD, AIRBORNE SOUND MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT (30 DEC 1986)., This standard prescribes instrumentation and procedures required for the measurement and analysis of, and maximum acceptable sound level criteria for, airborne sound generated by shipboard equipment.

MIL-STD-740-2(SH), MILITARY STANDARD, STRUCTUREBORNE VIBRATORY ACCELERATION MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT (30 DEC 1986)., This standard prescribes instrumentation and procedures for the measurement and analysis of, and maximum acceptable level criteria for structureborne vibratory acceleration generated by shipboard equipment.

MIL-STD-740B(SH), MILITARY STANDARD, AIRBORNE AND STRUCTUREBORNE NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA of SHIPBOARD EQUIPMENT (13 JAN 1965) [SUPERSEDING MIL-E-22843]., This standard covers acceptable instrumentation and procedures for the measurement and acceptance criteria for, airborne and structurborne noise of Naval shipboard equipment.

MIL-STD-746A, MILITARY STANDARD, RADIOGRAPHIC TESTING REQUIREMENTS FOR CAST EXPLOSIVES (31 JAN 1963)., This standard covers the requirements for radiographic inspection used in determining the presence of discontinuities in cast explosives.

MIL-STD-750 (SUMMARY OF CHANGES), MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES., Description of change, Justification for the change.

MIL-STD-750D (NOTICE 1), MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES (18 MAY 1995)., The following pages of MIL-STD-750D have been revised and supersede the following.

MIL-STD-750D (NOTICE 2), MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES (23 FEB 1996)., The following pages of mil-std-750d have been revised and supersede the pages listed.

MIL-STD-750D (NOTICE 2), MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES (23 FEB 1996)., The following pages of mil-std-750d have been revised and supersede the pages listed.

MIL-STD-750D (NOTICE 3), MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES (29 FEB 2000)., To all holders of mil-std-750d: 1. The following pages of mil-std-750d have been revised and supersede the pages listed:

MIL-STD-750D (NOTICE 4), MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES (30 APR 2001)., To all holders of mil-std-750d: 1. The following pages of mil-std-750d have been revised and supersede the pages listed:

MIL-STD-750D (NOTICE 5), MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES (12 NOV 2002)., The following pages of mil-std-750d have been revised and supersede the pages listed:

MIL-STD-750D, MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES (28 FEB 1995)., This standard establishes uniform methods for testing semiconductor devices, including basic environmental tests to determine resistance to deleterious effects of natural elements and conditions surrounding military operations, and physical and electrical tests.

MIL-STD-750E, MILITARY STANDARD, 1000 SERIES, ENVIRONMENTAL TESTS DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST METHODS FOR SEMICONDUCTOR DEVICES.

MIL-STD-750E, MILITARY STANDARD, 2000 SERIES, MECHANICAL CHARACTERISTICS TESTS; DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST METHODS FOR SEMICONDUCTOR DEVICES.

MIL-STD-750E, MILITARY STANDARD, 3000 SERIES, ELECTRICAL CHARACTERISTICS TESTS FOR BIPOLAR TRANSISTORS DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST METHODS FOR SEMICONDUCTOR DEVICES.

MIL-STD-750E, MILITARY STANDARD, 4000 SERIES, ELECTRICAL CHARACTERISTICS TESTS FOR DIODES DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST METHODS FOR SEMICONDUCTOR DEVICES.

MIL-STD-750E, MILITARY STANDARD, 5000 SERIES, HIGH RELIABILITY SPACE APPLICATION TESTS DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST METHODS FOR SEMICONDUCTOR DEVICES.

MIL-STD-750E, MILITARY STANDARD, TEST METHODS FOR SEMICONDUCTOR DEVICES (20 NOV 2006)., This standard establishes uniform methods for testing semiconductor devices, including basic environmental tests to determine resistance to deleterious effects of natural elements and conditions surrounding military operations, and physical and electrical tests. For the purpose of this standard, the term "devices" includes such items as transistors, diodes, voltage regulators, rectifiers, tunnel diodes, and other related parts. This standard is intended to apply only to semiconductor devices.

MIL-STD-751A(SH) (NOTICE 1), MILITARY STANDARD, RADAR OUTPUTS, NAVAL SHIP AND SHORE (18 JAN 1989)., The following pages of MIL-STD-751A (SH) have been revised and supersede the pages listed.

MIL-STD-751A(SH), MILITARY STANDARD, RADAR OUTPUTS, NAVAL SHIP AND SHORE (3 SEPT 1987)., This standard establishes and updates the basic requirements for the multiplexed and analog outputs of radar systems used in Naval surface ships, submarines, and shore installations.

