MIL-STD-11991 (NOTICE 1), MILITARY STANDARD, ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL STANDARD FOR THE DESIGN OF (30 SEP 1992) [S/S BY MIL-HDBK-11991].

MIL-STD-11991, MILITARY STANDARD, ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL STANDARD FOR THE DESIGN OF (26 JUL 1983) [S/S BY MIL-HDBK-11991]., The purpose of this standard is to standardize requirements for the design of electronic, electrical, and electromechanical equipment common to guided missile and associated weapons systems.

MIL-STD-13231, MILITARY STANDARD, MARKING OF ELECTRONIC ITEMS (2 NOV 1999)., This standard covers the general requirements for marking of electronic items, except marking for shipment and as otherwise specified by an applicable Government document covering the item on which the marking appears. These requirements cover both the information to be shown by the marking and the materials and processes used therefor. This standard should be implemented by incorporating suitable requirements directly in acquisition documents.

MIL-STD-27733, MILITARY STANDARD, MODIFICATION AND MARKING REQUIREMENTS FOR TEST EQUIPMENT IN AEROSPACE VEHICLES AND RELATED SUPPORT EQUIPMENT (18 MAY 1998)., This standard identifies marking, safety, and configuration control practices for temporary non-standard modifications on Department of Defense owned aerospace vehicles, and related support equipment in support of research, development, test and evaluation.

MIL-STD-38784 (NOTICE 1), MILITARY STANDARD, MANUALS, TECHNICAL: GENERAL STYLE AND FORMAT REQUIREMENTS (15 NOV 2000)., THE FOLLOWING PAGES OF MIL-STD-38784 HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-38784 (NOTICE 2), MILITARY STANDARD, MANUALS, TECHNICAL: GENERAL STYLE AND FORMAT REQUIREMENTS (1 DEC 2000)., MIL-STD-38784, dated 2 July 1995, and Notice 1, dated 15 November 2000, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-38784, MILITARY STANDARD, MANUALS, TECHNICAL: GENERAL STYLE AND FORMAT REQUIREMENTS (2 JUL 1995)., This standard covers the general style and format requirements for the preparation of standard Technical Manuals (TM) (see 3.2.36 and 3.2.38) and changes to standard TMs. This includes all technical documents which are assigned a TM identification number and are to be controlled by a TM management information system or are subject to requisition from an inventory control point. In addition to ‘paper” deliverables, this standard provides for electronic delivery of data through use of the Document &pe Definitions (DTD) contained in Appendixes B through E. This general style and format standard supplements the various detail specifications for specific types of TMs and related publications and does not alone deliver any technical data. Examples at the rear of this standard are typical and may be adapted to fit the specific equipment or situation being covered.

MIL-STD-40000, MILITARY STANDARD, PARTS CONTROL PROGRAM FOR NON-DEVELOPMENTAL ITEMS (NDIS) (30 APR 1991) [S/S BY MIL-HDBK-402]., The purpose of this standard is to specify the requirements for conducting an effective parts control program in the acquisition of an NDI system from time of contract award and continuing through the operational (fielding) phase of the system.

MIL-STD-40001A, MILITARY STANDARD, PREPARATION OF FINAL INSPECTION RECORD (FIR) (23 MAY 1991)., This military standard establishes the content and format requirements for the FIR and provides the instructions for its preparation and maintenance (revision).

MIL-STD-40002, MILITARY STANDARD, HEAT TREATMENT CODING SYSTEM, GENERAL (19 NOV 1991)., This standard covers a variety of heat treatment procedures applicable to specific ferrous and nonferrous alloys.

MIL-STD-40006, MILITARY STANDARD, CHROMIUM PLATE; VISUAL INSPECTION OF (METRIC) (4 OCT 1991)., The purpose of this standard is to supplement the quality assurance provisions of AMS 2406 for visual inspection of parts finished by chromium electrodeposition.

MIL-STD-40007, MILITARY STANDARD, RIVETS, SOLID, INSTALLATION OF (20 SEP 1991)., This standard covers processes for the installation and acceptance of solid rivets.

MIL-STD-40008, MILITARY STANDARD, PNEUMATIC PRESSURE TESTING PARTS WITH PERMANENT JOINTS: WELDS, BRAZES, AND RIVETS (10 SEP 1991)., This standard covers various processes for permanently joining metal parts and leakage test procedures for name.

