MIL-STD-1300A (NOTICE 1), MILITARY STANDARD, ENGINE, GASOLINE, AIR-COOLED, 6 BHP, MILITARY DESIGN, MODEL 4A032, INSTALLATION PROCEDURES (24 FEB 1976).

MIL-STD-1300A, MILITARY STANDARD, ENGINE, GASOLINE, AIR-COOLED, 6 BHP, MILITARY DESIGN, MODEL 4A032, INSTALLATION PROCEDURES (22 JAN 1970)., This standard covers the recommended installation procedures for the model 4A032,6-hp military design engine.

MIL-STD-1302, MILITARY STANDARD, REPORTS, PUMP DESIGN EVALUATION FOR NAVAL SHIPBOARD CENTRIFUGAL PUMPS (17 JUN 1966)., This standard covers the requirements for the submission of manufacturer's design and engineering data, in the form of reports required in conjunction with the approval of pumps and release for fabrication of pumps or pump parts for each new design of pump, as specified in the applicable pump specification.

MIL-STD-1303B(OS), MILITARY STANDARD, PAINTING OF NAVAL ORDNANCE EQUIPMENT (15 APR 1975)., This standard covers materials, methods, and processes for paint systems approved for use in the painting and protection of various types of naval ordnance equipment and weapons against deterioration.

MIL-STD-1306A (NOTICE 1), MILITARY STANDARD, FLUERICS TERMINOLOGY AND SYMBOLS (15 MAY 1997)., MIL-STD-1306A, dated 8 DEC 1972, is hereby canceled w/o replacement.

MIL-STD-1306A, MILITARY STANDARD, FLUERICS TERMINOLOGY AND SYMBOLS (8 DEC 1972)., This Standard establishes uniform terminology and symbols for use in the field of FLUERICS.

MIL-STD-1309D, MILITARY STANDARD, DEFINITIONS OF TERMS FOR TESTING, MEASUREMENT, AND DIAGNOSTICS (12 FEB 1992)., The purpose of this standard is to standardize the definitions of the most commonly used terms for testing, measurement and diagnostics.

MIL-STD-1310G (NAVY), MILITARY STANDARD, PRACTICE FOR SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY AND SAFETY (28 JUN 1996)., This document specifies the performance requirements for shipboard bonding, grounding and shielding; identifies requirements for EMI control in the areas of hull-generated and equipment-generated EMI, hull and cable penetration EMI, and superstructure blockage/reflections; specifies requirements for protection of personnel from electrical shock, and identifies the applicable requirements for measuring the effectiveness for EMI control and safety measures implemented when requirements herein are invoked.

MIL-STD-1311B (NOTICE 4), MILITARY STANDARD, TEST METHODS FOR ELECTRON TUBES (16 DEC 1999)., The following pages of MIL-STD-1311B have been revised and supersede the pages previously appearing in this standard... This standard establishes uniform methods for testing the environmental, physical, and electrical characteristics of electron tubes as required by MIL-PRF-1 and the applicable tube specifications (TSS). Unless otherwise specified or authorized, tests shall be conducted as specified herein (see 4.6).

MIL-STD-1311B, MILITARY STANDARD, TEST METHODS FOR ELECTRON TUBES (28 MAR 1975)., This standard establishes uniform methods for testing the environmental, physical, and electrical characteristics of electron tubes as required by MIL-E-1 and the applicable tube specification sheet (TSS). Unless otherwise specified or authorized test shall be conducted as specified herein (see 4.6).

MIL-STD-1311C, MILITARY STANDARD, TEST METHODS FOR ELECTRON TUBES (31 JAN 2001)., This standard establishes uniform methods for testing the environmental, physical, and electrical characteristics of electron tubes as required by MIL-PRF-1 and the applicable tube specification sheet (TSS). Unless otherwise specified or authorized, tests shall be conducted as specified herein (see 4.6).

MIL-STD-1312-13, MILITARY STANDARD, FASTENER TEST METHODS, METHOD 13, DOUBLE SHEAR TEST (26 JUL 1985)., This test method covers the procedure and apparatus for testing fasteners in double shear in a half-hole shear fixture.

MIL-STD-1312-13A (NOTICE 1), MILITARY STANDARD, FASTENER TEST METHODS METHOD 13, DOUBLE SHEAR TEST (29 AUG 1997)., MIL-STD-1312-13A, dated 23 AUG 1991, is hereby canceled. Future testing should be done in accordance w/ NASM1312-13 Fastener Test Methods, Method 13 Double Shear Test.

MIL-STD-1312-13A, MILITARY STANDARD, FASTENER TEST METHODS, METHOD 13, DOUBLE SHEAR TEST (23 AUG 1991)., This test method covers the procedure and apparatus for testing fasteners in double shear in a half-hole shear fixture.

MIL-STD-1312-15, MILITARY STANDARD, FASTENER TEST METHODS, METHOD 15, TORQUE - TENSION (26 JUL 1985) [S/S BY NASM1312-15]., This test method outlines standard procedures for determining the room temperature torque-tension relationship for threaded fasteners. It is not limited by configuration size

MIL-STD-1312-21 (NOTICE 1), MILITARY STANDARD, FASTENER TEST METHODS, METHOD 21, SHEAR JOINT FATIGUE CONSTANT AMPLITUDE (29 AUG 1997) [S/S BY NASM1312-21]., MIL-STD-1312-21, dated 26 JUL 1985, is hereby canceled. Future testing should be done in accordance w/ NASM1312-21 Fastener Test Method, Method 21, Shear Joint Fatigue Constant Amplitude.

MIL-STD-1312-21, MILITARY STANDARD, FASTENER TEST METHODS, METHOD 21, SHEAR JOINT FATIGUE (26 JUL 1985). This test method covers the procedure and apparatus required for testing the shear joint fatigue of fasteners at room temperature.

MIL-STD-1312-24, MILITARY STANDARD, FASTENER TEST METHODS, METHOD 24, RECEPTACLE TORQUE OUT, PANEL FASTENERS (26 JUL 1985) [S/S BY NASM1312-24]., This test method covers the procedure and apparatus required for testing the torque-out capability of receptacle assembly of structural panel fasteners.

MIL-STD-1312-25, MILITARY STANDARD, FASTENER TEST METHODS, METHOD 25, DRIVING RECESS TORQUE QUALITY CONFORMANCE TEST (26 JUL 1985) [S/S BY NASM1312-25]., This method describes standard test procedures for verification of the torque capability of driving recesses. It is intended to be used as a test procedure for quality conformance testing of fasteners with driving recesses.

MIL-STD-1312-31, MILITARY STANDARD FASTENER TEST METHODS, METHOD 31, TORQUE (26 JUL 1985) [S/S BY NASM1312-31]., This test method describes the test procedure for determining room temperature transmission and locking torque of threaded fasteners.

MIL-STD-1312-32 (NOTICE 1), MILITARY STANDARD, FASTENER TEST METHOD, METHOD 32, BARREL NUT TEST (22 DEC 1998) [S/S BY NASM1312-32]., MIL=STD1312-32, dated 30 APR 1997, is hereby canceled. Future testing should be done in accordance w/ NASM1312-32, Fastener Test Method, Method 32, Barrel Nut Test.

MIL-STD-1312-32, MILITARY STANDARD, FASTENER TEST METHOD, METHOD 32, BARREL NUT TEST (30 APR 1997) [S/S BY NASM1312-32]., This method covers a procedure for testing barrel nuts in tension at room temperature. This procedure is intended to define the test required to determine the tensile strength of the barrel nut itself, not the strength of the fastener in a structural joint.

MIL-STD-1312B (NOTICE 1), MILITARY STANDARD, FASTENER TEST METHODS (29 AUG 1997) [S/S BY NASM 1312]., MIL-STD-1312B dated 19 October 1984 is hereby canceled. Future testing should be done in accordance with NASM1312 Fastener Test Methods.

MIL-STD-1312B, MILITARY STANDARD, FASTENER TEST METHODS (19 OCT 1984) [SUPERSEDING DOD-STD-1312A] [S/S BY NASM 1312]., This standard establishes methods for testing fasteners, covering both the SI and I-P units, to determine their physical and mechanical properties.

MIL-STD-1316D (NOTICE 1), MILITARY STANDARD, FUZE DESIGN, SAFETY CRITERIA FOR (30 JUL 1993)., Make the following pen/ink changes...

MIL-STD-1316D (NOTICE 2), MILITARY STANDARD, FUZE DESIGN, SAFETY CRITERIA FOR (31 MAY 1995)., The following pages have been revised and supersede the pages listed...

MIL-STD-1316D, MILITARY STANDARD, FUZE DESIGN, SAFETY CRITERIA FOR (9 APR 1991)., This standard establishes design safety criteria for fuzes and Safety and Arming (S&A) devices that are subsystems of fuzes. This standard applies to the design of fuzes and S&A devices.

MIL-STD-1316E (NOTICE 1), MILITARY STANDARD, FUZE DESIGN, SAFETY CRITERIA FOR (14 JAN 1999)., The following pages of MIL-STD1316E have been revised and supersede the pages listed...

MIL-STD-1316E, MILITARY STANDARD, FUZE DESIGN, SAFETY CRITERIA FOR (10 JUL 1998)., This standard establishes specific design safety criteria for fuzes. It applies primarily to the safety and arming functions performed by fuzes for use with munitions. The safety and arming requirements specified herein are mandatory fundamental elements of design, engineering, production and procurement of fuzes. Fuzes shall provide safety that is consistent with assembly, handling, storage, transportation, and disposal. Munition fuzes historically have utilized sensitive explosive elements whose output has been physically interrupted until arming. Control of the arming process in these fuzes was accomplished by mechanical means. The advent and rapid advancement in solid state electronics has furnished alternatives for fuze safety design. In recent years, advances in explosive initiation elements have provided an option for eliminating the need for physical interruption of the explosive train. The application of these technology advances is addressed in the Current revision to these standards.

