MIL-S-0055541H, MILITARY SPECIFICATION, SHELTER, ELECTRICAL EQUIPMENT S-250( )/G (NO S/S DOCUMENT)(20 DEC 1991)., This specification covers one type of Shelter, Electrical Equipment S-250()/G.

MIL-S-008806B, MILITARY SPECIFICATION, SOUND PRESSURE LEVELS IN AIRCRAFT, GENERAL SPECIFICATION FOR (21 SEP 1970) (FUTURE PROCUREMENT - SEE MIL-STD-1789). This specification covers the general requirements for maximum allowable sound pressure levels in aircraft crew and passenger compartments and the testing requirements for determining conformance to these levels.

MIL-S-11207D, MILITARY SPECIFICATION STEEL SHEETS, CORRUGATED, 2-1/2-INCH NOMINAL CORRUGATIONS, PAINTED OR UNPAINTED (20 AUG 1979) [S/S BY A-A-52313]., This specification covers painted or unpainted corrugated steel sheets.

MIL-S-12204C, MILITARY SPECIFICATION, SOLDER, LEAD-TIN ALLOY (4 JAN 1974) [S/S BY ASTM-B32]., This specification covers solder intended for use on aluminum and aluminum alloys.

MIL-S-12227F, MILITARY SPECIFICATION, SUIT, TOXICOLOGICAL AGENTS PROTECTIVE COVER, COOLING 8 MAY 1989)., This specification covers the requirements for a two-piece cotton birdseye cloth cooling suit comprised of a jacket and trousers.

MIL-S-13165C, MILITARY SPECIFICATION SHOT PEENING OF METAL PARTS (7 JUN 1989)., This specification covers procedure requirements for shot peening of metal parts, to induce residual compressive stresses in specified surfaces, for the purpose of improving resistance to fatigue, stress corrosion cracking, and galling

MIL-S-13949/22B (NOTICE 1), MILITARY SPECIFICATION, SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL BF (NONWOVEN ARAMID REINFORCEMENT, EPOXY RESIN, METAL CLAD OR UNCLAD) (1 AUG 1997)., This notice should be filed in front of MIL-S-13949/22B, dated 25 January 1993. MIL-S-13949/22B is inactive for new design and is no longer used, except for replacement purposes. The Qualified Products List (QPL) associated with this inactive for new design specification will be maintained until acquisition of the product is no longer required, whereupon the specification and QPL will be canceled.

MIL-S-13949H (AMENDMENT 2), MILITARY SPECIFICATION, SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR (29 FEB 1996) [SUPERSEDING MIL-P-13949H]., This amendment forms a part of MIL-S-13949H dated 31 March 1993, and is approved for use by all Departments and Agencies of the Department of Defense

MIL-S-13949H (SUPPLEMENT 1), MILITARY SPECIFICATION, SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR (16 AUG 1993) [SUPERSEDING MIL-P-13949G].

MIL-S-13949H, MILITARY SPECIFICATION SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR (31 MAR 1993) [SUPERSEDING MIL-P-13949G]., This specification establishes the general requirements for fully cured metal clad or unclad laminates and prepreg to be used primarily for the fabrication of printed wiring for electrical and electronic circuits.

MIL-S-15464B, MILITARY SPECIFICATION, STEEL ALLOY, CHROMIUM-MOLYBDENUM; CASTINGS (15 JUN 1953) [S/S BY MIL-C-24707/2, ASTM-A217 AND ASTM-A389]., This specification covers heat treated alloy steel castings suitable for Naval use at temperatures not in excess of 1050 Deg. Fahrenheit (F).

MIL-S-16165E (SH), MILITARY SPECIFICATION SHIELDING HARNESSES, SHIELDING ITEMS AND SHIELDING ENCLOSURES FOR USE IN THE REDUCTION OF INTERFERENCE FROM ENGINE ELECTRICAL SYSTEMS () [SUPERSEDING MIL-I-16165D(SHIPS)]., This specification covers requirements for interference shielding items, shielding harnesses and shielding enclosures for engine electrical systems aboard Naval ships, at advance bases, and in the vicinity of electronic installations. It includes the allowable electromagnetic interference limits for such items and the permissible limits for auxiliary devices normally installed on electrical wiring systems associated with these engines.

