MIL-G-0028670A, MILITARY SPECIFICATION, GENERATOR SET, GAS TURBINE ENGINE, 750 KW, 50/60 HERTZ, PRIME, UTILITY (3 MAY 1976) [SUPERSEDING MIL-G-28670]., This specification covers an enclosed, gas turbine engine-driven, prime, (Type II) utility (Class 2) generator set, rated for 750 kilowatt (kW) at 60 Hertz (Hz), 625 kW at 50 Hz, 0.8 power factor (of), lagging, and reconnectable for the following voltage connections: (60 HZ AND 50 HZ).

MIL-G-10924F, MILITARY SPECIFICATION, GREASE, AUTOMOTIVE AND ARTILLERY (17 JUL 1989) [S/S BY MIL-PRF-10924G]., This specification covers one grade of a multi-purpose grease for lubrication of ground vehicles and equipment (see 6.1) and is identified by Military Symbol GAA and NATO Code Number G-403.

MIL-G-10944B (AMENDMENT 3), MILITARY SPECIFICATION, GAGE, DIMENSIONAL CONTROL (19 FEB 1982)., This amendment forms a Dart of Mi1itarv Specification MIL-G-10944B, dated 12 October 1965, and is approved-for use by al1 Departments and Agencies of the Department of Defense.

MIL-G-10944B, MILITARY SPECIFICATION, GAGE, DIMENSIONAL CONTROL (12 OCT 1965)., This specification covers dimensional control gages and is to be used in conjunction with the applicable drawings or documents that depict the type required.

MIL-G-1175B (NOTICE 1), MILITARY SPECIFICATION GUN, SUBMACHINE, CALIBER .45, M3A1 (18 APR 1986)., This notice should be filed in front of MIL-G-1175B, dated 13 March 1968. MIL-G-1175B has been reviewed and determined to be valid for use in acquisition.

MIL-G-1175B, MILITARY SPECIFICATION GUN, SUBMACHINE, CALIBER .45, M3A1 (13 MAR 1968)., 1.1 This specification covers one type of fully automatic, air-cooled, blowback operated, magazine fed, submachinegun.

MIL-G-12803C, MILITARY SPECIFICATION, GASKET MATERIAL, NON-METALIC (12 MAY 1989) [S/S BY ASTM-F104]., This specification covers gasket stock made from non-metallic materials and suitable for general automotive, aeronautical and other mechanical applications. This specification does not cover molded gaskets, rubber or plastic sheet gaskets which are covered by other specifications.

MIL-G-1298A, MILITARY SPECIFICATION, GUNS, MACHINE, (CALIBRE .50, BROWNING, M2, HEAVY BARREL (10 OCT 1955)., This specification covers automatic, recoil-operated, link-belt fed, air-cooled caliber .50 heavy barrel machine guns for fixed or flexible installation on ground mounts and combat vehicles.

MIL-G-13665, MILITARY SPECIFICATION, GUN, MACHINE, BROWNING, CALIBER .30, M1919A6 (WITH SPARE PARTS) (24 SEP 1954)., This specification covers one type of Browning, Caliber .30, Machine Gun, with shoulder stock and biped mount, and known as Gun, Machine, Browning, Caliber .30, M1919A6.

MIL-G-14931, MILITARY SPECIFICATION, GREASE , SILICONE FOR USE WITH AMMUNITION (22 NOV 1968)., This Military Specification covers one type of silicone grease for use in ammunition (see 6. 2).

MIL-G-155A (AMENDMENT 2), MILITARY SPECIFICATION GRAPHITE, DRY (FOR USE IN AMMUNITION) (13 JUL 1967) [SUPERSEDING AMENDMENT 1].

MIL-G-155A, MILITARY SPECIFICATION GRAPHITE, DRY (FOR USE IN AMMUNITION) (20 SEP 1962) [SUPERSEDING JAN-G-155]., This specification covers four grades of graphite for use in ammunition.

MIL-G-174B (NOTICE 1), DETAIL SPECIFICATION GLASS, OPTICAL (20 AUG 1988)., MIL-G-174B dated 5 December 1986 is inactive for new design and no longer used except for replacement purposes.

MIL-G-174B (NOTICE 2), DETAIL SPECIFICATION GLASS, OPTICAL (28 JUL 2004)., MIL-G-174B remains inactive for new design, however, the document is valid for use.

