MIL-STD-3003B, DEPARTMENT OF DEFENSE STANDARD PRACTICE VEHICLES, WHEELED: PREPARATION FOR SHIPMENT AND STORAGE OF (24 SEP 2007)., This standard covers practices to protect wheeled vehicles against environmentally induced corrosion and deterioration and other forms of degradation during storage and shipment associated with the military distribution system. This document also provides the standard practices/processes for the military preservation, packaging, packing, and marking of Basic Issue Items (BII), Components-Of-The-End-Item (COEI), and On-Vehicle Equipment (OVE) shipped with automobiles, trucks, truck-tractors, trailers, trailer-dollies, and other wheeled vehicles. The model specific instructions will be documented on Equipment Preservation Data Sheets (EPDS). These EPDS will be used for vehicle shipment and storage in support of Storage and Maintenance of Army Prepositioned Stock Materiel and the Defense Transportation System, and will be reviewed and modified to accommodate the specific storage environment, storage period, and the amount of care of supplies in storage.

MIL-STD-3004B (W/CHANGE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE, QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS (14 NOV 2008)., This Standard provides DOD Policy, general instructions and minimum procedures to be used by the Military Services and the Defense Logistics Agency in performing quality assurance/surveillance functions of U. S. Government-owned fuels, lubricants, and related products worldwide at all locations except product procurement facilities which are covered by requirements contained in the contract. Requirements for procurement needs may be derived from this document as necessary. This Standard includes policy and responsibilities derived from Executive Agency (see 1.3 below) documents. The information contained herein is appropriate to quality assurance, where applicable (e.g.: direct delivery to customers, destination acceptance, etc.). This Standard also contains intra-Governmental receipt limits.

MIL-STD-3006, DEPARTMENT OF DEFENSE STANDARD PRACTICE SANITATION REQUIREMENTS FOR FOOD ESTABLISHMENTS (20 AUG 2000)., This standard establishes sanitation requirements for establishments which produce, process, or store various types of food products before or after final acceptance by an element of the Department of Defense.

MIL-STD-3006A, DEPARTMENT OF DEFENSE STANDARD PRACTICE SANITATION REQUIREMENTS FOR FOOD ESTABLISHMENTS (7 JUN 2002)., This standard establishes sanitation requirements for establishments which produce, process, or store various types of food products before or after final acceptance by an element of the Department of Defense.

MIL-STD-3006B (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE SANITATION REQUIREMENTS FOR FOOD ESTABLISHMENTS (22 FEB 2008). MIL-STD-3006B, dated 01 January 2008, was removed from ASSIST because final approval by the Office of the Surgeon General was pending before its issuance. Upon final approval by the Surgeon General; and the issuance of implementation policy, the standard will be released as MIL-STD-3006C. Until then, MIL-STD-3006A continues to be in effect.

MIL-STD-3007F, STANDARD PRACTICE FOR UNIFIED FACILITIES CRITERIA AND UNIFIED FACILITIES GUIDE SPECIFICATIONS (13 DEC 2007)., This standard establishes procedures for the development and maintenance of Unified Facilities Criteria (UFC) and Unified Facilities Guide Specifications (UFGS) and prescribes their use by the Army, Navy, Marine Corps, Air Force, Department of Defense (DoD) defense agencies, and DoD field activities. All DoD components are adopting the concept and practice of sustainable design and development and the use of project rating and scoring systems such as Leadership in Environmental and Energy Design (LEED). These and other concepts should encourage innovation and alternatives to the traditional planning, design, construction, and maintenance process. The UFC/UFGS criteria program will implement the concepts of sustainable design and development and continuous innovation into the facilities acquisition and maintenance processes.

MIL-STD-3008, DEPARTMENT OF DEFENSE STANDARD PRACTICE INTERACTIVE ELECTRONIC TECHNICAL MANUAL (IETM) TECHNICAL DATA REQUIREMENTS TO SUPPORT THE GLOBAL COMBAT SUPPORT SYSTEM - ARMY (GCSS-A) (30 SEP 2000)., This standard provides detailed requirements for collecting and reporting operations, historical, maintenance, and ammunition data for the management and support of aviation and non-aviation weapons systems and their related systems, equipment, components/modules, including flight and mission safety parts. The data developed in accordance with this standard will be provided to the Global Combat Support System - Army (GCSS-A). The GCSS-A provides the Army a seamless, integrated, and interactive communications and automated information system (AIS) at all force levels of combat service support (CSS).