MIL-STD-1319A, MILITARY STANDARD, ITEM CHARACTERISTICS AFFECTING TRANSPORTABILITY AND PACKAGING AND HANDLING EQUIPMENT DESIGN (21 AUG 1974) [S/S BY MIL-HDBK-1319]., This standard identifies the item characteristics affecting design and development of packaging and handling equipment as well as the item characteristics affecting transportability (see 6.1 and 6.2)

MIL-STD-1320-17A (NOTICE 1), MILITARY STANDARD, TRUCKLOADING TERRIER MISSILE AND STANDARD (ER) MISSILE IN CONTAINER MK 199 MOD 0 AND 1 (13 JUL 1999)., MIL-STD-1320/17A, dated 11 MAR 1993, is inactive for new design and is no longer used, except for replacement purposes.

MIL-STD-1320-17A MILITARY STANDARD, TRUCKLOADING TERRIER MISSILE AND STANDARD(ER) MISSILE IN CONTAINER MK 199 MOD O AND 1 (11 MAR 1993)., This document gives detailed instructions for truck loading the terrier missile and the standard (ER) missile in the shipping and storage container MK 199 Mod 0 and 1.

MIL-STD-1320-214 (NOTICE 1), MILITARY STANDARD, TRUCKLOADING MINE, UNDERWATER MK 55 CONFIGURATION A IN CRATE MK 111 MOD 0 (8 AUG 1997)., MIL-STD-1320/214, dated 13 Sept 1985, is hereby canceled w/o replacement.

MIL-STD-1320-214, MILITARY STANDARD, TRUCKLOADING MINE, UNDERWATER MK 55 CONFIGURATION A IN CRATE MK 111 MOD O (13 SEPT 1985)., This document gives detailed instructions for truckloading the underwater mine mk 55 in mine crate shipping an storage mk 111 mod o for general truckloading procedures refer to the general truckloading document, MIL-STD-1320.

MIL-STD-1320-231 (NOTICE 1), MILITARY STANDARD, TRUCKLOADING GUIDED MISSLE, AGM-136A (TACIT RAINBOW) IN SHIPPING AND STORAGE CONTAINER, CNU-432/E UNIT LOAD FOR UNDERWAY REPLENISHMENT (8 AUG 1997)., MIL-STD-1320/231, dated 24 AUG 1990, is hereby canceled w/o replacement.

MIL-STD-1320-231, MILITARY STANDARD, TRUCKLOADING GUIDED MISSILE. AGM-136A (TACIT RAINBOW) IN SHIPPING AND STORAGE CONTAINER, CNU-432/E UNIT LOAD FOR UNDERWAY REPLENISHMENT (24 AUG 1990)., This document gives detailed instructions for truckloading unit loads for underway replenishment of guided missile, AGH-136A (tacit rainbow) in container, CNU-432/E when the containers are utilized in accordance with MIL-STD-1323-342 (Navy).

MIL-STD-1320-253A, MILITARY STANDARD, TRUCKLOADING UNIT LOADS OF AMRAAM, AIM-120A IN S/S/C, CNU-415A/E OR AMRAAM JAIM-120A CAPTIVE AIR TRAINING MISSILE (CATM) IN S/S/C CNU-555/E (26 OCT 1993)., This document gives detailed instructions for truckloading the AMRAAM AIM-120A in S/S/C. CNU-415/E or AMRAAM JAIM-120A in S/S/C CNU-555/E

MIL-STD-1320-253B MILITARY STANDARD, TRUCKLOADING AMRAAM, AIM-120 IN SHIPPING AND STORAGE CONTAINER CNU-415 A/E OR CNU-415 B/E, OR AMRAAM, CATM-120 CAPTIVE AIR TRAINING MISSILE IN SHIPPING AND STORAGE CONTAINER CNU-555/E (14 JUL 1996)., This document gives detailed instructions for truckloading AMRAAM Missiles packed in the CNU-416 A/E, CNU-415 B/E or CNU-555/E Shipping and storage container.

MIL-STD-1320-261, MILITARY STANDARD, TRUCKLOADING HELLFIRE MISSILE. AGM 114 IN CONTAINER SHIPPING AND STORAGE. CNU-448/E UNIT LOAD UNDERWAY REPLENISHMENT (28 JUL 1991)., This document gives detailed instructions for truckloading unit loads in certain replenishment of hellfire missle AGM 114 in container shipping and storage CNU-558/E

MIL-STD-1320-267 (NOTICE 1), MILITARY STANDARD, TRUCKLOADING BOMB, 2000 LB. BLU-109-A/B (THERMALLY PROTECTED) IN PALLET, BOMB, S/S, MHU-212/E (DWG# 3336AS100) (13 JUL 1999)., MIL-STD-1320/267, dated 25 November 1992, is inactive for new design and is no longer used, except for replacement purposes.

MIL-STD-1320-267, MILITARY STANDARD, TRUCKLOADING BOMB, 2000 LB. BLU-109-A/B (THERMALLY PROTECTED) IN PALLET, BOMB, S/S, MHU-212/E (DWG#3336AS100) (25 NOV 1992)., This document gives detailed instructions for truckloading the BLU/109/B (thermally protected) 2000 lb. bomb in S/S Bomb Pallet MHU-212/E. The unit load shall be assembled in accordance with MIL-STD-1323-383 (Navy)

MIL-STD-1320-270, MILITARY STANDARD, TRUCKLOADING TASK "A" ASSY TEST CHARGES ON WOODEN SKIN WITH COVER & END FRAME ASSY'S (16 PACK UNIT LOADS) (20 JULY 1992)., This document gives detailed instructions for truckloading unit loads of test chargers (6 or 16 pack unit loads) in wood skid assy. The unit loads shall be in accordance with MIL-STD-1322-108 (Navy).

MIL-STD-1320-272, MILITARY STANDARD, TRUCKLOADING GUIDED MISSILE LAUNCHER (GML) FOR ROLLING AIRFRAME MISSILE SYSTEM (RAM) ON TRANSPORTATION SKID, DWG# 6660272 (28 JUN 1993) ., This document gives detailed instructions for truckloading the guided missile launcher (GML) for the rolling airframe missile system (RAM) on tis transportation skid.

MIL-STD-1320-274, MILITARY STANDARD, TRUCKLOADING ALPHA CONFIGURED UNDERWATER MINE, MK64 MODS OR DESTRUCTOR, MK 41 MODS ON PALLET ADAPTER, MK 79 (8 JUN 1993)., This document gives detailed instructions for truckloading the MK 64 underwater mine and the MK 41 Destructor on the MK 79 Pallet Adapter Base.

MIL-STD-1320-275, MILITARY STANDARD, TRUCKLOADING ADG-770/B ADAPTER GROUP IN CNU-439 A/E CONTAINER (18 JUN 1993)., This document gives detailed instructions for truckloading the ADG-770/B Adapter Group packaged in the CNU-438A/E Shipping and Storage Container. The Unit Load shown on Page 1 shall be in accordance with MIL-STD-1323-384 Navy.

MIL-STD-1320-276, MILITARY STANDARD, TRUCKLOADING ALPHA CONFIGURED UNDERWATER MINE, MK 62 MODS OR DESTRUCTOR, MK 36 MODS ON PALLET ADAPTER, MK 9 (6 JUL 1993)., This document gives detailed instructions for truckloading the alpha configured destructor mk 36 or the mk 62 quickstrixe on the MX 9 Pallet.

MIL-STD-1320-277, MILITARY STANDARD, TRUCKLOADING BSU-84/B AIRFOIL GROUP IN CNU-372/E CONTAINER (9 JUL 1993)., This document gives detailed instructions for truckloading the BSU-84/8 Air Foil Group in CNU-373/E Containers.

MIL-STD-1320-278, MILITARY STANDARD, TRUCKLOADING ACOUSTIC DEVICE COUNTERMEASURE (ADC) IN CONTAINER CNU-488/E (25 OCT 1993)., This document gives detailed instructions for truckloading the acoustic device countermeasure in the shipping and storage container CNU-488/E

MIL-STD-1320-279, MILITARY STANDARD, TRUCKLOADING DESTRUCTOR, MK 40 OR MK 63 QUICKSTRIKE MINE ON MK 11 MOD 0 PALLET (23 AUG 1993)., This document gives detailed instructions for truckloading the MK 40 destructor or the MK 83 quickstrike mine on the MK 11 Mod O Pallet.

MIL-STD-1320-280, MILITARY STANDING, TRUCKLOADING ALPHA CONFIGURED MINE, MK 56 MOD 0 (WITH FAIRING MK 21 MOD 0 AND PARACHUTE PACK WITH FINS) IN MINE CRATE MK 56 MOD 0 (8 OCT 1993)., This document gives detailed instructions for truckloading the MK 56 MOD 0 ALPHA configured mine on the MK 56 MOD 0 mine crate.

MIL-STD-1320-286, MILITARY STANDARD, TRUCKLOADING NULKA ELECTRONIC DECOY CARTRIDGE (EDC) MK 234 MODS 0 AND 1 IN CONTAINER, SHIPPING AND STORAGE MK 779 MOD 0 (15 MAY 1997)., This document gives detailed instructions for truckloading the Nulka EDC, MK 234 MOD 0 and 1, packed in the MK 779 MOD 0 shipping and storage container. The procedures described herein are intended for 48 ft and shorter flatbed trailers and trucks. Do no use trailers with all metal floors.

MIL-STD-1320-64, MILITARY STANDARD, TRUCKLOADING 16" HC PROJECTILE MK 13 AND MK 14 IN PALLET ADAPTER MK 88 MOD 0 (26 MAY 1993)., This document gives detailed instructions for truckloading fleet issue unit loads of the 16" HC Projectile MK 13 and MK 14. The unit load shall be in accordance with MIL STD-1323-149 (Navy)

MIL-STD-1320C, MILITARY STANDARD, TRUCKLOADING OF AMMUNITION AND EXPLOSIVES (30 AUG 1979)., This standard consisting of a general document and dash numbered sheets establishes the approved methods for the preparation of full truckload (FTL) and less-than-full-truckload (LTL) shipments of ammunition, explosives, and associated items.

MIL-STD-1322-109, MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT STANDARD MR OR ER GUIDANCE SECTION IN CONTAINER MK 461 MOD 0 OR MOD 1 (8 NOV 1993).