MIL-G-174B, DETAIL SPECIFICATION GLASS, OPTICAL (5 DEC 1986)., This specification establishes the requirements for optical glass to be used in the fabrication of optical elements.

MIL-G-17713D(YD) (NOTICE 1), MILITARY SPECIFICATION, GAGES, LIQUID LEVEL MEASURING, TANK (17 JAN 1997)., Military Specification MIL-G-17713D(YD), dated 26 July 1988, is hereby canceled. Future acquisition of this material should refer to Commercial Item Description A-A-50568.

MIL-G-17859D, MILITARY SPECIFICATION GEAR ASSEMBLY, PROPULSION (NAVAL SHIPBOARD USE) (30 SEP 1993)., This specification covers reduction gears (including fittings, accessories and reports) for use in Naval submarine and surface ship main propulsion systems where such gears are not integral with or part of the prime mover.

MIL-G-18014B (AMENDMENT 1), GRATINGS, METAL, BARTYPE FLOORING, NAVAL SHIPBOARD (12 FEB 1968).

MIL-G-18014B, GRATINGS, METAL, BARTYPE FLOORING, NAVAL SHIPBOARD (15 MAR 1967)., This specification covers open, bar-type gratings, (flooring), for shipboard use.

MIL-G-19788 (NOTICE 1), MILITARY SPECIFICATION, GOLD PLATING (ELECTRODEPOSITED) (8 DEC 1977) [S/S BY MIL-G-45204].

MIL-G-20241D (AMENDMENT 1), MILITARY SPECIFICATION, GASKET MATERIAL, WOOL FELT, IMPREGNATED, ADHESIVE, PRESSURE-SENSITIVE (12 MAR 1980) [S/S BY ZZ-R-765 AND MIL-I-24391]., This amendment forms a part of Military Specification MIL-G-20241D, dated 12 March 1980, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-G-20241D (NOTICE 1), MILITARY SPECIFICATION, GASKET MATERIAL, WOOL FELT, IMPREGNATED, ADHESIVE, PRESSURE-SENSITIVE (27 OCT 1989) [S/S BY ZZ-R-765 AND MIL-I-24391]., MIL-G-20241D, dated 12 March 1980, and Amendment 1 dated 12 April 1984, are hereby canceled. Future acquisition for gasket material used in ventilation ducts should be made under ZZ-R-765 - Rubber Silicone. Gasket material used as a fraying material should-be made under MIL-I-24391 - Insulation Tape, Electrical, Plastic, Pressure Sensitive.

MIL-G-20241D, MILITARY SPECIFICATION, GASKET MATERIAL, WOOL FELT, IMPREGNATED, ADHESIVE, PRESSURE-SENSITIVE (12 MAR 1980) [S/S BY ZZ-R-765 AND MIL-I-24391]., This specification covers gasket material (symbol 2291) for use in joints of non-watertight and watertight ventilation ducts and as a faying or insulating material between dissimilar metals.

MIL-G-20697, MILITARY SPECIFICATION, GUN, MACHINE, CAL. 50, BROWNING, M2, HEAVY BARREL, ALL TYPES, PACKAGING OF (28 JUN 1957)., This specification covers the packaging and packing of Gun, Machine, Cal .50, Browning, M2, Heavy Barrel, (Fixed, Flexible and Turret types ) for each level of protection,

MIL-G-21164D, MILITARY SPECIFICATION, GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NATO CODE NUMBER G-353 (8 DEC 1981)., This specification covers the requirements for one grade of low and high temperature molybdenum disulfide grease for use as a lubricant on heavily loaded sliding steel surfaces. This grease is identified by NATO Symbol G-353 Military Symbol GMD.

MIL-G-21296B, MILITARY SPECIFICATION, GENERATOR SET, DIESEL ENGINE DIRECT AND ALTERNATING CURRENT (NAVAL SHIPBOARD USE) (21 MAR 1994)., This specifiction covers constant speed, continuous duty direct current (dc) and alternating current (ac) diesel engine generator sets.