MIL-S-16216K (NOTICE 1), MILITARY SPECIFICATION, STEEL PLATE, ALLOY, STRUCTURAL, HIGH YIELD STRENGTH (HY-80 AND HY-100) (5 JUN 2003) [S/S BY T9074-BD-GIB-010/300]., MIL-S-16216K(SH), dated 19 June 1987, is hereby canceled. T9074-BD- GIB-010/300, "Base Materials for Critical Applications: Requirements for Low Alloy Steel Plate, Forgings, Castings, Shapes, Bars, and Heads of HY- 80/100/130 and HSLA-80/100", with Change Notice 1, has been determined to be the suitable replacement. Users are cautioned to evaluate this document for their particular application before citing it as a replacement document.

MIL-S-16216K, MILITARY SPECIFICATION, STEEL PLATE, ALLOY, STRUCTURAL, HIGH YIELD STRENGTH (HY-80 AND HY-100) (19 JUN 1987) [S/S BY T9074-BD-GIB-010/300]., This specification covers grade HY-80 and grade HY-100, sheared or gas cut, alloy steel plates, intended primarily for use in critical applications where a notch-tough high-strength material is required.

MIL-S-16626D, MILITARY SPECIFICATION SLINGS, CARGO NET (NYLON OR MANILA) (11 MAY 1971) [S/S BY A-A-52534]., This specification covers three sizes of cargo net slings made of manila rope, nylon rope, or nylon braided cord.

MIL-S-17917A, MILITARY SPECIFICATION, SANDWICH CONSTRUCTION, ALUMINUM ALLOY FACINGS, BALSA WOOD CORE (9 JUL 1969)., This specification covers the requirements for structural sandwich composites consisting of aluminum alloy facings and balsa wood cores for aircraft structural application.

MIL-S-18313G, MILITARY SPECIFICATION SLINGS, CARGO, NET, NYLON WEBBING (11 APR 1978)., This specification covers flexible, lightweight with low storage cube nylon webbing, net, cargo slings.

MIL-S-18471G (AS), MILITARY SPECIFICATION, SYSTEM, AIRCREW AUTOMATED ESCAPE, EJECTION SEAT TYPE: GENERAL SPECIFICATION FOR (8 JUN 1983)., This specification establishes the requirements for the design, installation, demonstration, performance, and testing of an open type ejection seat aircrew automated escape systems. The escape system includes the ejection seat assembly, the aircraft canopy and escape path clearance subsystem the sequencing subsystem aircraft interface and the air crewmember interface.

MIL-S-18729C (AMENDMENT 1), MILITARY SPECIFICATION, STEEL PLATE, SHEET, AND STRIP, ALLOY, 4130, AIRCRAFT QUALITY (28 APR 1966) [S/S BY SAE-AMS6350, SAE-AMS6351 OR SAE-AMS6345].

MIL-S-18729C (NOTICE 1), MILITARY SPECIFICATION, STEEL PLATE, SHEET, AND STRIP, ALLOY, 4130, AIRCRAFT QUALITY (9 MAY 1997) [S/S BY SAE-AMS6350, SAE-AMS6351 OR SAE-AMS6345].

MIL-S-18729C, MILITARY SPECIFICATION, STEEL PLATE, SHEET, AND STRIP, ALLOY, 4130, AIRCRAFT QUALITY (5 MAR 1965) [S/S BY SAE-AMS6350, SAE-AMS6351 OR SAE-AMS6345]., This specification covers chrome-molybdenum alloy 4130, steel sheet, strip, and plate of thickness to and including 1.50 inches.

MIL-S-19434B, MILITARY SPECIFICATION STEEL GEAR AND PINION FORGINGS, CARBON AND ALLOY, HEAT TREATED, NAVAL SHIPBOARD PROPULSION UNIT AND AUXILIARY TURBINE (31 DEC 1990)., This specification covers forging rims and blanks for gears and pinions to be used in gear assemblies for Naval shipboard propulsion units and auxiliary turbines.