MIL-STD-1322-111 (NOTICE 1) MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT AMRAAM CONTROL SECTION IN CONTAINER, CNU-402/E OR AMRAAM WARHEAD SECTION IN CONTAINER, CNU-403/E (13 JUL 1999)., MIL-STD-1322/111, dated 29 JUL 1991, is inactive for design and is no longer used, except for replacement purposes.

MIL-STD-1322-111, MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT AMRAAM CONTROL SECTION IN CONTAINER CNU 402/E OR AMRAAM WARHEAD SECTION IN CONTAINER CNU-403/E (29 JUL 1991).

MIL-STD-1322-114, MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT AN/SSQ-110 SONOBUOY (IN SONOBOUY LAUNCH CONTAINER) PACKED IN 36 UNIT BAYONET PALLET DL# 145AS100 (12 OCT 1993)., Packaging and unitizing.

MIL-STD-1322-808, MILITARY UNIT, LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT MK 23 MODS JATO ROCKET MOTORS IN WOOD ADAPTER (30 APR 1993).

MIL-STD-1322-866, MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT MK 23 MODS JATO ROCKET MOTOR IN 16" POWDER TANK, MK 4 MODS (30 APR 1993) [S/S WR-53/866].

MIL-STD-1322-898, MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT WARHEAD, GUIDED MISSILE HIGH EXPLOSIVE WDU-33/B IN SHIPPING AND STORAGE CONTAINER CNU-545/E (2 JUN 1993).

MIL-STD-1322-899 (NOTICE 1), MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT CONTROL SECTION GUIDED MISSILE WCU-11/B IN SHIPPING AND STORAGE CONTAINER CNU-546/E (8 AUG 1997)., MIL-STD-1322/899, dated 02 JUN 1993, is hereby canceled without replacement.

MIL-STD-1322-899, MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT CONTROL SECTION, GUIDED MISSILE WCU-11/B IN SHIPPING AND STORAGE CONTAINER CNU-546/E (2 JUN 1993)

MIL-STD-1322-900, MILITARY STANDARD, UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT PRIMER MK 22 MODS 0. 1. AND 2: PERCUSSION FOR 40MM CARTRIDGE (14 SEPT 1993)

MIL-STD-1323-342 (NOTICE 1), MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT GUIDED MISSILE, AGM-136A (TACIT RAINBOW) IN CONTAINER CNU-432/E (8 AUG 1997)., MIL-STD-1323/342, dated 24 AUG 1990, is hereby canceled w/o replacement.

MIL-STD-1323-342, MILITARY STANDARD ,UNIT LOAD FOR UNDERWAY REPLENISHMENT GUIDED MISSILE AGM-136A (TACIT RAINBOW) IN CONTAINER CNU-432/E (24 AUG 1990)

MIL-STD-1323-360A, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT AMRAAM, AIM-120A IN S/S/C, CNU-415A/E OR AMRAAM JAIM-120A CAPTIVE AIR TRAINING MISSLE (CATM) IN S/S/C CNU-555/E (25 OCT 1993)

MIL-STD-1323-371 (NOTICE 1), MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT WARM MISSILE, AGM-88 WINGS AND FINS IN CONTAINER, CNU-296/E (8 AUG 1997)., MIL-STD-1323-371, dated 1 MAY 1991, is hereby canceled w/o replacement.

MIL-STD-1323-371, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT HARM MISSILE AGM-88 WINGS AND FINS IN CONTAINER CNU-296/E (1 MAY 1991).

MIL-STD-1323-373 (NOTICE 1), MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT DECOY, TRANSPONDER, COUNTERMEASURES RT-1489 GENERIC EXPENDABLE DECOY (GEN-X) IN CONTAINER, CNU-487/E (8 AUG 1997), MIL-STD-1323/373, dated 20 MAR 1991, is hereby canceled w/o replacement.

MIL-STD-1323-373, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT DECOY, TRANSPONDER, COUNTERMEASURES RT-1489/ALE GENERIC EXPENDABLE DECOY (GEN-X) IN CONTAINER, CNU-487/E (20 MAR 1991).

MIL-STD-1323-379, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT, ROCKET MOTOR, MK125 MOD 2 (RATO) IN CONTAINER CNU-543/E (13 AUG 1992)

MIL-STD-1323-384, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT, ADG-770/B PAVEWAY ADAPTER KIT IN S/S/C CNU-439A/E (4 MAY 1993)

MIL-STD-1323-386, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT CHARGE, FLEXIBLE, 20 GRAM, MK 140 MOD O IN M2A1 AMMUNITION BOX OVERPACKED IN WIREBOUND BOX (7 OCT 1993).

MIL-STD-1323-388, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT FUZE, FMU-143E/B IN PA60 CONTAINER (19 MAY 1993)

MIL-STD-1323-389, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT GUIDANCE CONTROL UNIT: WGU-39/B. F/LASER GUIDED BOMBS IN CONTAINER. CNU-371/E (19 MAY 1993)

MIL-STD-1323-395, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT MK 87 MOD 0 OR MK 89 MOD 0 EOD CHARGES IN AMMUNITION BOX MK 1 MOD 0 (26 AUG 1993)

MIL-STD-1323-405, MILITARY STANDARD, UNIT LOAD FOR UNDERWAY REPLENISHMENT AIRFOIL GROUP, MXU-650/B (FOR MK 82 OR BLU-111A/B BOMB) IN DRUM ON MK 3 MOD 0 PALLET (10 JUL 1996).

MIL-STD-13231, MILITARY STANDARD, MAKING OF ELECTRIC ITEMS (2 NOV 1999)., This standard covers the general requirements for marking of electric items, except marking for shipment and as otherwise specified by an applicable government document covering the item on which the marking appears. These requirements cover both the information to be shown by the marking and the material and processes used therefore. This standard should be implemented by incorporating suitable requirements directly in acquisition documents.

MIL-STD-1325-100 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS TYPICAL CARLOADING PROCEDURES FOR PALLETIZED UNIT LOADS (2 ROWS ACROSS CAR) (13 MAR 1991)., MIL-STD-1325/100, dated 7 FEB 1975, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-100, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS TYPICAL CARLOADING PROCEDURES FOR PALLETIZED UNIT LOADS (2 ROWS ACROSS CAR) (7 FEB 1975) [S/S WR-52/100A]

MIL-STD-1325-101 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS TYPICAL CARLOADING PROCEDURES FOR PALLETIZED UNIT LOADS (3 ROWS ACROSS CAR) (30 APR 1987)., MIL-STD-1325-101, dated 28 FEB 1975, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-101 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS TYPICAL CARLOADING PROCEDURES FOR PALLETIZED UNIT LOADS (3 ROWS ACROSS CAR) (13 MAR 1991)., MIL-STD-1325-101, dated 26 FEB 1975, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-101, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS TYPICAL CARLOADING PROCEDURES FOR PALLETIZED UNIT LOADS (3 ROWS ACROSS CAR) (26 FEB 1975) [S/S WR-52/101]

MIL-STD-1325-102A (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS TYPICAL PARTIAL UPPER LAYER BRACING OF UNIT LOADS IN BOX CARS (1 MAR 1989)., Reviewed and determined to be valid for use in acquisition

MIL-STD-1325-102A, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS PARTIAL UPPER LAYER BRACING OF UNIT LOADS IN ALL METAL BOX CARS (26 JAN 1976).

MIL-STD-1325-149 (NOTICE 1), MILITARY STANDARD, CARLOADING GUIDED WEAPON MK 5 AND MOD (WALLEYE) IN CONTAINER CNU-154 A/e OR CNU-154 B/e (23 FEB 1989)., MIL-STD-1325/149(OS) dated 24 APR. 1973, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-149, MILITARY STANDARD, CARLOADING GUIDED WEAPON MK 5 & MODS (WALLEYE) IN CONTAINER CNU-154 A/E OR CNU-154 B/E (24 APR 1973) [S/S WR-52/149].

MIL-STD-1325-15 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS PROJECTILES 5/54 IN PALLET ADAPTER MK11 AND MODS FLEET ISSUE UNIT LOAD (1 MAR 1989)., MIL-STD-1325-15, dated 22 DEC 1975, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-15, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, PROJECTILES 5/54 IN PALLET ADAPTER MK 11 AND MODS, FLEET ISSUE UNIT LOAD (22 DEC 1975) [S/S WR 52/15]

MIL-STD-1325-160 (NOTICE 1), MILITARY STANDARD, CARLOADING STANDARD ARM MISSILE, AGM-78 IN CONTAINER CNU-183/E (13 MAR 1991)., MIL-STD-1325-160, dated 19 DEC 1972, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-160, MILITARY STANDARD, CARLOADING, STANDARD ARM MISSILE AGM-78 IN CONTAINER CNU-183/E (19 DEC 1972).,

MIL-STD-1325-164 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING, CARTRIDGE 5"/54 IN TANK MK 14, MK 14 MOD 1, MK 21 MOD 0 OR REDUCED MK 14 FLEET ISSUE UNIT LOAD (20 DEC 1976)., changes to document

MIL-STD-1325-164 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING, CARTRIDGE 5"/54 IN TANK MK 14, MK 14 MOD 1, MK 21 MOD 0 OR REDUCED MK 14 FLEET ISSUE UNIT LOAD (13 MAR 1991)., MIL-STD-1325-164, dated 17 JUL 1973 and Notice 1, dated 20 DEC 1976, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-164, MILITARY STANDARD, RAILCAR LOADING, CARTRIDGE 5"/54 IN TANK MK 14, MK 14 MOD 1, MK 21 MOD 0 OR REDUCED MK 14 FLEET ISSUE UNIT LOAD (17 JUL 1973)

MIL-STD-1325-166 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING FIN ASSEMBLY, BOMB, MK 15 AND MODS (SNAKEYE) IN PALLET ADAPTER ADU-383/E, FLEET ISSUE UNIT LOAD (13 MAR 1991)., MIL-STD-1325-166, dated 17 JUL 1976, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-166 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING FIN ASSEMBLY, BOMB, MK 15 AND MODS (SNAKEYE) IN PALLET ADAPTER ADU-383/E, FLEET ISSUE UNIT LOAD (15 OCT 1992)., MIL-STD 1325-166 is inactive for new design and is no longer used by the Navy except for replacement purposes.