MIL-G-22077C, MILITARY SPECIFICATION, GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE (3 NOV 1993)., This specification covers gas turbine generator sets rated up to 1,000 kilowatts (kW) direct current (dc) and up to 3,500 kW alternating current (ac) for shipboard use

MIL-G-24696B (AMENDMENT 1), MILITARY SPECIFICATION, GASKET, SHEET, NON-ASBESTOS (18 FEB 1998) [S/S BY MIL-DTL-24696C]., This amendment forms a part of MIL-G-24696B(SH), dated 25 May 1995, and is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

MIL-G-24696B, MILITARY SPECIFICATION, GASKET, SHEET, NON-ASBESTOS (25 MAY 1995) [S/S BY MIL-DTL-24696C]., This specification establishes the requirements of non-asbestos sheet gasket material for non-propulsion and propulsion steam and water applications and for all petroleum based hydraulic oil applications.

MIL-G-24696B/1A, MILITARY SPECIFICATION SHEET, GASKET, SHEET, NON-ASBESTOS, SIZES AND TOLERANCES (25 MAY 1995) [S/S BY MIL-DTL-24696C]., The purpose of this specification sheet is to setup a part numbering system for gaskets procured to MIL-G-24696.

MIL-G-24716A, MILITARY SPECIFICATION, GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND (5 APR 1993)., This specification covers spiral wound metallic-flexible graphite gaskets for use in both pipe line joints and other applications where pressure and temperature conditions do not exceed 2500 pounds per square inch (psi) and 1050 degrees Fahrenheit (*F).

MIL-G-25013E, MILITARY SPECIFICATION, GREASE, AIRCRAFT, BALL AND ROLLER BEARING, NATO CODE NUMBER G-372 (20 JUN 1983)., This specification covers the requirements for one grade of grease for use in anti-friction bearings where operation of low torque equipment will require lubrication for extended periods at temperatures as low as -73 Degrees C and as high as 232 Degrees C. This grease is identified by NATO symbol G-372 (see 6.5).

MIL-G-25537C (AMENDMENT 1), MILITARY SPECIFICATION, GREASE, AIRCRAFT, HELICOPTER OSCILLATING BEARING, NATO CODE NUMBER G-366 (8 APR 1988).

MIL-G-25537C, MILITARY SPECIFICATION, GREASE, AIRCRAFT, HELICOPTER OSCILLATING BEARING, NATO CODE NUMBER G-366 (29 JUN 1984)., This specification covers the requirements for one grade of grease for use in aircraft bearings having oscillatory motion of small amplitude. This grease is identified by NATO symbol G-366 (see 6.5).

MIL-G-25667 (AMENDMENT 1), MILITARY SPECIFICATION, GLASS, MONOLITHIC, AIRCRAFT GLAZING (16 FEB 1971) [S/S BY SAE-AMS-G-25667].

MIL-G-25667, MILITARY SPECIFICATION, GLASS, MONOLITHIC, AIRCRAFT GLAZING (15 JUN 1970) [S/S BY SAE-AMS-G-25667]., This specification covers monolithic glass for use in aircraft glazing.

MIL-G-25871B (AMENDMENT 1), MILITARY SPECIFICATION, GLASS, LAMINATED, AIRCRAFT GLAZING (30 DEC 1985) (S/S BY SAE-AMS-G-25871).

MIL-G-25871B, MILITARY SPECIFICATION, GLASS, LAMINATED, AIRCRAFT GLAZING (27 NOV 1978) (S/S BY SAE-AMS-G-25871)., This specification covers laminated glass, ready-cut, with various types of edge attachments, for use in aircraft glazing.

MIL-G-3036C, MILITARY SPECIFICATION GROMMET, ELASTIC, HOT OIL AND COOLANT RESISTANT (20 MAR 1978) [S/S BY NASM3036]., This specification covers two compositions of grommet suitable for use in applications requiring resistance to hot petroleum-based opil, coolant, fungus or ozone, and for use in less severe applications.

MIL-G-3056F (AMENDMENT 2), MILITARY SPECIFICATION GASOLINE, AUTOMOTIVE, COMBAT (18 MAY 1992) [S/S BY ASTM-D4814].

MIL-G-3056F (NOTICE 1), MILITARY SPECIFICATION GASOLINE, AUTOMOTIVE, COMBAT (11 SEP 1998) [S/S BY ASTM-D4814]., MIL-G-3056F, dated 14 November 1991, is hereby canceled. Future acquisition for this material should refer to ASTM D4814, "Standard Specification for Automotive Spark-Ignition Engine Fuel."

MIL-G-3056F, MILITARY SPECIFICATION GASOLINE, AUTOMOTIVE, COMBAT (14 NOV 1991) [S/S BY ASTM-D4814]., This specification covers combat-grade gasolines suitable for OCONUS use in all gasoline engines other than aircraft under all conditions of service.