MIL-STD-753C (NOTICE 1), MILITARY STANDARD, CORROSION-RESISTANT STEEL PARTS: SAMPLING, INSPECTION AND TESTING FOR SURFACE PASSIVATION (18 DEC 1998) [S/S BY SAE-AMS-STD-753]., MIL-STD-753C, dated 29 June 1990, is hereby canceled. Future acquisition for this material should refer to SAE-AMS-STD-753, “Corrosion Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation”.

MIL-STD-753C, MILITARY STANDARD, CORROSION-RESISTANT STEEL PARTS: SAMPLING, INSPECTION AND TESTING FOR SURFACE PASSIVATION (29 JUN 1990)[S/S BY SAE-AMS-STD-753]., This standard describes general and detailed methods of sampling and testing for surface passivity of corrosion-resistant steel parts. These tests may also be useful to determine if there is a need for passivation.

MIL-STD-756B (NOTICE 1), MILITARY STANDARD, RELIABILITY MODELING AND PREDICTION (31 AUG 1982)., The following pages of MIL-STD-7568 have been revised and supersede the pages listed.

MIL-STD-756B (NOTICE 2), MILITARY STANDARD, RELIABILITY MODELING AND PREDICTION (4 MAY 1998)., MIL-STD-756B, dated 31 August 1982, is hereby canceled without replacement.

MIL-STD-756B, MILITARY STANDARD, RELIABILITY MODELING AND PREDICTION (18 NOV 1981)., This standard establishes uniform procedures and ground rules for the preparation of Mission Reliability and Basic Reliability models and predictions for electronic, electrical, electro-mechanical, mechanical, and ordinance systems and equipments, hereinafter referred to as items.

MIL-STD-758C(SH), MILITARY STANDARD, PACKAGING PROCEDURES FOR SUBMARINE SUPPORT ITEMS (13 APR 1990)., This standard establishes the procedures for the packaging of submarine support items at the time of acquisition or completion of repair which will assure maximum protection, minimum cube preservation, and transparent preservation.

MIL-STD-765A (NOTICE 1), MILITARY STANDARD, COMPASS SWINGING, AIRCRAFT, GENERAL REQUIREMENTS FOR (26 JUL 1978)., The following pages of MIL-STD-765A have been revised and supersede the pages listed.

MIL-STD-765A (NOTICE 2), MILITARY STANDARD, COMPASS SWINGING, AIRCRAFT, GENERAL REQUIREMENTS FOR (26 FEB 1988)., MIL-STD-765A dated 4 January 1967 and Notice 1 dated 26 July 1978 have been reviewed and determined to be valid for use in acquisition.

MIL-STD-765A (NOTICE 3), MILITARY STANDARD COMPASS SWINGING, AIRCRAFT, GENERAL REQUIREMENTS FOR (28 SEPT 1995)., MIL-STD-765A dated 4 January 1967 is hereby canceled without replacement.

MIL-STD-765A (NOTICE 4), MILITARY STANDARD, COMPASS SWINGING, AIRCRAFT, GENERAL REQUIREMENTS FOR (27 DEC 1996)., MIL-STD-765A dated 4 January 1967 is hereby reinstated as inactive for new design and limited coordinated.

MIL-STD-765A, MILITARY STANDARD, COMPASS SWINGING, AIRCRAFT, GENERAL REQUIREMENTS FOR (4 JAN 1967)., This standard provides general requirements governing the swinging of compasses in aircraft compensation and calibration. It pertains specifically to accurate swinging of compasses in all fighter, bomber, cargo, or helicopter type aircraft utilizing a standard magnetic compass.

MIL-STD-769J(SH), MILITARY STANDARD, DESIGN CRITERIA, THERMAL INSULATION REQUIREMENTS FOR MACHINERY AND PIPING (9 OCT 1990)., The purpose of this standard is to prescribe the requirements for thermal insulation of piping, machinery, uptakes, and mechanical equipment for ships of the US Navy.

MIL-STD-771C (NOTICE 1), MILITARY STANDARD, DAMAGE CONTROL BOOKS FOR AUXILIARY AND MISCELLANEOUS SHIPS, PREPARATION OF (24 JUL 1991)., MIL-STD-771C (SHIPS) dated 1 June 1972 is inactive for new design and shall be no longer used except in the procurement of replenishment spares as necessary to maintain equipment in the field until obsoletion or wear out.

MIL-STD-771C (NOTICE 2), MILITARY STANDARD DAMAGE CONTROL BOOKS FOR AUXILIARY AND MISCELLANEOUS SHIPS, PREPARATION OF (14 AUG 1995)., MIL-STD-771C (SHIPS) dated 1 June 1972 and Change Notice 1 dated 24 July 1991 are hereby canceled without replacement.