MIL-STD-1325-166, MILITARY STANDARD, RAILCAR LOADING FIN ASSEMBLY, BOMB, MK 15 AND MODS (SNAKEYE) IN PALLET ADAPTER ADU-383/E, FLEET ISSUE UNIT LOAD (7 JUL 1976)

MIL-STD-1325-175 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, BOMB, 2000 LB MK 84 MOD 3(THERMALLY PROTECTED) IN UNIT LOAD ADAPTER MK 79 MOD 0 WITH SADDLES FLEET ISSUE UNIT LOAD (5 NOV 1975)., changes and additions

MIL-STD-1325-175 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, BOMB, 2000 LB MK 84 MOD 3(THERMALLY PROTECTED) IN UNIT LOAD ADAPTER MK 79 MOD 0 WITH SADDLES FLEET ISSUE UNIT LOAD (30 APR 1987)., MIL-STD-1325-175, dated 5 NOV 1975, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-175 (NOTICE 3), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, BOMB, 2000 LB MK 84 MOD 3(THERMALLY PROTECTED) IN UNIT LOAD ADAPTER MK 79 MOD 0 WITH SADDLES FLEET ISSUE UNIT LOAD (13 MAR 1991)., MIL-STD-1325-175, dated 14 JUL 1975 and Notice 1, dated 5 NOV 1975, have been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-175 (NOTICE 4), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, BOMB, 2000 LB MK 84 MOD 3(THERMALLY PROTECTED) IN UNIT LOAD ADAPTER MK 79 MOD 0 WITH SADDLES FLEET ISSUE UNIT LOAD (25 FEB 1993)., MIL-STD-1325-175 is inactive for new design and are no longer used by the Navy except for replacement purposes.

MIL-STD-1325-175, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, BOMB, 2000 LB MK 84 MOD 3(THERMALLY PROTECTED) IN UNIT LOAD ADAPTER MK 79 MOD 0 WITH SADDLES FLEET ISSUE UNIT LOAD (14 JUL 1975)

MIL-STD-1325-177 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS CARTRIDGE 76MM/67 CAL OR CHARGE, CLEARING 76MM/62 CAL IN PALLET ADAPTER MK 121 MOD 0 FLEET ISSUE UNIT LOAD (APR 1987)., MIL-STD-1325-177 dated 8 JUN 1976 has been reviewed and determined to be valid for acquisition.

MIL-STD-1325-177 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS CARTRIDGE 76MM/67 CAL OR CHARGE, CLEARING 76MM/62 CAL IN PALLET ADAPTER MK 121 MOD 0 FLEET ISSUE UNIT LOAD (13 MAR 1991),. MIL-STD-1325-177, dated 3 JUN 1975, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-177, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS CARTRIDGE 76MM/67 CAL OR CHARGE, CLEARING 76MM/62 CAL IN PALLET ADAPTER MK 121 MOD 0 FLEET ISSUE UNIT LOAD (5 JUN 1975)

MIL-STD-1325-178 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS BOMB MK 82 & MODS (500 LB.) ON BOMB PALLET MHU-149/E AIR FORCE UNIT LOAD TPO 01-006-5657 (13 MAR 1991)., MIL-STD-1325-178, dated 14 DEC 1976, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-178 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS BOMB MK 82 & MODS (500 LB.) ON BOMB PALLET MHU-149/E AIR FORCE UNIT LOAD TPO 01-006-5657 (15 OCT 1992)., MIL-STD-1325-178 is inactive for new design and is no longer used by the Navy except for replacement purposes.

MIL-STD-1325-178 (NOTICE 3), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS BOMB MK 82 & MODS (500 LB.) ON BOMB PALLET MHU-149/E AIR FORCE UNIT LOAD TPO 01-006-5657 (8 AUG 1997)., MIL-STD-1325-178, including Notice 2, dated 15 OCT 1992, is hereby canceled w/o replacement

MIL-STD-1325-178, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS BOMB MK 82 & MODS (500 LB.) ON BOMB PALLET MHU-149/E AIR FORCE UNIT LOAD TPO 01-006-5657 (14 DEC 1976)

MIL-STD-1325-179 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS DISPENSER AND BOMB, AIRCRAFT CBU-MK20 AND MODS (ROCKEYE11) OR CBU-55/B, CBU-55A/B OR CBU-72/B (FAE) OR CBU-59B (APAM) IN CONTAINER, CNU-238/E FLEET ISSUE UNIT LOAD (3 SEPT 1982)., Page 1, Title Block, Add "or CBU-78/b (gator)".

MIL-STD-1325-179 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS DISPENSER AND BOMB, AIRCRAFT CBU-MK20 AND MODS (ROCKEYE11) OR CBU-55/B, CBU-55A/B OR CBU-72/B (FAE) OR CBU-59B (APAM) IN CONTAINER, CNU-238/E FLEET ISSUE UNIT LOAD (13 MAR 1991)., MIL-STD-1325-179, dated 19 MAR 1976 and Notice 1, dated 3 SEPT 1982, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-179, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS DISPENSER AND BOMB, AIRCRAFT CBU-MK20 AND MODS (ROCKEYE11) OR CBU-55/B, CBU-55A/B OR CBU-72/B (FAE) OR CBU-59B (APAM) IN CONTAINER, CNU-238/E FLEET ISSUE UNIT LOAD (5 MAR 1976)

MIL-STD-1325-180 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, DISPENSER AND BOMB, AIRCRAFT CBU-59/B, COMPLETE (APAM) OR DISPENSER AND BOMB, AIRCRAFT CBU-59(T-1)/B TRAINING IN CONTAINER MK 427 MOD 1, FLEET ISSUE UNIT LOAD (23 FEB 1989)., MIL-STD-1325-180 dated 05 APR 1976, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-180 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, DISPENSER AND BOMB, AIRCRAFT CBU-59/B, COMPLETE (APAM) OR DISPENSER AND BOMB, AIRCRAFT CBU-59(T-1)/B TRAINING IN CONTAINER MK 427 MOD 1, FLEET ISSUE UNIT LOAD (08 AUG 1997)., MIL-STD-1325-180, including Notice 1, dated 23 FEB 1989, is hereby canceled w/o replacement

MIL-STD-1325-180, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, DISPENSER AND BOMB, AIRCRAFT CBU-59/B, COMPLETE (APAM) OR DISPENSER AND BOMB, AIRCRAFT CBU-59(T-1)/B TRAINING IN CONTAINER MK 427 MOD 1, FLEET ISSUE UNIT LOAD (5 APR 1976)

MIL-STD-1325-185 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS AIRFRAME MK 4 MOD 0, MK 5 MOD 0, OR MK 8 MOD 0 OR 1 (ASROC) IN CONTAINER MK 321 MOD 0 OR 1 (13 MAR 1991)., MIL-STD-1325-185, dated 7 OCT 1975, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-185 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS AIRFRAME MK 4 MOD 0, MK 5 MOD 0, OR MK 8 MOD 0 OR 1 (ASROC) IN CONTAINER MK 321 MOD 0 OR 1 (8 AUG 1997)., MIL-STD-1325-185, including Notice 1, dated 13 MAR 1991, is hereby canceled without replacement.

MIL-STD-1325-185, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS AIRFRAME MK 4 MOD 0, MK 5 MOD 0, OR MK 8 MOD 0 OR 1 (ASROC) IN CONTAINER MK 321 MOD 0 OR 1 (7 OCT 1976)

MIL-STD-1325-196 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING DISPENSER AND BOMB, AIRCRAFT BU-MK 20 AND MODS (ROCKEYE II) IN CONTAINER CNU-319/E UNIT LOAD UNDERWAY REPLENISHMENT (1 Sept 1982)., changes and additions

MIL-STD-1325-196 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING DISPENSER AND BOMB, AIRCRAFT BU-MK 20 AND MODS (ROCKEYE II) IN CONTAINER CNU-319/E UNIT LOAD UNDERWAY REPLENISHMENT (13 MAR 1991)., MIL-STD-1325-196, dated 30 May 1980 and Notice 1, dated 3 Sept 1982, has been reviewed and determined for use in acquisition

MIL-STD-1325-196, MILITARY STANDARD, RAILCAR LOADING DISPENSER AND BOMB, AIRCRAFT BU-MK 20 AND MODS (ROCKEYE II) IN CONTAINER CNU-319/E UNIT LOAD UNDERWAY REPLENISHMENT (30 MAY 1980)

MIL-STD-1325-83 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, CHARGE PROPELLING 8"/55 CARTRIDGE TANK MKII MOD 0 OR MK13 MOD 0 IN ADAPTER MK76 MOD 0 FLEET ISSUE UNIT LOAD (1 MAR 1989)., MIL-STD-1325-83 dated 27 Sept 1974, has been reviewed and determined to be valid for use in acquisition

MIL-STD-1325-83, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, CHARGE PROPELLING 8"/55 CARTRIDGE TANK MKII MOD 0 OR MK13 MOD 0 IN ADAPTER MK76 MOD 0 FLEET ISSUE UNIT LOAD (27 SEPT 1974)

MIL-STD-1325-86 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, MINE, UNDERWATER MK52 AND MODS IN CRATE, UNDERWATER MINE MK 52 MOD 0 (1 MAR 1989)., MIL-STD-1325-86 dated 3 AUG 1976, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1325-86, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, MINE, UNDERWATER MK52 AND MODS IN CRATE, UNDERWATER MINE MK 52 MOD 0 (3 AUG 1976) [S/S WR-52/86]

MIL-STD-1325-97 (NOTICE 1), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, EXPLOSIVE SECTION MK 1 MOD 1 IN CRATE MK 101 MOD 1 FLEET ISSUE UNIT LOAD., MIL-STD-1325-97 dated 5 APR 1976, has been reviewed and determined to be valid for use in acquisition

MIL-STD-1325-97 (NOTICE 2), MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, EXPLOSIVE SECTION MK 1 MOD 1 IN CRATE MK 101 MOD 1 FLEET ISSUE UNIT LOAD (15 OCT 1992)., MIL-STD-1325-97 is inactive for new design and is no longer used by the Navy except of replacement purposes

MIL-STD-1325-97, MILITARY STANDARD, RAILCAR LOADING OF HAZARDOUS MATERIALS, EXPLOSIVE SECTION MK 1 MOD 1 IN CRATE MK 101 MOD 1 FLEET ISSUE UNIT LOAD (5 APR 1976) [S/S WR 52-97]

MIL-STD-1326 (NOTICE 1), MILITARY STANDARD, TEST POINTS, TEST POINT SELECTION AND INTERFACE REQUIREMENTS FOR EQUIPMENTS MONITORED BY SHIPBOARD ON-LINE AUTOMATIC TEST EQUIPMENT (1 APR 1969)., revisions...