MIL-STD-40009, MILITARY STANDARD, CLEANING AND PASSIVATION, PROCESS FOR (AM350 AND AM355 STAINLESS STEELS) (8 NOV 1991)., This standard covers the process of cleaning and passivation performed on parts fabricated from precipitation hardenable stainless steels AM350 and AM355.

MIL-STD-40051, MILITARY STANDARD, TECHNICAL MANUAL PREPARATION (31 JUL 1996)., This MIL-STD-40051 series establishes the technical content requirements and mandatory style and format requirements for the preparation of paper and digital page-oriented technical manuals (TMs) and revisions required to support the various types of equipment and weapon systems within the Department of the Army. The requirements contained in this standard cover operation and maintenance at all levels through depot. This 8-part book form consists of the following parts. MIL-STD-40051 - Technical Manual Preparation MIL-STD-40051-1 - General Preparation and Assembly Information MIL-STD-40051-2 - Introductory Information With Theory of Operation MIL-STD-40051-3 - Operator Instructions MIL-STD-40051-4 - Troubleshooting Procedures MIL-STD-40051-5 - Maintenance Instructions MIL-STD-40051-6 - Repair Parts and Special Tools List (RPSTL) MIL-STD-40051-7 - Supporting Information

MIL-STD-40051-1 (W/CHANGE 1), MILITARY STANDARD, PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR INTERACTIVE ELECTRONIC TECHNICAL MANUALS (IETMs) (12 MAY 2006). This standard establishes the technical content requirements and mandatory style, format and functionality requirements for the preparation of Interactive Electronic Technical Manuals (IETMs) and subsequent revisions required to support the various types of equipment and weapon systems within the Department of the Army and the Department of the Marine Corps. The requirements contained in this standard cover operation and maintenance at all levels through overhaul (depot), including Depot Maintenance Work Requirements (DMWRs) and National Maintenance Work Requirements (NMWRs). This 2-part book form consists of the following parts. MIL-STD-40051-1 — Preparation of Digital Technical Information for Interactive Electronic Technical Manuals (IETM) MIL-STD-40051-2 — Preparation of Digital Technical Information for Page- Based Technical Manuals

MIL-STD-40051-1, MILITARY STANDARD, TECHNICAL MANUALS, GENERAL PREPARATION AND ASSEMBLY INFORMATION. This standard establishes the requirements for the preparation of front matter, rear matter and mandatory style and format requirements for all technical manuals (TMs) covering operation and maintenance, at all levels through depot maintenance. The requirements are applicable for both paper and digital page-oriented TMs. In addition, this standard provides instructions for assembling individual information work packages into complete TMs. Electronic delivery of TMs is accomplished through the use of the Assembly Document Type Definition (DTD). The DTD is available in a digital format. Refer to MILSTD- 40051 for information on obtaining this DTD. The style and format requirements provided in this standard shall be used for text and graphics development for all TMs.

MIL-STD-40051-2 (W/CHANGE 1), MILITARY STANDARD, PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR PAGE-BASED TECHNICAL MANUALS (12 MAY 2006)., This standard establishes the technical content requirements and mandatory style and format requirements for the preparation of technical manuals (TMs) and subsequent revisions required to support the various types of equipment and weapon systems within the Department of the Army and Department of the Marine Corps. The requirements contained in this standard cover operation and maintenance at all levels through overhaul (depot), including Depot Maintenance Work Requirements (DMWRs) and National Maintenance Work Requirements (NMWRs). This 2-part book form consists of the following parts. MIL-STD-40051-1 — Preparation of Digital Technical Information for Interactive Electronic Technical Manuals (IETM) MIL-STD-40051-2 — Preparation of Digital Technical Information for Page- Based Technical Manuals

MIL-STD-40051-2, MILITARY STANDARD, TECHNICAL MANUALS, INTRODUCTORY INFORMATION WITH THEORY OF OPERATION. This standard establishes the technical content requirements for the preparation of introductory information with theory of operation for weapon systems and equipment Technical Manuals (TMs) and Depot Maintenance Work Requirements (DMWRs). These requirements are applicable for both paper and digital page-oriented TMs. Electronic delivery of TMs is accomplished through the use of the Introductory Information With Theory of Operation modular Document Type Definition (DTD). The DTD is available in a digital format. Refer to MIL-STD-40051 for information on obtaining this DTD. Introductory information with theory of operation requirements include applicable forms and records, descriptive information about the equipment or weapon system and an explanation of how the equipment or weapon system accomplishes its mission.