MIL-STD-771C, MILITARY STANDARD, DAMAGE CONTROL BOOKS FOR AUXILIARY AND MISCELLANEOUS SHIPS, PREPARATION OF (1 JUN 1972)., This standard covers the requirements for preparation and distribution of damage control books (diagrams, text, and tables) for auxiliary and miscellaneous ships over 220 feet in length, in addition to certain fleet operated surface ships under 220 feet in length that require halftone reproduction.

MIL-STD-772C(SH) (NOTICE 1), MILITARY STANDARD, DAMAGE CONTROL BOOKS FOR WARSHIPS AND MISCELLANEOUS LARGE SHIPS, PREPARATION OF (19 JUN 1974). The following pages of MIL-STD-772C (SHIPS) have been revised and supersede the pages listed.

MIL-STD-772C(SH) (NOTICE 2), MILITARY STANDARD, DAMAGE CONTROL BOOKS FOR WARSHIPS AND MISCELLANEOUS LARGE SHIPS, PREPARATION OF (20 JUL 1995)., MIL-STD-772C, dated 23 July 1971, is hereby canceled.

MIL-STD-772C(SH), MILITARY STANDARD, DAMAGE CONTROL BOOKS FOR WARSHIPS AND MISCELLANEOUS LARGE SHIPS, PREPARATION OF (23 JUL 1971)., This standard covers the requirements for preparation and distribution of damage control books (diagrams, text and tables) for all warships and miscellaneous large ships, where the diagrams are lithographic in color.

MIL-STD-777E(SH) (NOTICE 1), MILITARY STANDARD, SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS (17 JAN 1990)., The following pages of MIL-STD-777E (SH)have been revised and supersede the pages listed.

MIL-STD-777E(SH) (NOTICE 2), MILITARY STANDARD, SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS (13 NOV 1991)., The following pages of MIL-STD-777E (SH)have been revised and supersede the pages listed.

MIL-STD-777E(SH) (NOTICE 3), MILITARY STANDARD, SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS (11 JUN 1995)., The following pages of MIL-STD-777E (SH) have been revised and supersede the pages listed.

MIL-STD-777E(SH) (NOTICE 4), MILITARY STANDARD, SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS (31 JAN 2002)., The following pages of MIL-STD-777E (SH) have been revised and supersede the pages listed.

MIL-STD-777E(SH) (NOTICE 5), MILITARY STANDARD, SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS (7 FEB 2002)., The following pages of MIL-STD-777E (SH) have been revised and supersede the pages listed.

MIL-STD-777E(SH) (NOTICE 6), MILITARY STANDARD, SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS (19 FEB 2002)., The following pages of MIL-STD-777E (SH) have been revised and supersede the pages listed.

MIL-STD-777E(SH) (NOTICE 7), MILITARY STANDARD, SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS (8 JUL 2002)., The following pages of MIL-STD-777E (SH) have been revised and supersede the pages listed.

MIL-STD-777E(SH), MILITARY STANDARD, SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS (7 FEB 1986)., This standard covers requirements for basic piping system components on Navy surface ships.

MIL-STD-780G(AS), MILITARY STANDARD, WORK UNIT CODES FOR AERONAUTICAL EQUIPMENT; UNIFORM NUMBERING SYSTEM (18 AUG 1992)., The purpose of this standard is to identify Work Unit Code System Codes, define the methods used in assignment of Work Unit Codes and describe the use of Work Unit Codes in maintenance data collection systems.

MIL-STD-781C, MILITARY STANDARD, RELIABILITY DESIGN QUALIFICATION AND PRODUCTION ACCEPTANCE TESTS: EXPONENTIAL DISTRIBUTION (21 OCT 1977)., This standard covers the requirements for reliability qualification tests (preproduction) and reliability acceptance tests (production) for equipment that experiences a distribution of times-to-failure that is exponential.

MIL-STD-781D (NOTICE 1), MILITARY STANDARD, RELIABILITY TESTING FOR ENGINEERING DEVELOPMENT, QUALIFICATION, AND PRODUCTION (8 OCT 1996) [S/S BY MIL-HDBK-781A]., MIL-STD-781D, dated 17 October 1986, is hereby canceled. Information from this standard is now contained in MIL-HDBK-781A, “Handbook for Reliability Test Methods, Plans, and Environments for Engineering, Development Qualification, and Production.”