MIL-G-3278A (NOTICE 1), MILITARY SPECIFICATION, GREASE, AIRCRAFT AND INSTRUMENT (FOR LOW AND HIGH TEMPERATURES) (10 JUL 1994) [SUPERSEDED BY MIL-G-23827].

MIL-G-38220 (NOTICE 1), MILITARY SPECIFICATION, GREASE, AIRCRAFT, HIGH SPEED, BALL AND ROLLER BEARING (2 JUL 1979) [S/S BY MIL-G-27617]., Specification MIL-G-38220(USAF), dated 27 April 1967, is hereby canceled. Future Air Force procurement of Grease, Aircraft, High Speed, Ball and Roller Bearing should be made under Military Specification MIL-G-27617, Grease,. Aircraft and Instrument, Fuel and Oxidizer Resistant.

MIL-G-45185 (INTERIM AMENDMENT 4), GUN, AUTOMATIC, 20-MM, M39A2 (W/REPAIR PARTS AND W/O EQUIPMENT OR ACCESSORIES) (6 JUN 1967)., This Interim Amendment is issued for use by the Department of the Army with Military Specification MIL-G-45185, dated 16 October 1958.

MIL-G-45185, GUN, AUTOMATIC, 20-MM, M39A2 (W/REPAIR PARTS AND W/O EQUIPMENT OR ACCESSORIES) (16 OCT 1958)., This specification covers the requirements for one type of 20-MM gas operated, belt fed, electrically fired, revolver type weapon that may be adapted to either right hand or left hand feed (see 6.1).

MIL-G-45204C (NOTICE 1), MILITARY SPECIFICATION GOLD PLATING, ELECTRODEPOSITED (7 APRIL 1998)., MIL-G-45204C, dated 7 June 1983, and AMENDMENT 3, dated 9 June 1993, are hereby canceled. Users may consult the appropriate portions of AMS 2422, "Plating, Gold" and/or ASTM B488, “Electrodeposited Coatings of Gold for Engineering Uses” as possible replacements. Users are cautioned to evaluate AMS 2422 and ASTM B488 for their particular application before citing them as replacement documents. (Application for copies of AMS publications should be addressed to the Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096.) (Application for copies of ASTM publications should be addressed to the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)

MIL-G-45204C (NOTICE 2), MILITARY SPECIFICATION, GOLD PLATING, ELECTRODEPOSITED (28 JUNE 2007)., MIL-G-45204C, dated 7 June 1983, including Amendment 3, dated 9 June 1993, are hereby reinstated and may be used for acquisition.

MIL-G-45204C, MILITARY SPECIFICATION GOLD PLATING, ELECTRODEPOSITED (7 JUN 1983)., This specification covers electrodeposited gold plating on metallic surfaces.

MIL-G-45397D (AMENDMENT 2), MILITARY SPECIFICATION, GUN, FIELD ARTILLERY, SELF PROPELLED, 175MM, M107, HOWITZER, HEAVY, SELF PROPELLED, 8 INCH, M110 AND M110A1 (17 FEB 1977).

MIL-G-45397D (NOTICE 1), MILITARY SPECIFICATION, GUN, FIELD ARTILLERY, SELF PROPELLED, 175MM, M107, HOWITZER, HEAVY, SELF PROPELLED, 8 INCH, M110 AND M110A1 (8 FEB 1996).

MIL-G-45397D, MILITARY SPECIFICATION, GUN, FIELD ARTILLERY, SELF PROPELLED, 175MM, M107, HOWITZER, HEAVY, SELF PROPELLED, 8 INCH, M110 AND M110A1 (16 JUN 1969)., This specification covers a front-sprocket-driven, full-tracked, lightly armored combat vehicle, with individual torsion bar suspension, and mounting a 175MM gun or 8 inch howitzer.

MIL-G-45653 (AMENDMENT 2), MILITARY SPECIFICATION, GAGE, CYLINDRICAL PLUG AND RING, PLAIN (8 JUN 1983).

MIL-G-45653, MILITARY SPECIFICATION, GAGE, CYLINDRICAL PLUG AND RING, PLAIN (30 DEC 1959)., This specification covers manufacture, inspection, and preparation for delivery requirements for plain cylindrical, plug and plain ring gages listed in Military Standards 110, 111, 112, 113, 116, 117, 133, and 134 and for plain cylindrical plug gages and plain ring gages made to American Gage Design Standard (AGD) specifications of sizes not listed in a Military Standard (Prototypes of the Mil-Stds.)