MIL-STD-3009, DEPARTMENT OF DEFENSE INTERFACE STANDARD LIGHTING, AIRCRAFT, NIGHT VISION IMAGING SYSTEM (NVIS) COMPATIBLE (2 FEB 2001) [SUPERSEDING MIL-L-85762A]., This standard establishes requirements for the emission characteristics of aircraft lighting and display equipment that is intended for use with night vision imaging systems (NVIS). It is applicable to all systems, subsystems, component equipment, and hardware that provide the lighting environment on aircraft where NVIS are employed. This document is applicable to NVIS specific performance requirements but it does not contain general lighting requirements. The contracting activity should extract and tailor applicable general lighting requirements from JSSG-2010-5 and include those requirements in the contract.

MIL-STD-3010, DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST PROCEDURES FOR PACKAGING MATERIALS (30 DEC 2002) [SUPERSEDING FED-STD-101C]., This document provides a centralized listing of detailed and uniform test methods that have been developed to evaluate relevant properties of materials used in military packaging applications. These standardized test methods may be referenced by number in specific packaging material specifications, as applicable, thus eliminating the need to repetitively detail the standard test method in each material specification.

MIL-STD-3010A, DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST PROCEDURES FOR PACKAGING MATERIALS (18 AUG 2005)., This document provides a centralized listing of detailed and uniform test methods that have been developed to evaluate relevant properties of materials used in military packaging applications. These standardized test methods may be referenced by number in specific packaging material specifications, as applicable, thus eliminating the need to repetitively detail the standard test method in each material specification.

MIL-STD-3010B, DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST PROCEDURES FOR PACKAGING MATERIALS (31 MAR 2008)., This document provides a centralized listing of detailed and uniform test methods that have been developed to evaluate relevant properties of materials used in military packaging applications. These standardized test methods may be referenced by number in specific packaging material specifications, as applicable, thus eliminating the need to repetitively detail the standard test method in each material specification.

MIL-STD-3010B, DEPARTMENT OF DEFENSE, TEST METHOD STANDARD TEST PROCEDURES FOR PACKAGING MATERIALS (31 MAR 2008)., This document provides a centralized listing of detailed and uniform test methods that have been developed to evaluate relevant properties of materials used in military packaging applications. These standardized test methods may be referenced by number in specific packaging material specifications, as applicable, thus eliminating the need to repetitively detail the standard test method in each material specification.

MIL-STD-3012 (NOTICE 1), MILITARY STANDARD, INTERFACE STANDARD FOR DIGITAL MICROWAVE RADIOS AND MULTIPLEXERS (8 FEB 2008)., MIL-STD-3012, dated 27 November 2002, is hereby canceled without replacement.

MIL-STD-3013, DEPARTMENT OF DEFENSE STANDARD PRACTICE GLOSSARY OF DEFINITIONS, GROUND RULES, AND MISSION PROFILES TO DEFINE AIR VEHICLE PERFORMANCE CAPABILITY (14 FEB 2003) [SUPERSEDING MIL-C-5011A]., This standard establishes the definitions, ground rules, and mission profiles to determine the performance of fixed-wing air vehicles. This document is not intended to impose air vehicle performance requirements. It is intended to provide all conditions and limitations inherent in the definitions and ground rules which must be met when any item of performance included herein is calculated. It is not the purpose of this document to levy required values for these items of performance. Those requirements must be included in the appropriate Program Specifications.

MIL-STD-3014 (CHANGE 2), DEPARTMENT OF DEFENSE INTERFACE STANDARD FOR MISSION DATA EXCHANGE FORMAT (26 JAN 2007)., This standard defines a format for digital data files used for mission-level programming of weapon systems. The term format applies to the organization of data information in the file and the definition of approved data types.