MIL-STD-781D, MILITARY STANDARD, RELIABILITY TESTING FOR ENGINEERING DEVELOPMENT, QUALIFICATION, AND PRODUCTION (17 OCT 1986) [S/S BY MIL-HDBK-781A]., This standard specifies the general requirements and specific tasks for reliability testing during the development, qualification, and production of systems and equipment.

MIL-STD-782D (NOTICE 1), MILITARY STANDARD, RECONNAISSANCE/MAPPING DATA MARKING (7 JUL 1986)., MIL-STD-782D, dated 14 April 1982, is hereby validated and determined adequate for use.

MIL-STD-782D (NOTICE 2), MILITARY STANDARD, RECONNAISSANCE/MAPPING DATA MARKING (5 DEC 1995)., MIL-STD-782D, dated 14 April 1982, is hereby canceled without replacement.

MIL-STD-782D, MILITARY STANDARD, RECONNAISSANCE/MAPPING DATA MARKING (14 APR 1982)., This standard establishes the dimensions, coding methods, quality of dot image, and number of character positions for the code matrix block utilized in the DoD Reconnaissance/Mapping Data Marking System

MIL-STD-783D (NOTICE 1), MILITARY STANDARD, LEGENDS FOR USE IN AIRCREW STATIONS AND ON AIRBORNE EQUIPMENT (20 MAR 1999) [S/S BY JSSG-2010]., MIL-STD-783D, dated 18 December 1984, is hereby canceled. Future acquisitions should refer to portions of JSSG-2010 pertaining to legends and marking.

MIL-STD-783D, MILITARY STANDARD, LEGENDS FOR USE IN AIRCREW STATIONS AND ON AIRBORNE EQUIPMENT (18 DEC 1984) [S/S BY JSSG-2010]., This standard establishes the requirements for legends to be used for marking controls and displays in aircrew stations and on airborne equipment.

MIL-STD-785B (NOTICE 1), MILITARY STANDARD, RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION (3 JUL 1986)., The following pages of MIL-STD-785 have been revised and supersede the pages listed.

MIL-STD-785B (NOTICE 2), MILITARY STANDARD, RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION (5 AUG 1985)., The following pages of MIL-STD-785 have been revised and supersede the pages listed.

MIL-STD-785B (NOTICE 3), MILITARY STANDARD, RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION (30 JUL 1998)., MIL-STD-785B, dated 15 September 1980, is hereby canceled. Users may consult various national and international documents for information regarding reliability planning.

MIL-STD-785B, MILITARY STANDARD, RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION (15 SEPT 1980)., This standard provides general requirements and specifics for reliability programs during the development, production, and initial deployment of systems and equipment.

MIL-STD-787, MILITARY STANDARD, JOINT OPTICAL RANGE INSTRUMENTATION TYPE DESIGNATION SYSTEM (4 DEC 1964)., The Joint Optical Range Instrumentation Type Designation System and procedures are established for use in the assignment of an ORI type nomenclature to all optical range instrumentation material as defined herein.

MIL-STD-789C, MILITARY STANDARD, CONTRACTOR TECHNICAL INFORMATION CODING OF REPLENISHMENT PARTS (14 OCT 1983)., This standard provides a procedure for obtaining contractor technical equipment regarding selected parts for contractor-furnished equipment and identification data needed to enable the Government to acquire such parts.

MIL-STD-790D (NOTICE 1), MILITARY STANDARD, RELIABILITY ASSURANCE PROGRAM FOR ELECTRONIC PARTS SPECIFICATIONS (31 MAY 1988)., The following pages of MIL-STD-790D have been revised and supersede the pages listed.

MIL-STD-790E (NOTICE 1), MILITARY STANDARD, PRODUCT ASSURANCE PROGRAM FOR ELECTRONIC AND FIBER OPTIC PARTS SPECIFICATIONS (27 JUL 1990)., The following pages of MIL-STD-790E have been revised and supersede the pages listed.

MIL-STD-790E, MILITARY STANDARD, PRODUCT ASSURANCE PROGRAM FOR ELECTRONIC AND FIBER OPTIC PARTS SPECIFICATIONS (15 DEC 1989)., This standard is for direct reference in electronic and fiber optic parts product assurance specifications and establishes the criteria for electronic and fiber optic parts product assurance program which are to be met by manufacturer's qualifying electronic parts to the specifications.

MIL-STD-790E, MILITARY STANDARD, PRODUCT ASSURANCE PROGRAM FOR ELECTRONIC AND FIBER OPTIC PARTS SPECIFICATIONS (30 MAY 1986)., This standard is for direct reference in electronic parts established reliability (ER) specifications and establishes the criteria for electronic parts reliability assurance program which are to be met by manufacturers qualifying electronic parts to the specifications.