MIL-G-46886B, MILITARY SPECIFICATION, GREASE, SILICON (17 AUG 1992) [S/S BY A-A-59173]., This specification covers two types of lubricating silicone grease.

MIL-G-48771, MILITARY SPECIFICATION, GRAPHITE - SPECIAL PURPOSE (FOR USE IN AMMUNITION) (19 JUN 1975)., This specification covers one grade of Graphite for use in lithium reserve type batteries.

MIL-G-5514G, MILITARY SPECIFICATION GLAND DESIGN; PACKINGS, HYDRAULIC, GENERAL REQUIREMENTS FOR (1 NOV 1993)., This specification covers basic design criteria recommendations for use and application in packings, gaskets, packing and gasket glands and related features for use in hydraulic equipment utilized in systems designed in accordance with MIL-H-5440.

MIL-G-5572F (AMENDMENT 1), MILITARY SPECIFICATION, GASOLINE, AVIATION: GRADES 80/87, 100/130, 115/145 (13 MAR 1979) [S/S BY ASTM-D910].

MIL-G-5572F, MILITARY SPECIFICATION, GASOLINE, AVIATION: GRADES 80/87, 100/130, 115/145 (24 JUL 1969) [S/S BY ASTM-D910]., This specification covers aviation gasoline for aircraft piston engines.

MIL-G-6032D (AMENDMENT 1), MILITARY SPECIFICATION, GREASE, PLUG VALVE, GASOLINE AND OIL RESISTANT, NATO CODE NUMBER G-363, METRIC (8 APR 1988) [S/S BY SAE-AMS-G-6032].

MIL-G-6032D, MILITARY SPECIFICATION, GREASE, PLUG VALVE, GASOLINE AND OIL RESISTANT, NATO CODE NUMBER G-363, METRIC (29 JUN 1984) [S/S BY SAE-AMS-G-6032]., This specification covers the requirements for two types of gasoline and oil resistant grease for lubrication of tapered plug valves, gaskets, and for other applications in fuel and oil systems. The Type I grease is identified by NATO Symbol G-363 (see 6.2).

MIL-G-81827A, MILITARY SPECIFICATION, GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE (24 JAN 1983)., This specification covers the requirements for one grade of grease for use as a lubricant on heavily loaded sliding steel surfaces.

MIL-G-81937A (AMENDMENT 1), MILITARY SPECIFICATION GREASE, INSTRUMENT, ULTRA-CLEAN, METRIC (31 JUL 2002)., This amendment forms a part of Military Specification MIL-G-81937A, dated 27 December 1984, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-G-81937A (AMENDMENT 1), MILITARY SPECIFICATION GREASE, INSTRUMENT, ULTRA-CLEAN (31 JUL 2002).

MIL-G-81937A, MILITARY SPECIFICATION GREASE, INSTRUMENT, ULTRA-CLEAN (27 DEC 1984)., This specification covers the requirements for one grade of an ultra-clean instrument grease with characteristics which permit its use from -54 deg. C to 121 deg. C.

MIL-G-81937A, MILITARY SPECIFICATION, GREASE, INSTRUMENT, ULTRA-CLEAN (27 DEC 1984)., This specification covers the requirements for one grade of an ultra-clean instrument grease with characteristics which permit it s use from -54°C to 121°C.

MIL-G-82673, MILITARY SPECIFICATION GRAPHITE, NATURAL, POWERED, TECHNICAL (23 NOV 1977)., This specification covers the requirements for the procurement of one type of ground Ceylon-type graphite

MIL-G-83380, MILITARY SPECIFICATION, GENERATOR SET, GAS TURBINE ENGINE DRIVEN, 60KW, 400 HZ (31 FEB 1979)., This specification covers the general requirements for turbine engine-driven (GTED), tactical utility, 30- and 60-KW, 400 Hertz (Hz) generator sets for military applications. The general characteristics of the sets are described in MIL-STD-633.

MIL-G-85613, MILITARY SPECIFICATION, GROMMET, HARD SEAT, SWAGED, COUNTERSINK; GENERAL SPECIFICATION FOR (5 OCT 1983)., This specification covers swaged grommets for use in countersink holes of access panels.