MIL-STD-1326, MILITARY STANDARD, TEST POINTS, TEST POINT SELECTION AND INTERFACE REQUIREMENTS FOR EQUIPMENTS MONITORED BY SHIPBOARD ON-LINE AUTOMATIC TEST EQUIPMENT (15 JAN 1968)., This standard establishes the requirements for providing test points in prime equipments for monitoring by on-line automatic test equipment (ATE). It provides criteria for guidance in optimum test point selection. It defines interface and data requirements, a system of test point data generation, and procedures for submission of data disclosing the selections of these test points.

MIL-STD-1327A (NOTICE 1), MILITARY STANDARD, FLANGES, COAXIAL WAVEGUIDE; AND COUPLING ASSEMBLIES, SELECTION OF (2 JAN 1976)., The following pages of MIL-STD-1327A, have been revised and supersede the pages listed.

MIL-STD-1327A (NOTICE 2), MILITARY STANDARD, FLANGES, COAXIAL WAVEGUIDE; AND COUPLING ASSEMBLIES, SELECTION OF (11 JUN 1999)., MIL-STD-1327A, dated 19 August 1975, is hereby canceled without replacement.

MIL-STD-1327A, MILITARY STANDARD, FLANGES, COAXIAL WAVEGUIDE; AND COUPLING ASSEMBLIES, SELECTION OF (19 AUG 1975)., This standard provides standard sizes of rectangular waveguide flanges, ridged waveguide flanges, rigid air dielectric coaxial flanges, and coupling assemblies for use with subminiature waveguide flanges considered by the Department of Defense as standard for use in military equipment and applications.

MIL-STD-1328B, MILITARY STANDARD, COUPLERS DIRECTIONAL (COAXIAL LINE, WAVEGUIDE, AND PRINTED CIRCUIT), SELECTION OF (22 OCT 1979)., This standard establishes requirements for the selection of directional couplers for use in military equipments.

MIL-STD-1328C (NOTICE 2), MILITARY STANDARD, COUPLERS, DIRECTIONAL SELECTION OF (11 JUN 1999)., MIL-STD-1328C, dated 22 SEPT 1989, is hereby canceled w/o replacement

MIL-STD-1328C, MILITARY STANDARD, COUPLERS, DIRECTIONAL SELECTION OF (22 SEPT 1989)., This standard establishes requirements for the selection of directional couplers for use in military equipment.

MIL-STD-1329B, MILITARY STANDARD, SWITCHES, RF COAXIAL SELECTION OF (30 JUN 1976)., This standard provides a list of standard coaxial switches for use in military applications.

MIL-STD-1329C (NOTICE 1), MILITARY STANDARD, SWITCHES, RF COAXIAL, SELECTION OF (11 JUN 1999)., MIL-STD1329C, dated 15 JUL 1988, is hereby canceled w/o replacement

MIL-STD-1329C, MILITARY STANDARD, SWITCHES, RF COAXIAL SELECTION OF (15 JUL 1988)., This standard provides a list of standard coaxial switches for use in military applications.

MIL-STD-1330C, MILITARY STANDARD, CLEANING AND TESTING OF SHIPBOARD OXYGEN, NITROGEN, AND HYDROGEN GAS PIPING SYSTEMS (1 FEB 1985)., This standard provides the requirements for cleaning and testing oxygen, nitrogen, and hydrogen gas system piping and components.

MIL-STD-1330D, MILITARY STANDARD, PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN, AND HYDROGEN SYSTEMS (20 SEPT 1966)., This standard provides the requirements for precision cleaning and testing of oxygen or oxygen-enriched systems and components; oxygen generating plants including nitrogen, hydrogen, and demineralized water support systems and components; and helium, helium-oxygen, and hydrogen life support systems and components. Compressed air systems directly supporting oxygen generating equipment are cleaned in accordance with MIL-STD-1622. Each activity should implement the applicable requirements of this document through a locally prepared and approved procedure. Activities subject to additional quality assurance requirements such as NAVSEA SS800-AG-MAN-010/P-9290 or NAVSEA SS521-AA-MAN-010 should obtain procedure approval from the applicable certifying activity.

MIL-STD-1331 (NOTICE 1), MILITARY STANDARD, PARAMETERS TO BE CONTROLLED FOR THE SPECIFICATION OF MICROCIRCUITS (19 AUG 1970)., The following pages of MIL-STD-1331 have been revised and supersede the pages listed:

MIL-STD-1331 (NOTICE 2), MILITARY STANDARD, PARAMETERS TO BE CONTROLLED FOR THE SPECIFICATION OF MICROCIRCUITS (30 OCT 1995) [S/S BY MIL-HDBK-1331]., MIL-STD-1331, dated 10 JAN 1969, is hereby canceled. Future acquisitions should refer to MIL-HDBK-1331, Parameters To Be Controlled For The Specification Of Microcircuits.

MIL-STD-1331, MILITARY STANDARD, PARAMETERS TO BE CONTROLLED FOR THE SPECIFICATION OF MICROCIRCUITS (10 JAN 1969). This standard describes the parameters required as a minimum for the specification of microcircuits.

MIL-STD-1332B (NOTICE 1), MILITARY STANDARD, DEFINITIONS OF TACTICAL, PRIME, PRECISE, AND UTILITY TERMINOLOGIES FOR CLASSIFICATION OF THE DOD MOBILE ELECTRIC POWER ENGINE GENERATOR SET FAMILY (29 JUN 1998)., MIL-STD-1332B, dated 13 MAR 1973, and any subsequent revisions or change notices are inactive for new design.

MIL-STD-1332B (NOTICE 2), MILITARY STANDARD, DEFINITIONS OF TACTICAL, PRIME, PRECISE, AND UTILITY TERMINOLOGIES FOR CLASSIFICATION OF THE DOD MOBILE ELECTRIC POWER ENGINE GENERATOR SET FAMILY (10 JUL 2001)., MIL-STD-1332B, dated 13 MAR 1973, is hereby reactivated and may be used for either new or existing design acquisitions.

MIL-STD-1332B, MILITARY STANDARD, DEFINITIONS OF TACTICAL, PRIME, PRECISE, AND UTILITY TERMINOLOGIES FOR CLASSIFICATION OF THE DOD MOBILE ELECTRIC POWER ENGINE GENERATOR SET FAMILY (13 MAR 1973)., This standard provides definitions for the classification of engine generator sets comprising the DOD Standard Family by Type, according to their application, weight, mobility, reliability, and life; by Class, according to their electrical performance characteristics; and by Mode, according to the frequency of the power generated. The table of electrical performance characteristics is annotated to reference the test method within MIL-STD-705 used to determine the value of the parameters listed. Separate tables are provided giving the voltage connections and reconnections available in each of the generator sets of the DOD Standard Family and the derating of the sets with temperature and altitud

MIL-STD-1333B (NOTICE 1), MILITARY STANDARD, AIRCREW STATION GEOMETRY FOR MILITARY AIRCRAFT (18 MAY 1996)., MIL-STD-1333B, dated 9 JAN 1987, is hereby canceled w/o replacement.

MIL-STD-1333B, MILITARY STANDARD, AIRCREW STATION GEOMETRY FOR MILITARY AIRCRAFT (9 JAN 1987)., The requirements defined herein apply to all piloted aircraft acquired by the Military Services.

MIL-STD-1334B (NOTICE 1), MILITARY STANDARD, PROCESS FOR BARRIER COATING OF ANTI-FRICTION BEARINGS (9 SEPT 1985)., Following pages of MIL-STD-1334B have been revised and supersede the pages listed...

MIL-STD-1334B (NOTICE 2), MILITARY STANDARD, PROCESS FOR BARRIER COATING OF ANTI-FRICTION BEARINGS (2 OCT 1991)., MIL-STD-1334B, dated 4 jan 1977, has been reviewed and determined to be valid for use in acquisition

MIL-STD-1334B (NOTICE 3), MILITARY STANDARD, PROCESS FOR BARRIER COATING OF ANTI-FRICTION BEARINGS (2 AUG 1999) [S/S BY SAE-AS13341]., MIL-STD-1334B1, dated 4 JAN 1977, is hereby canceled. Future acquisition should refer to SAE-AS13341, "Process for Barrier Coating of Anti-Friction Bearings"

MIL-STD-1334B, MILITARY STANDARD, PROCESS FOR BARRIER COATING OF ANTI-FRICTION BEARINGS (4 JAN 1977)., This standard specifies the basic requirements for the application of barrier coatings to anti-friction bearings for the purpose of preventing lubricant loss by surface migration and spreading during storage and in service.

MIL-STD-1337B (NOTICE 1), MILITARY STANDARD, GENERAL SUPPRESSION SYSTEM DESIGN REQUIREMENTS FOR PORTABLE ELECTRIC HAND TOOLS (18 OCT 1989)., MIL-STD-1337B(SHIPS) dated 8 APR 1971, is hereby canceled. Future acquisitions should refer to MIL-STD-461, Electromagnetic Emission and susceptibility Requirements for the Control of Electromagnetic Interference and MIL-STD-462, Electro magnetic Interference Characteristics, Measurement of.

MIL-STD-1337B, MILITARY STANDARD, GENERAL SUPPRESSION SYSTEM DESIGN REQUIREMENTS FOR PORTABLE ELECTRIC HAND TOOLS (8 APR 1971)., This standard covers electromagnetic interference design requirements for portable electric hand tools (metal or insulated encasements or a combination thereof) having functional or double-insulation.

MIL-STD-1339C, DEPARTMENT OF DEFENSE STANDARD PRACTICE FITTING OUT PROCEDURES-SHIPS. The purpose of this military standard is to standardize contractor related fitting out procedures and co definitize contractor fitting out responsibilities.