MIL-STD-790F (NOTICE 1), MILITARY STANDARD, ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATION 17 AUG 2001)., The following pages of MIL-STD-790F have been revised and supersede the pages listed.

MIL-STD-790F (NOTICE 2), MILITARY STANDARD, ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATION (20 SEPT 2002)., The following pages of MIL-STD-790F have been revised and supersede the pages listed.

MIL-STD-790F, MILITARY STANDARD, ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATION (1 AUG 1995)., This standard is for direct reference in established reliability and high reliability electrical, electronic and fiber optic parts specifications and establishes the criteria for a manufacturer's qualified product system.

MIL-STD-792E(SH) (NOTICE 1), MILITARY STANDARD, IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS (23 OCT 1992). The following pages of MIL-STD-792E(SH) have been revised and supersede the pages listed.

MIL-STD-792E(SH) (NOTICE 2), MILITARY STANDARD, IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS (20 JAN 1993)., The following pages of MIL-STD-792E(SH), have been revised and supersede the pages listed.

MIL-STD-792E(SH), MILITARY STANDARD, IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS (12 AUG 1968)., The purpose of this standard is to provide general requirements for the marking of raw materials, products, and components.

MIL-STD-794E (NOTICE 1), MILITARY STANDARD, PARTS AND EQUIPMENT, PROCEDURES FOR PACKAGING OF (28 APR 1989) [S/S BY MIL-STD-2073-1]., MIL-STD-794E, dated 16 July 1982, is Inactive for new design. New deslgns should use MIL-STD-2073-1, “DOD Materiel, Procedures for Development and Application of Packaging Requirements.n CAUTION: The supersession Information Is valid as of the date of this notice and may be superseded by subsequent revisions of the superseding document.

MIL-STD-794E (NOTICE 2), MILITARY STANDARD, PARTS AND EQUIPMENT, PROCEDURES FOR PACKAGING OF (23 JUN 1993)[S/S BY MIL-STD-2073-1]., MIL-STD-794E, dated 16 July 1982, is hereby canceled. Future acquisitions should refer to MIL-STD-2073-1, “DOD Materiel, Procedures for Development and Application of Packaging Requirements (Part 1 of 2 Parts).”

MIL-STD-794E, MILITARY STANDARD, PARTS AND EQUIPMENT, PROCEDURES FOR PACKAGING OF (16 JUL 1982) [S/S BY MIL-STD-2073-1]., This standard provides procedures for packaging parts and equipment based on their material composition, surface finish, size, weight, fragility, configuration and the intended level of protection.

MIL-STD-796A(SH), MILITARY STANDARD, CHEMICAL CLEANING OF MAIN AND AUXILIARY BOILERS (HYDROCHLORIC ACID METHOD (16 MAR 1988). NOTE: MIL-STD-796 has been redesignated as a Standard Practice. The cover page has been changed for Administrative reasons. There are no other changes to this Document. This standard covers the requirements governing the procedure for chemical cleaning of main boilers of ferrous allow construction and auxiliary boilers of ferrous allow or silicon-bronze allow (Herculoy) construction. NAVSEA approval shall be obtained prior to cleaning any boiler.

MIL-STD-798(SH) (NOTICE 1), MILITARY STANDARD, NONDESTRUCTIVE TESTING, WELDING, QUALITY CONTROL, MATERIAL CONTROL, AND IDENTIFICATION AND HI-SHOCK TEST REQUIREMENTS FOR PIPING SYSTEM COMPONENTS FOR NAVAL SHIPBOARD USE (27 NOV 1968).,

MIL-STD-798(SH) (NOTICE 2), MILITARY STANDARD, NONDESTRUCTIVE TESTING, WELDING, QUALITY CONTROL, MATERIAL CONTROL, AND IDENTIFICATION AND HI-SHOCK TEST REQUIREMENTS FOR PIPING SYSTEM COMPONENTS FOR NAVAL SHIPBOARD USE (29 FEB 1988)., MIL-STD-798 (SHIPS), dated 27 November 1968 has been reviewed and determined to be valid for use in acquisition.

MIL-STD-798(SH), MILITARY STANDARD, NONDESTRUCTIVE TESTING, WELDING, QUALITY CONTROL, MATERIAL CONTROL AND IDENTIFICATION AND HI-SHOCK TEST REQUIREMENTS FOR PIPING SYSTEM COMPONENTS FOR NAVAL SHIPBOARD USE (16 DEC 1965)., This standard covers the requirements for nondestructive testing, welding, quality control and identifiability and HI shock for piping system components. It does not apply to primary components of nuclear ships.