MIL-STD-3015 (NOTICE 1)., DEPARTMENT OF DEFENSE INTERFACE STANDARD - Satellite Data Link Standard (SDLS) For Advanced Extremely High Frequency (AEHF) Extended Data Rate (XDR) Uplinks and Downlinks (U)., MIL-STD-3015 is a classified (SECRET/NOFORN) document that contains technical standards and design objectives for use by all Military Departments and Agencies in their systems requiring space/ground communications operating in the 44/20 GHz band and which support data rates from 75 bps to 8192 kbps for XDR up and down links for satellites in near circular, geosynchronous orbits. This standard can also be adopted for use in other types of orbits, after consideration of specific orbital parameters. This standard will ensure terminal-to-satellite and terminal-to-terminal interoperability between compliant satellites and terminals.

MIL-STD-3018, DOD STANDARD PRACTICE, PARTS MANAGEMENT (15 OCT 2007). This standard provides requirements for the implementation of an effective Parts Management Program (PMP) on Department of Defense (DoD) acquisitions. This document supports acquisition strategies and systems engineering practices. This document also provides performance-based parts management processes and practices which are intended to be adapted to individual program needs and which provide appropriate latitude for innovative approaches and design solutions by the contractors

MIL-STD-3020, DEPARTMENT OF DEFENSE STANDARD PRACTICE FIRE RESISTANCE OF U.S. NAVAL SURFACE SHIPS (7 NOV 2007)., This standard provides the fire resistance test method and acceptance criteria, following shock testing, for approval of N-Class and AN-Class divisions and their penetrations on U.S. Navy surface ships. The fire resistance test method described herein supersedes fire resistance test method requirements of Appendix A in MIL-PRF-32161, and American Bureau of Shipping (ABS) Naval Vessel Rules Part 1, Chapter 2, Section 1. This standard is applicable to fire resistant divisions constructed from steel, aluminum, and polymer composite structures. This standard does not address ignitability, surface flame spread, heat release rates, smoke density, fire gas toxicity or other material fire performance limits or basic system/component design requirements which may be imposed by other documents and the Naval Technical Authority (NTA).

MIL-STD-3021, DEPARTMENT OF DEFENSE MANUFACTURING PROCESS STANDARD, MATERIALS DEPOSITION, COLD SPRAY (4 AUG 2008)., The procedures covered by this standard are intended to ensure that cold spray coating operations, either manual or automated, meet prescribed requirements. This process can be used to restore dimensionally discrepant parts, or parts requiring protection from corrosion and wear (e.g. abrasion, cavitations, and erosion) but not limited to these applications.

MIL-STD-3022, DEPARTMENT OF DEFENSE STANDARD PRACTICE DOCUMENTATION OF VERIFICATION, VALIDATION, AND ACCREDITATION (VV&A) FOR MODELS AND SIMULATIONS (28 JAN 2008). This standard establishes templates for the four core products of the Modeling and Simulation (M&S) Verification, Validation, and Accreditation (VV&A) processes: Accreditation Plan; V&V Plan; V&V Report, and Accreditation Report. These documents are normally prepared and used at different times and by different groups; much of the information included in each is common and should be shared. The templates provide a common framework and interfacing capability between the four documents and support consistency and efficiency. Additionally, the plans and reports produced by following the templates serve as a communications device between the participants in the VV&A processes. Specific templates for each document are found in the appendices.

MIL-STD-3024, DEPARTMENT OF DEFENSE STANDARD PRACTICE PROPULSION SYSTEM INTEGRITY PROGRAM (PSIP) (15 APR 2008)., This standard describes the Propulsion System Integrity Program (PSIP) and defines the requirements to consider in order to achieve integrity in propulsion systems while the cost of ownership is minimized; and cost and schedule risks managed through a series of disciplined, timephased tasks. This standard details programmatic tasks for the development, acquisition, and sustainment of propulsion systems to ensure their integrity while affordability of these United States Air Force (USAF) systems is maintained throughout their period of use.

MIL-STD-3026, DEPARTMENT OF DEFENSE STANDARD PRACTICE, CHEMICAL CLEANING OF SEWAGE COLLECTION PIPING SYSTEMS ON NAVY SURFACE SHIPS (29 AUG 2008)., This standard covers the requirements for the use of chemical cleaning processes to remove scale accumulations from Navy surface ship sewage collection piping (hereinafter sewage piping unless otherwise indicated) systems.