MIL-STD-1343 (NOTICE 1), MILITARY STANDARD GLOSSARY OF TERMS FOR ELECTRONIC AND WEAPONS CONTROL INTERFACE FUNCTIONS (NAVAL SHIP COMBAT SYSTEMS) (5 DEC 1995) (NO S/S DOCUMENT)., MIL-STD-1343 dated 1 July 1969, is hereby canceled without replacement.

MIL-STD-1343, MILITARY STANDARD GLOSSARY OF TERMS FOR ELECTRONIC AND WEAPONS CONTROL INTERFACE FUNCTIONS (NAVAL SHIP COMBAT SYSTEMS) (1 JUL 1969) (NO S/S DOCUMENT)., This standard contains standard terms for the interface functions which may be designed to flow through the interfaces of naval ship combat systems except for the Fleet Ballistic Missile (FBM) system

MIL-STD-1344A (NOTICE 1), MILITARY STANDARD TEST METHODS FOR ELECTRICAL CONNECTORS (S/S BY EIA364, SEE NOTICE FOR INDIVIDUAL TEST METHOD REPLACEMENT).

MIL-STD-1344A (NOTICE 2), MILITARY STANDARD TEST METHODS FOR ELECTRICAL CONNECTORS - 14 AUG 1981. To all holders of MIL-STD-1344A, the following pages of MIL-STD-1344A, Method 3008, have been revised and supersede the pages listed.

MIL-STD-1344A (NOTICE 3), MILITARY STANDARD TEST METHODS FOR ELECTRICAL CONNECTORS - 4 APR 1983. To all holders of MIL-STD-1344A, the following methods are to be added.

MIL-STD-1344A (NOTICE 4), MILITARY STANDARD TEST METHODS FOR ELECTRICAL CONNECTORS - 14 JUN 1985. To all holders of MIL-STD-1344A, the following pages have been revised and supersede the pages listed.

MIL-STD-1344A (NOTICE 5), MILITARY STANDARD TEST METHODS FOR ELECTRICAL CONNECTORS - 15 SEP 1993. To all holders of MIL-STD-1344A, the following pages have been revised and supersede the pages listed.

MIL-STD-1344A, MILITARY STANDARD TEST METHODS FOR ELECTRICAL CONNECTORS (1 SEP 1977) (S/S BY EIA364, SEE NOTICE FOR INDIVIDUAL TEST METHOD REPLACEMENT)., This standard establishes uniform test methods for testing electrical connectors.

MIL-STD-1345B (NOTICE 1), MILITARY STANDARD TEST REQUIREMENTS DOCUMENT, PREPARATION OF (8 JUL 1988).

MIL-STD-1345B (NOTICE 2), MILITARY STANDARD TEST REQUIREMENTS DOCUMENT, PREPARATION OF (15 MAR 1995).

MIL-STD-1345B, MILITARY STANDARD TEST REQUIREMENTS DOCUMENT, PREPARATION OF (10 FEB 1981)., This standard establishes the requirements for the preparation and acceptance of a Test Requirements Document (TRD) necessary for the specification, implementation, and maintenance of testing requirements for a system, subsystem, assembly, subassembly or Special Purpose Electronic Test Equipment (SPETE) herein referred to as the Unit Under Test (UUT).

MIL-STD-1347A (NOTICE 1), MILITARY STANDARD FOR NAVIGATION DISPLAY MULTICOLOR MICROCHART/MAP TRANSPARENCIES - 22 June 1973. To all holders of MIL-STD-1347A, the following pages of MIL-STD-1347A have been revised and supersede the pages listed.

MIL-STD-1347A (NOTICE 2), MILITARY STANDARD FOR NAVIGATION DISPLAY MULTICOLOR MICROCHART/MAP TRANSPARENCIES - 22 APRIL 1988. To all holders of MIL-STD-1347A, the following pages of MIL-STD-1347A have been revised and supersede the pages listed.

MIL-STD-1347A (NOTICE 3), MILITARY STANDARD NAVIGATION, DISPLAY MULTICOLOR MICROCHART/MAP TRANSPARENCIES - 2 OCT 1991. MIL?STD?1347A, dated 1 September 1971, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1347A (NOTICE 4), MILITARY STANDARD NAVIGATION, DISPLAY MULTICOLOR MICROCHART/MAP TRANSPARENCIES - 30 AUG 1999. MIL-STD-1347A, dated 1 September 1971, is hereby canceled. Future acquisition for this item should refer to Department of Defense adopted SAE-AS13471, ?Navigation, Display Multicolor Microchart/Map Transparencies.?

MIL-STD-1347A, MILITARY STANDARD FOR NAVIGATION DISPLAY MULTICOLOR MICROCHART/MAP TRANSPARENCIES. This standard covers the general requirement for the preparation and production of multicolor microchart/map transparencies for use with optical projection viewing devices. It defines the physical and photographic characteristics of the output transparencies. These transparencies shall exhibit sufficient fidelity so that when projected back to the original size, the projected image shall be an acceptable facsimile of the original chart.

MIL-STD-1348 (NOTICE 1), MILITARY STANDARD KNOBS, CONTROL, SELECTION OF (5 DEC 1995). MIL-STD-1348, dated 30 July 1969, is hereby canceled without replacement.

MIL-STD-1348, MILITARY STANDARD KNOBS, CONTROL, SELECTION OF (30 JUL 1969)., This standard provides selected control knobs for use in the design of military equipment.

MIL-STD-1352F (NOTICE 1), MILITARY STANDARD ATTENUATORS, FIXED AND VARIABLE, SELECTION OF (JUNE 1 1999). MIL-STD-1352F, dated 24 April 1985, is hereby canceled without replacement.

MIL-STD-1352F, MILITARY STANDARD ATTENUATORS, FIXED AND VARIABLE, SELECTION OF. This standard provides a list of standard fixed and variable attenuators for use in military applications.

MIL-STD-1353 (NOTICE 5), MILITARY STANDARD ELECTRICAL, CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF (10 SEP 1999)., MIL-STD-1353, dated 2 July 1980, is hereby canceled without replacement.

MIL-STD-1353B (NOTICE 1) MILITARY STANDARD ELECTRONICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF. This standard establishes requirements for selection of electrical connectors, plug-in sockets, and their associated hardware, shown in detail in sections 100, 200, 300, and 400, for use in military equipment.

MIL-STD-1353B (NOTICE 2), MILITARY STANDARD ELECTRONIC CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF (7 AUG 1984).

MIL-STD-1353B (NOTICE 3), MILITARY STANDARD ELECTRONIC CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF (20 FEB 1986).

MIL-STD-1353B (NOTICE 4), MILITARY STANDARD ELECTRONIC CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF (12 MAY 1989).

MIL-STD-1353B (NOTICE 5), MILITARY STANDARD ELECTRONIC CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF (10 SEP 1999)., MIL-STD-1353, dated 2 July 1980, is hereby canceled without replacement.

MIL-STD-1353B, MILITARY STANDARD ELECTRONIC CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF (2 JUL 1980). This standard establishes requirements for selection of electrical connectors, plug-in sockets, and their associated hardware, shown in detail in sections 100, 200, 300, and 400, for use in military equipment.

MIL-STD-1358 (NOTICE 1), MILITARY STANDARD WAVEGUIDES, RECTANGULAR, RIDGE AND CIRCULAR, SELECTION OF (11 JUN 1999). MIL-STD-1358B, dated 6 March 1978, is hereby canceled without replacement.

MIL-STD-1358B (NOTICE 1), MILITARY STANDARD WAVEGUIDES, RECTANGULAR, RIDGE AND CIRCULAR, SELECTION OF (11 JUN 1999). MIL-STD-1358B, dated 6 March 1978, is hereby canceled without replacement.

MIL-STD-1358B, MILITARY STANDARD WAVEGUIDES, RECTANGULAR, RIDGE AND CIRCULAR, SELECTION OF. This standard provides standard sizes of rigid rectangular, rigid circular, single-ridge, and double ridge waveguides considered by the Department of Defense as standard for use in military equipment and applications.

MIL-STD-1359B (NOTICE 1) MILITARY STANDARD CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT (20 SEP 1999).

MIL-STD-1359B (NOTICE 2), MILITARY STANDARD CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT (08 DEC 2003). MIL-STD-1359B, dated 24 June 1987, and Notice 1, dated 20 September 1999, are hereby canceled and replaced with SAE-ARP1176, ?Oxygen System and Component Cleaning and Packaging.?

MIL-STD-1359B, MILITARY STANDARD CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT. The purpose of this document is to provide minimum requirements for cleaning aircraft breathing oxygen systems and components, inspection methods and packaging after cleaning, and guidelines for oxygen equipment cleanign areas.

MIL-STD-1360A (NOTICE 2), MILITARY STANDARD FUSES, FUSEHOLDERS, AND ASSOCIATED HARDWARE, SELECTION AND USE OF (17 April 1996). MIL-STD-1360A, dated 26 September 1979, is hereby canceled. For future selection of fuses, fuseholders, and associated hardware refer to Aerospace Recommended Practice ARP-1199, "Selection, Application, and Inspection of Electric Overcurrent Protective Devices".

MIL-STD-1360A, SECTION 200 FUSEHOLDERS.

MIL-STD-1362A (NOTICE 1), PROCEDURES FOR STEAM PURITY MEASUREMENT NAVAL PROPULSION BOILERS (16 APR 1992). MIL-STD-1362 (SH), dated 06 July 1987, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1362A, DEPARTMENT OF DEFENSE TEST METHOD PROCEDURES FOR STEAM PURITY MEASUREMENT NAVAL PROPULSION BOILERS. This standard covers the procedure for the determination of steam purity in Naval propulsion boilers.

MIL-STD-1364J, MILITARY STANDARD GENERAL PURPOSE ELECTRONIC TEST EQUIPMENT. MIL-STD-1364J(NAVY), dated 7 October 1991, is hereby canceled. Future acquisition should refer to NAVSEA Publication, STOOO-AA-IDX-O1O-PEETE.