MIL-STD-40051-3, MILITARY STANDARD, TECHNICAL MANUALS, OPERATOR INSTRUCTIONS., This standard establishes the technical content requirements for the preparation of operator instructions for weapon systems and equipment Technical Manuals (TMs). These requirements are applicable for both paper and digital page-oriented TMs. Electronic delivery of the TMs is accomplished through the use of the Operator Instructions modular Document Type Definition (DTD). The DTD is available in a digital format. Refer to MIL-STD-40051 for information on obtaining this DTD. Operator instructions provide the operator/crew with data for operating the weapon system/equipment including location and use of controls and indicators, how to prepare the weapon system/equipment for use, and how to operate the weapon system/equipment under ordinary, unusual, and emergency conditions.

MIL-STD-40051-4, MILITARY STANDARD, TECHNICAL MANUALS, TROUBLESHOOTING PROCEDURES., This standard establishes the technical content requirements for the preparation of troubleshooting procedures for weapon systems and equipment Technical Manuals (TMs) and Depot Maintenance Work Requirements (DMWRs). These requirements are applicable for both paper and digital page-oriented TMs. Electronic delivery of the TMs is accomplished through the use of the Troubleshooting Procedures modular Document Type Definition (DTD). The DTD is available in a digital format. Refer to MIL-STD-40051 for information on obtaining this DTD. All troubleshooting requirements necessary to develop Operator (-10), Unit (-20), Aviation Unit Maintenance (AVUM), Direct Support (DS) (-30), Aviation Intermediate Maintenance (AVIM), General Support (GS) (-40), and/or depot level (overhaul) TMs are included.

MIL-STD-40051-5, MILITARY STANDARD, TECHNICAL MANUALS, MAINTENANCE INSTRUCTIONS. This standard establishes the technical content requirements for the preparation of maintenance instructions for weapon systems and equipment Technical Manuals (TMs) and Depot Maintenance Work Requirements (DMWRs). These requirements are applicable for both paper and digital page-oriented TMs. Electronic delivery of maintenance instructions for TMs is accomplished through the use of the Maintenance Instruction modular Document Type Definition (DTD). The DTD is available in digital format. Refer to MIL-STD-40051 for information on obtaining this DTD. All maintenance requirements necessary to develop Operator (-10), Unit (-20), Aviation Unit Maintenance (AVUM), Direct Support (DS) (-30), Aviation Intermediate Maintenance (AVIM), General Support (GS) (-40), and/or depot level (overhaul) TMs are included.

MIL-STD-40051-6, MILITARY STANDARD, TECHNICAL MANUALS, REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)., This standard establishes the technical content requirements for the preparation of Repair Parts and Special Tools Lists (RPSTLs) for weapon systems and equipment Technical Manuals (TMs) and Depot Maintenance Work Requirements (DMWRs). These requirements are applicable for both paper and digital page-oriented TMs. Electronic delivery of RPSTL TMs is accomplished through the use of the Repair Parts and Special Tools List modular Document Type Definition (DTD). The DTD is available in a digital format. Refer to MIL-STD-40051 for information on obtaining this DTD. RPSTL requirements include 1) introductory information, 2) tabular listings of all authorized spares and repair parts, special tools, special test, measurement, and diagnostic equipment (TMDE), and other support equipment required for performance of maintenance and 3) illustrations to identify and locate the spare and repair parts.

MIL-STD-40051-7, MILITARY STANDARD, TECHNICAL MANUALS, SUPPORTING INFORMATION., This standard establishes the technical content requirements for the preparation of supporting information (previously known as appendixes) for weapon systems and equipment Technical Manuals (TMs) and Depot Maintenance Work Requirements (DMWRs). These requirements are applicable for both paper and digital page-oriented TMs. Electronic delivery of supporting information included in TMs is accomplished through the use of the Supporting Information modular Document Type Definition (DTD). The DTD is available in a digital format. Refer to MIL-STD-40051 for information on obtaining this DTD. Supporting information requirements are included for the preparation of technical data that supplements the maintenance information contained in the body of the TM. This supplemental information includes reference data, general maintenance and parts information and associated illustrations.