MIL-STD-5522, DEPARTMENT OF DEFENSE TEST METHOD STANDARD TEST REQUIREMENTS AND METHODS FOR AIRCRAFT HYDRAULIC AND EMERGENCY PNEUMATIC SYSTEMS (17 MAR 2000)., This standard establishes test and test method requirements for aircraft and weapons hydraulic and emergency pneumatic systems design and installation with operating pressure ranges from 3,000 psi to 8,000 psi and temperature ranges from -65 deg F to + 450 deg F.

MIL-STD-6016C (NOTICE 2), DEPARTMENT OF DEFENSE INTEROPERABILITY STANDARD, TACTICAL DATA LINK (TDL) LINK-16 MESSAGE STANDARD (U) (2 NOV 2006)., MIL-STD-6016C is UNCLASSIFIED and contains the tactical data link (TDL) Link-16 message standard. This link was known as TADIL J in the past, or as JTIDS or MIDS by some. The purpose of this document is to provide a standardized set of Link-16 messages for DoD use. As authorized by DISA-GE332 the DoD controlling office for this MIL-STD, the distribution restriction of this military standard has been lowered from “D” to “C” (restricted to the federal government and its contractors). All allied releases of this standard continue to require a foreign disclosure authorization. ASSIST can provide copies of MIL-STD-6016C to federal employees. Federal contractors may obtain a copy of this MIL-STD from their government POC who can access ASSIST.

MIL-STD-6017A (NOTICE 1)., DEPARTMENT OF DEFENSE INTEROPERABILITY STANDARD VARIABLE MESSAGE FORMAT (VMF) MESSAGE STANDARD(U) (2 NOV 2006)., MIL-STD-6017A is UNCLASSIFIED and contains the VMF message standard. The purpose of this document is to provide a standardized set of VMF messages for DoD use. As authorized by DISA-GE332 the DoD controlling office for this MIL-STD, and as documented on the current version, the distribution restriction of this military standard was lowered from “D” to “C” (restricted to the federal government and its contractors). All allied releases of this standard continue to require a foreign disclosure authorization. ASSIST can provide copies of MIL-STD-6017 to federal employees. Federal contractors may obtain a copy of this MIL-STD from their government POC who has access to ASSIST. The PA is not responsible for distribution.

MIL-STD-6866, MILITARY STANDARD INSPECTION, LIQUID PENETRANT (22 NOV 1996) (S/S BY ASTM-E1417)., MIL-STD-6866, dated 29 November 1985, is hereby canceled aid replaced by American Society for Testing and Materials Standard ASTM E1417–95a entitled “Practice for Liquid Penetrant Examination.” CAUTION: The information is valid as of the date of this notice and may be superseded by subsequent revisions to ASTM E14 17–95a. (Application for copies of ASTM publications should be addressed to the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken PA 19428-2959.) Custodians: Air Force

MIL-STD-7080, MILITARY STANDARD, SELECTION AND INSTALLATION OF AIRCRAFT ELECTRIC EQUIPMENT (31 MAY 1994) [SUPERSEDES MIL-E-7080B]., This standard covers the general requirements for the selection and installation of electric equipment in military aircraft. Electric equipment includes electric power generation, conversion, storage, and distribution equipment, electric power control and protective devices, and motors.

MIL-STD-7179, MILITARY STANDARD FINISHES, COATINGS, AND SEALANTS, FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEMS (30 SEP 1997)[SUPERSEDING MIL-F-7179G]., This standard establishes the minimum requirements to be Considered for finishes, protective coatings, and sealants used in the protection of aerospace waepons systems.

MIL-STD-8591, DEPARTMENT OF DEFENSE DESIGN CRITERIA STANDARD AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE) (12 DEC 2006) [SUPERSEDING MIL-A-8591H]., This standard sets forth general structural and mechanical design criteria for airborne stores, suspension equipment and their associated interfaces. Provisions are included to promote interoperability among military aircraft of all Services of the Department of Defense and NATO members’ aircraft. Requirements are provided for design, analysis, and testing of airborne stores, suspension equipment and the aircraft-store interface during captive operations.