MIL-STD-1364J, MILITARY STANDARD GENERAL PURPOSE ELECTRONIC TEST EQUIPMENT. This document identifies standard General Purpose Electronic Test Equipment (GPETE), GPETE support items (GSI), and General Use Portable Electrical Equipment (GUPEE) which have been determined to be suitable for Navy use and for which the NAVSEA exercises material support responsibility by management of item entity.

MIL-STD-1365A (NOTICE 1), MILITARY STANDARD GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS (30 SEP 1988).

MIL-STD-1365A,MILITARY STANDARD GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS (20 JUL 1981)., This standard contains general design criteria and applicable tests for beams, bands, strongbacks, cradles, assembly stands, slings, dollies, bomb loaders, trailers, and hoists associated with handling of weapons and related items.

MIL-STD-1365B, MILITARY STANDARD, GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS (30 SEP 1997)., This standard contains general design criteria and applicable tests for beams, bands, strongbacks, cradles, assembly stands, slings, dollies, bomb loaders, trailers, and hoists associated with handling of weapons and related items.

MIL-STD-1366C, MILITARY STANDARD TRANSPORTABILITY CRITERIA. In accordance with the DOD Engineering for Transportability Program, this standard establishes basic transportability criteria for use in the development and shipment of items of material. This standard covers dimensional and weight limitations for all modes of transport. It also covers slinging and tiedown provisions, containerization criteria, overloads, assembly/disassembly, air delivery, shelter criteria, and transportability testing. This standard will allow material development and procurement activities to design military equipment to meet the transportability requirements of various modes.

MIL-STD-1366D (NOTICE 1) DEPARTMENT OF DEFENSE INTERFACE STANDARD TRANSPORTABILITY CRITERIA (31 MAR 2003)., TO ALL HOLDERS OF MIL-STD-1366D: 1. THE FOLLOWING PAGES OF MIL-STD-1366D HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-1366D, DEPARTMENT OF DEFENSE INTERFACE STANDARD FOR TRANSPORTABILITY CRITERIA (18 DEC 1998). In accordance with the DOD Engineering for Transportability program, this standard establishes basic transportability criteria for the use in development and shipment of items of materiel. The standard covers dimensional and weight limitations for all modes of transport to ensure that new and modified systems meet the interface requirements of the Defense Transportation System (DTS) (highways, tunnels, bridges, railways, etc.) and the DTS assets (rotary and fixed wing aircraft, railcars, ships, barges, etc.) for unrestricted worldwide transport and deployment. It also covers lifting and tiedown provisions, containerization criteria, overloads, assembly/disassembly, air delivery, shelter criteria, transportability testing and modeling and simulation of the transportation environment. This standard will allow materiel development and procurement activities to design military equipment to meet the transportability requirements of various modes.

MIL-STD-1366E, INTERFACE STANDARD FOR TRANSPORTABILITY CRITERIA (31 OCT 2006), Standard establishes basic transportability interface criteria for use in the development and shipment of items of materiel. The standard covers dimensional and weight limitations for all modes of transport to ensure that new and modified systems meet the interface requirements of the Defense Transportation System (DTS) (highways, tunnels, bridges, railways, etc.) and the DTS lift assets (rotary and fixed wing aircraft, railcars, ships, barges, etc.) for unrestricted worldwide transport and deployment. It also covers lifting and tiedown provisions, containerization criteria, overloads, assembly/disassembly, air delivery, shelter criteria, transportability testing, and modeling and simulation of the transportation environment.

MIL-STD-1367, MILITARY STANDARD PACKAGING , HANDLING, STORAGE, AND TRANSPORTABILITY PROGRAM REQUIREMENTS FOR SYSTEMS AND EQUIPMENTS. This standard establishes uniform management requirements for a packaging, handling, storage, and transportability (PHST) program. The use of the term transportability program herein refers to those aspects of transportability relative to packaging, handling, and storage and in no way obviates the Department of Defense engineering for transportability program

MIL-STD-1367A (NOTICE 1), MILITARY STANDARD PACKAGING , HANDLING, STORAGE, AND TRANSPORTABILITY PROGRAM REQUIREMENTS FOR SYSTEMS AND EQUIPMENTS (31 MAY 1995). MIL-STD-1367A, dated 2 October 1989, is hereby canceled without replacement.

MIL-STD-1367A, MILITARY STANDARD PACKAGING, HANDLING, STORAGE AND TRANSPORTABILITY PROGRAM REQUIREMENTS FOR SYSTEMS AND EQUIPMENTS. This standard establishes uniform packaging, handling, storage, and transportability (PHS&T) program management procedures.

MIL-STD-1369, MILITARY STANDARD, INTEGRATED LOGISTIC SUPPORT PROGRAM REQUIREMENTS (31 MAR 1971)., This document establishes the requirements, procedures and formats to be used for the development and documentation of an Integrated Logistic Support (ILS) Program (ILSP).

MIL-STD-1372A (NOTICE 1), MILITARY STANDARD PROCESS FOR SOLDERING ACCIDENT DOSIMETER TO FILM BADGE HOLDER FOR RADIAC DETECTING ELEMENT (JANUARY 18 1973). To all holders of MIL-STD-1372A. The following pages of MIL-STD-1372A have been revised and supersede the pages listed.

MIL-STD-1372A, MILITARY STANDARD PROCESS FOR SOLDERING ACCIDENT DOSIMETER TO FILM BADGE HOLDER FOR RADIAC DETECTING ELEMENT. This standard establishes the process for soldering the Accident Dosimeter to the Film Badge Type Holder.

MIL-STD-1373 (NOTICE 1), MILITARY STANDARD SCREW-THRED, MODIFIED, 60?, STUB, DOUBLE (NOVEMBER 3 1971). To all holders of MTL-STD-1373.1. The following page(s) of MIL-STD-1373 have been revised and supersedes the page(s) listed:

MIL-STD-1373 (NOTICE 2), MILITARY STANDARD SCREW-THRED, MODIFIED, 60?, STUB, DOUBLE (NOVEMBER 27 1972). To all holders of MIL-STD-1373, retain this notice and insert before table of contents.

MIL-STD-1373 (NOTICE 6), MILITARY STANDARD SCREW-THREAD, MODIFIED, 60 DEG. STUB, DOUBLE (9 MAY 2002). MIL-STD-1373, dated 8 April 1971, is hereby reinstated and may be used for acquisition.

MIL-STD-1373, MILITARY STANDARD SCREW-THREAD, MODIFIED, 60 DEGREE STUB, DOUBLE (8 APR 1971)., This standard covers the requirements for the double stub, sixty degree modified screw-thread series, classes and sizes for quick disconnect use.

MIL-STD-1374A (NOTICE 1), MILITARY STANDARD WEIGHT AND BALANCE DATA REPORTING FORMS FOR AIRCRAFT (INCLUDING ROTORCRAFT) (2 OCT 1991).

MIL-STD-1374A (NOTICE 2), MILITARY STANDARD WEIGHT AND BALANCE DATA REPORTING FORMS FOR AIRCRAFT (INCLUDING ROTORCRAFT) (30 JUN 1997).

MIL-STD-1374A (NOTICE 3), MILITARY STANDARD WEIGHT AND BALANCE DATA REPORTING FORMS FOR AIRCRAFT (INCLUDING ROTORCRAFT) (18 JUL 2005)., MIL-STD-1374A, dated 30 September 1977, is hereby canceled. Future acquisition for this item should refer to SAWE-RP8, “Weight and Balance Data Reporting Forms for Aircraft (including Rotorcraft).”

MIL-STD-1374A, MILITARY STANDARD WEIGHT AND BALANCE DATA REPORTING FORMS FOR AIRCRAFT (INCLUDING ROTORCRAFT). This document covers standard weight statements and forms Parts I, II, and III hereof, for procurement of weight and balance data for aircraft (including rotorcraft), states the principles followed in the formulation of these standards, furnishes instructions where necessary for uniform compilation of the required weight and descriptive data, and provides a glossary of terms for which definitions may not be self-evident on the weight statements and forms.

MIL-STD-1376B, MILITARY STANDARD PIEZOELECTRIC CERAMIC MATERIAL AND MEASUREMENTS GUIDELINES FOR SONAR TRANSDUCERS. This standard describes six types of piezoelectric ceramic materials utilized co manufactures sonar transducers for the Naval service. This standard also describes the properties of the ceramic compositions for these six types as measured on standard test specimens.

MIL-STD-1377 (NAVY), DOD TEST METHOD STANDARD EFFECTIVENESS OF CABLE, CONNECTOR, AND WEAPON ENCLOSURE SHIELDING AND FILTERS IN PRECLUDING HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE, MEASUREMENT OF. This standard is intended to provide a weapon developer or designer with shielding and filter effectiveness test methods for determining whether the particular weapon design requirements of MIL-P-24014 have been properly implemented.

MIL-STD-1378E, MILITARY STANDARD REQUIREMENTS FOR EMPLOYING STANDARD ELECTRONIC MODULES. This standard establishes the requirements for the implementation of Standard Electronic Modules (SEM) in the design and construction of the selected military electronic systems.

MIL-STD-1385B (NAVY) (NOTICE 1), MILITARY STANDARD PRECLUSION OF ORDNANCE HAZARDS IN ELECTROMAGNETIC FIELDS; GENERAL REQUIREMENTS FOR. MIL-STD-1385B(NAVY), dated 1 August 1986, is hereby canceled. Information regarding ordnance hazards in electromagnetic fields is now contained in MIL-STD-464, “Department of Defense Interface Standard for Electromagnetic Environmental Effects Requirements for Systems.”

MIL-STD-1385B (NAVY), MILITARY STANDARD PRECLUSION OF ORDNANCE HAZARDS IN ELECTROMAGNETIC FIELDS; GENERAL REQUIREMENTS FOR. This standard establishes the general requirements to preclude hazards resulting from ordinance having electroexplosive devices (EED's) exposed to electromagnetic fields

MIL-STD-1386-11 (NAVY), MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILITARY CONTAINERS.

MIL-STD-1386-13, MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILITARY CONTAINERS.

MIL-STD-1386-14 (NAVY), MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS.