MIL-STD-40051A (NOTICE 1), MILITARY STANDARD, PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (15 FEB 2001)., TO ALL HOLDERS OF MIL-STD-40051A: THE FOLLOWING PAGES OF MIL-STD-40051A HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-40051A (NOTICE 2), MILITARY STANDARD, PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (30 OCT 2001)., TO ALL HOLDERS OF MIL-STD-40051A: THE FOLLOWING PAGES OF MIL-STD-40051A HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-40051A, MILITARY STANDARD, PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (2 MAR 1999)., This MIL-STD-40051A series establishes the technical content requirements and mandatory style and format requirements for the preparation of page-based and frame-based technical manuals (TMs) and subsequent revisions required to support the various types of equipment and weapon systems within the Department of the Army. The requirements contained in this standard cover operation and maintenance at all levels through overhaul (depot), including Depot Maintenance Work Requirements (DMWRs). This 7-part book form consists of the following parts. MIL-STD-40051A - Preparation of Digital Technical Information for Multi-Output Presentation of Technical Manuals MIL-STD-40051-1A - Description and Theory of Operation MIL-STD-40051-2A - Operator Instructions MIL-STD-40051-3A - Troubleshooting Procedures MIL-STD-40051-4A - Maintenance Instructions MIL-STD-40051-5A - Parts Information (PI) and Repair Parts and Special Tools List (RPSTL) MIL-STD-40051-6A - Supporting Information

MIL-STD-40051B (W/CHANGE 3), MILITARY STANDARD, PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (12 MAY 2006). This MIL-STD-40051 series establishes the technical content requirements and mandatory style and format requirements for the preparation of page-based and frame-based technical manuals (TMs) and subsequent revisions required to support the various types of equipment and weapon systems within the Department of the Army. The requirements contained in this standard cover operation and maintenance at all levels through overhaul (depot), including Depot Maintenance Work Requirements (DMWRs) and National Maintenance Work Requirements (NMWRs). This 7-part book form consists of the following parts. MIL-STD-40051 — Preparation of Digital Technical Information for Multi-Output Presentation of Technical Manuals MIL-STD-40051-1 — Description and theory of Operation MIL-STD-40051-2 — Operator Instructions MIL-STD-40051-3 — Troubleshooting Procedures MIL-STD-40051-4 — Maintenance Instructions MIL-STD-40051-5 — Parts Information (PI) and Repair Parts and Special Tools List (RPSTL) MIL-STD-40051-6 — Supporting Information

MIL-STD-40076, MILITARY STANDARD, PRESERVATION AND PACKING OF ROCKET AND MISSILE SYSTEMS EQUIPMENT FOR SHIPMENT (17 DEC 1997)., This standard details the general requirements for preservation, packing, and loading for shipment of rocket and missile systems ground support equipment and hazardous items for worldwide movement and storage.

MIL-STD-45662A, MILITARY STANDARD, CALIBRATION SYSTEM REQUIREMENTS (1 AUG 1998). This military standard provides requirements for the establishment and maintenance of a calibration system to control the accuracy of measuring and test equipment and measurement standards used to assure that supplies and services delivered to the Government comply with prescribed technical requirements.

MIL-STD-46855, MILITARY STANDARD, HUMAN ENGINEERING REQUIREMENTS FOR MILITARY SYSTEMS, EQUIPMENT, AND FACILITIES (26 MAY 1994) [S/S BY MIL-HDBK-46855]., This standard establishes and defines the requirements for applying human engineering to the development and acquisition of military systems, equipment, and facilities.

MIL-STD-47187, MILITARY SPECIFICATION, NUTS, BLIND, PRESS, AND BLIND RIVET, INSTALLATION OF (10 AUG 1993)., This standard covers the requirements for the installation of blind nuts, press nuts, and blind rivet nuts.

MIL-STD-600001, DEPARTMENT OF DEFENSE STANDARD PRACTICE, MAPPING, CHARTING AND GEODSEY ACCURACY (26 FEB 1990)., This standard defines MC&G product accuracy and provides a common basis for the appropriate application of these definitions.

MIL-STD-600011, DEPARTMENT OF DEFENSE STANDARD PRACTICE, DMA SINGLE COLOR OVERPRINT LIMITED REVISION UPDATES (SCO) (18 MAR 1992)., This standard defines the requirements for the compilation, color separation, and reproduction of the Defense Mapping Agency's (DMA) Single Color Overprint Limited Revision Update (SCO) program.

MIL-STD-91621, MILITARY STANDARD, PRINCIPLES OF INSPECT, REPAIR ONLY AS NECESSARY (IROAN) PROCEDURES AND PREPARATION OF IROAN PUBLICATIONS (2 NOV 1992)., This military standard addresses the Inspect, Repair Only As Necessary (IROAN) procedure, presents guidelines for establishing an IRON program, and sets the criteria for developing the IROAN standards publication.