MIL-S-19653B (NOTICE 1), MILITARY SPECIFICATION, SEALING COMPOUND (WOOD BEDDING)(13 JUL 1999)., MIL-S-19653B, including Amendment 2, dated 26 August 1992, is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-19653B (SH), MILITARY SPECIFICATION SEALING COMPOUND (WOOD BEDDING), FORTIFIED (27 JUL 1984)., This specification covers a permanently plastic, waterproofing sealing compound for use between inner and outer planking of double planked hulls, and on other faying surfaces of wooden craft to prevent the passage or accumulation of water and to resist deterioration by decay fungi.

MIL-S-19653B(SH) (AMENDMENT 1), MILITARY SPECIFICATION, SEALING COMPOUND (WOOD BEDDING), FORTIFIED (19 FEB 1990)., This amendment forms a part of MIL-S-19653B(SH),dated 27 July 1984,and is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

MIL-S-19653B(SH) (AMENDMENT 2), MILITARY SPECIFICATION, SEALING COMPOUND (WOOD BEDDING), FORTIFIED (26 AUG 1992)., This amendment forms part of MIL-S-19653(SH), dated 27 July 1984, and is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

MIL-S-19653B(SH), MILITARY SPECIFICATION, SEALING COMPOUND (WOOD BEDDING), FORTIFIED (27 JUL 1984)., This specification covers a permanently plastic, waterproofing sealing compound for use between inner and outer planking of double planked hulls, and on other faying surfaces of wooden craft to prevent the passage or accumulation of water and to resist deterioration by decay fungi.

MIL-S-21472C, MILITARY SPECIFICATION SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR (31 OCT 1988) [S/S BY NASM21472]., This specification covers hexagaon slotted-head shoulder screws and socket-head shoulder screws

MIL-S-22141B (NOTICE 1), MILITARY SPECIFICATION STEEL INVESTMENT CASTINGS ALLOY AND CARBON (6 NOV 1991).

MIL-S-22141B, MILITARY SPECIFICATION STEEL INVESTMENT CASTINGS ALLOW AND CARBON (13 APR 1976)., This specification covers alloy and carbon steel castings made by the investment precision casting process.

MIL-S-22664B (SH) (AMENDMENT 1), MILITARY SPECIFICATION STEEL, STRUCTURAL SHAPES ALLOY, HIGH YIELD STRENGTH (HY-80 AND HY-100) (23 APR 1991).

MIL-S-22664B (SH) (NOTICE 1), MILITARY SPECIFICATION STEEL, STRUCTURAL SHAPES ALLOY, HIGH YIELD STRENGTH (HY-80 AND HY-100) (5 JUN 2003)., MIL-S-22664B(SH), dated 15 March 1988, with Amendment 1, dated 23 April 1991, is hereby canceled. T9074-BD-GIB-010/300, "Base Materials for Critical Applications: Requirements for Low Alloy Steel Plate, Forgings, Castings, Shapes, Bars, and Heads of HY-80/100/130 and HSLA-80/100", with Change Notice 1, has been determined to be the suitable replacement. Users are cautioned to evaluate this document for their particular application before citing it as a replacement document.

MIL-S-22664B (SH), MILITARY SPECIFICATION STEEL, STRUCTURAL SHAPES ALLOY, HIGH YIELD STRENGTH (HY-80 AND HY-100) (15 MAR 1988)., This specification covers HY-80 and HY-100 alloy steel rolled and extruded shapes for use in applications where good weldability and notch toughness are required.

MIL-S-22698C (AMENDMENT 1), MILITARY SPECIFICATION STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL (20 OCT 1994).,

MIL-S-22698C (SH) (AMENDMENT 2), MILITARY SPECIFICATION STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL (20 OCT 1994)., This amendment forms a part of MIL-S-22698C(SH), dated 29 June 1988, and is approved for use by the Naval Sea Systems Command, Departments and Agencies of the Department of Defense.

MIL-S-22698C, MILITARY SPECIFICATION STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL (29 JUN 1988)., This specification covers ordinary strength and higher strength steel plate, shapes and bars.

MIL-S-22824E, MILITARY SPECIFICATION SLINGS, MULTIPLE LEG, VEHICLE (SHIPBOARD LOADING (14 SEP 1993)[S/S BY FF-S-2874]., This specification covers multiple leg slings for shipboard loading of vehicles.