MIL-STD-1386-17 MILITARY STANDARD HAZAROUS MATERIALS AND ASSOCIATED MILVAN CONTAINERS. This document gives detailed instructions for loading the milvan container with fleet issue unit loads of bomb fin assemblies for 1300 lb mk 83 bombs in bomb crate. The unit load shall be in accordance with vr 54/49

MIL-STD-1386-20, MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS.

MIL-STD-1386-21A, MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS.

MIL-STD-1386-22, MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS.

MIL-STD-1386-24, MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS.

MIL-STD-1386-30, LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS.

MIL-STD-1386-33, MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS

MIL-STD-1386-34, MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS

MIL-STD-1386-36, MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS

MIL-STD-1386/17 (NOTICE 1) MILITARY STANDARD LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILITARY CONTAINERS FOR ASSEMBLY, BOMB FOR 1000 LB MK 83 BOMB IN CRATE MK 10 AND MODS FLEET ISSUE UNIT LOAD. MIL-STD-1386/17, dated 29 October 1972, has been reviewed and determined to be valid for acquisition.

MIL-STD-1388-1A, MILITARY STANDARD, LOGISTICS SUPPORT ANALYSIS (11 APR 1983) (S/S BY MIL-HDBK-502)., This standard provides general requirements and task descriptions governing performance of Logistic Support Analysis (LSA) during the life cycle of systems and equipment.

MIL-STD-1388-2B (NOTICE 1), DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD (21 JAN 1993) (S/S BY MIL-PRF-49506)., THE FOLLOWING PAGES OF MIL-STD-1388-2B HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-1388-2B, MILITARY STANDARD DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD (28 MAR 1991) (S/S BY MIL-PRF-49506)., This standard prescribes the data element definitions (DED), data field lengths, and formats for Logistic Support Analysis (LSA) Record (LSAR) data. It identifies the LSAR reports that are generated from the LSAR data and identifies the LSAR relational tables and automated data processing (ADF) specifications for transmittal and delivery of automated LSAR data.

MIL-STD-1389D (NOTICE 1), MILITARY STANDARD, DESIGN REQUIREMENTS FOR STANDARD ELECTRONIC MODULES (22 APR 1998)., MIL-STD-1389D, dated 30 March 1989, is inactive for new design and is no longer used, except for replacement purposes.

MIL-STD-1389D, MILITARY STANDARD, DESIGN REQUIREMENTS FOR STANDARD ELECTRONIC MODULES (30 MAR 1989)., This standard establishes the design requirements for Standard Electronic Modules (SEM) for the Standard Hardware Acquisition and Reliability Program (SHARP) for use in military systems. Other requirements for new module development are specified in MIL-M-28787 for the appropriate class selected to meet the systems/environmental requirements.

MIL-STD-1390D (NOTICE 1), LEVEL OF REPAIR ANALYSIS (19 JAN 1993) [S/S BY MIL-PRF-495060]., Mil-STD-1390D, dated 19 January 1993, is hereby canceled and superseded by Mil-PRF-49506.

MIL-STD-1390D MILITARY STANDARD, LEVEL OF REPAIR ANALYSIS (19 JAN 1993) [S/S BY MIL-PRF-495060]., This standard establishes general requirements and specific tasks for performance of Level of Repair Analysis (LORA) during the life cycle of systems or equipment.

MIL-STD-1391D, MILITARY STANDARD, PROVISIONS FOR EVALUATING QUALITY OF OVERCOATS, MEN'S (2 JUN 1992)., The purpose of this standard is to provide standardized provisions for evaluating the quality of overcoats.

MIL-STD-1393B, MILITARY STANDARD, PROVISIONS FOR EVALUATING QUALITY OF COATED FABRIC RAINCOATS (20 JAN 1982)., The purpose of this standard is to provide standardized provisions for evaluating quality of coated fabric raincoats.

MIL-STD-1394B, MILITARY STANDARD, PROVISIONS FOR EVALUATING THE QUALITY OF CAP CROWNS (6 NOV 1989)., The purpose of this standard is to provide a standardized provisions of evaluating the quality of cap crowns.

MIL-STD-1395B, MILITARY STANDARD, FILTERS AND NETWORKS SELECTION AND USE OF (6 MAR 1987)., This standard consists of the following: a. Selected standard filter and network styles and types, detailed by sections, chosen jointly by the Department of the Army, the Navy and the Air Force for use in new design and manufacture of military equipment under the jurisdiction of the Departments. b. Guides for the choice and use of filters and networks for new military equipment.

MIL-STD-1397C (NOTICE 1), MILITARY STANDARD INPUT/OUTPUT INTERFACES, STANDARD DIGITAL DATA, NAVY SYSTEMS. MIL-STD-1397C, dated 1 June 1995, is inactive for new design and is no longer used, except for replacement purposes.

MIL-STD-1397C (SH), MILITARY STANDARD INPUT/OUTPUT INTERFACES, STANDARD DIGITAL DATA, NAVY SYSTEMS. This standard establishes the requirements for the physical, functional, and electrical characteristics of a standard I/O interface for digital data.

MIL-STD-1399-102A, MILITARY STANDARD,INTERFACE STANDARD FOR SHIPBOARD SYSTEMS, SECTION 102, LOW PRESSURE DRY AIR SERVICE FOR SURFACE SHIPS (5 FEB 1988)., The purpose of this section is to define the standard interface requirements that are a constraint upon the design of shipboard electronic equipment which will utilize ships low pressure dry air support systems.

MIL-STD-1399-105 (NOTICE 1), MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SECTION 105 SEA WATER SERVICE FOR SURFACE SHIPS (6 JUL 1987). MIL-STD-1399 (NAVY), Section 105, dated 31 July 1974 has been reviewed and determined to be valid for use in acquisition.

MIL-STD-1399-106B (NAVY), MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 106 COMPRESSED AIR SERVICE FOR SURFACE SHIPS. This section defines the standard interface requirements for, and the constraints on, the design of shipboard systems and equipment which will utilize compressed air service.

MIL-STD-1399-300A (NAVY), MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 300A ELECTRIC POWER, ALTERNATING CURRENT (13 OCT 1987)., This section establishes electrical interface characteristics for shipboard equipment utilizing ac electric power to ensure compatibility between user equipment and the electric power system. Characteristics of the electric power system are defined and tolerances are established. User equipment shall operate from a power system having these characteristics and shall be designed within these constraints in order to reduce adverse effects of the user equipment on the electric power system. Test methods are included for verification of compatibility.

MIL-STD-1399-302A, MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 302 WEATHER ENVIRONMENT (29 FEB 1988)., This section establishes interface requirements for shipboard systems/equipment which are exposed to or affected by the weather to ensure compatibility between such systems/equipment and the weather environment.

MIL-STD-1399-390 (NAVY), MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 390 ELECTRIC POWER, DIRECT CURRENT, (OTHER THAN SHIP’S BATTERY) FOR SUBMARINES (METRIC). This standard defines the electrical interface requirements for, and the constraints on, the design of submarine systems/equipments which will utilize direct current (dc) electric power. This standard does not apply to, nor shall be used for, the design of ship service dc power system load connected to the main storage battery. Submarine equipment designers and users of the system must comply with these interface and systems constraints/requirements when developing, producing and acquiring equipments to assure that satisfactory equipment operation and performance are obtained.

MIL-STD-1399-534 (NOTICE 1) MILITARY STANDARD FOR SHIPBOARD SYSTEMS SECTION 534

MIL-STD-1399-534, MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 534 AUXILIARY STEAM SERVICE, SURFACE SHIPS. This section establishes interface requirements for shipboard systems/equipment utilizing auxiliary steam services to ensure compatibility between such systems/equipment and the auxiliary steam system.

MIL-STD-1399-593-1, MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 593 - PART 1 SEWAGE/WASTE WATER DISPOSAL FOR SURFACE SHIPS. This section establishes interface requirements for the standard connector used on surface ships for the discharge of sewage/waste water to a receiving facility to ensure compatibility at the interface.

MIL-STD-1399-593-2, MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEM SECTION 593 - PART 2 SEWAGE/WASTE WATER DISPOSAL FOR SUBMARINES. This section establishes interface requirements for the standard connectors used on submarines for sanitary tank discharge to a receiving facility to ensure compatibility at the interface.

MIL-STD-1399-702, MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 702 SYNCHRO DATA TRANSMISSION. This section is an integral part of MIL-STD-1399. When the interfade between a ship synchro data transmitter and the user system/equipment is under consideration, this section and the standard must be viewed as a single document. The policies and procedures established by MIL-STD-1399 are mandatory.

MIL-STD-1399-72-1A, MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 072.1 BLAST ENVIRONMENT, MISSILE EXHAUST. Policies and procedures established by MIL-STD-1399 are mandatory. (This section defines the standard interface requirements for the design of systems, equipment, and structure which may be subjected to the blast generated by missile launches.) This section and the basic standard are to be viewed as a integral single document.

MIL-STD-1399-72-2A, MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 072.2 BLAST ENVIRONMENT, GUN MUZZLE. This section addresses the interface characteristics of gun blast effects for ship guns ranging from 78 millimeter (mm), 3 inch/50 to 16 inch/50, and the characteristics of Hi-Frag ammunition versus standard ammunition. Small caliber guns, such as Close-in-Weapon System (CIWS) are excluded since they produce insignificant blast effects, and may generally be ignored for ship and equipment design purposes.

MIL-STD-1399/106B (NOTICE 1), MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 106 COMPRESSED AIR SERVICE FOR SURFACE SHIPS. MIL-STD-1399/106B, dated 5 February 1988, is hereby canceled without replacement.

MIL-STD-1399B, MILITARY STANDARD, INTERFACE STANDARD FOR SHIPBOARD SYSTEMS (22 NOV 1977)., This standard establishes interface requirements for shipboard equipment to ensure compatibility between such equipment and the shipboard environment in which they will be installed.

MIL-STD-1399C, MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS (2 FEB 1988)., This standard establishes interface requirements for shipboard equipment to ensure compatibility between such equipment and the shipboard environment in which they will be installed.

MIL-STD-1399_300a MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 300A ELECTRIC POWER, ALTERNATING CURRENT. The policies and procedures established by MIL-STD-1399 are mandatory. Section 300A and the basic standard are to be viewed as an integral single document for use in the design and testing of electric power systems and user equipment