MIL-S-23190/1A, MILITARY SPECIFICATION, STRAP, CLAMPS, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT (27 SEP 1974) [S/S BY SAE-AS23190/1].

MIL-S-23190/2, MILITARY SPECIFICATION, STRAPS, CLAMPS, PLASTIC AND METAL, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, METAL, CUSHIONED, ADJUSTABLE, WIRE SUPPORT, TYPE V, CLASS 1 (28 MAR 1986) [S/S BY SAE-AS23190/2].

MIL-S-23190/3, MILITARY SPECIFICATION, STRAP, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT STRAP, TIE DOWN, ADJUSTABLE, CORROSION RESISTANT STEEL TYPE VI, CLASS 1 (28 MAR 1986 [S/S BY SAE-AS23190/3].

MIL-S-23190E (AMENDMENT 1), MILITARY SPECIFICATION, STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT (30 DEC 1987) [S/S BY SAE-AS23190].

MIL-S-23190E, MILITARY SPECIFICATION, STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT (28 MAR 1976) [S/S BY SAE-AS23190]., This specification covers a series of plastic and metal components and devices used for the tying and support of cable, cable assemblies and wire in electrical, electronic and communications equipment, and in interconnection systems.

MIL-S-23284A, MILITARY SPECIFICATION, STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, PROPELLER NUTS, COUPLINGS, AND STOCKS (RUDDERS AND DIVING PLANES) (15 JUN 1990)., This specification covers carbon and alloy steel forgings for torsional shafts, including propulsion shafts for ships, sleeves, couplings, propeller nuts, rudder stocks, diving plane stocks, and related parts.

MIL-S-23284A, STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, NUTS, COUPLINGS, AND STOCKS (RUDDERS AND SLEEVES, PROPELLER DIVING PLANES). This specification covers carbon and alloy steel forgings for torsional shafts, including propulsion shafts for ships, sleeves, couplings , propeller nuts, rudder stocks, diving plane stocks, and related parts.

MIL-S-24020A (NOTICE 1), MILITARY SPECIFICATION SONOBUOY AN/SSQ-48 (NO S/S DOCUMENT). Specification MIL-S-24020 (WEP) dated 1 November 1965 is hereby canceled.

MIL-S-24149C (AMENDMENT 1), MILITARY SPECIFICATION, STUDS, WELDING, AND ARC SHIELDS (FERRULES), GENERAL SPECIFICATION FOR (1 DEC 1989).

MIL-S-24149C, MILITARY SPECIFICATION, STUDS, WELDING, AND ARC SHIELDS (FERRULES), GENERAL SPECIFICATION FOR (1 JUN 1981)., This specification covers studs for welding with stud welding equipment and arc shields (ferrules) for shielding studs where applicable.

MIL-S-24214A, MILITARY SPECIFICATION, SHACKLES, STEEL, GENERAL PURPOSE REGULAR AND HIGH STRENGTH (10 OCT 1990) [S/S BY RR-C-271]., MIL-S-24214A(SH) , dated 20 June 1986, is hereby canceled. Future acquisition should be made under federal specification RR-C-271, Chains and Attachments, Welded and Weldless.

MIL-S-24948A, MILITARY SPECIFICATION SLACKS, WOMEN'S (WITH SIDE POCKETS) (10 FEB 1993)., This specification covers the requirements for women's side pocket slacks with straight and bell bottom legs.

MIL-S-25043C, MILITARY SPECIFICATION STEEL PLATE, SHEET, AND STRIP, 17-7 PH, CORROSION RESISTANT, PRECIPITATION HARDENING (9 MAY 1997) (S/S BY SAE-AMS5528 OR SAE-AMS5529)., MIL-S-25043C, dated 5 November 1965, is hereby canceled. Future acquisitions for this material should refer to the following SAE-AMS specifications, depending on which condition is desired, as indicated below.

MIL-S-28633C, MILITARY SPECIFICATION, SHELTER, EQUIPMENT, MULTIPURPOSE (20 MAY 1988) [S/S BY MIL-C-28689]., This specification covers one type of portable, multipurpose equipment shelter nominal 8 feet by 6 feet 8 inches.

MIL-S-29432B, MILITARY SPECIFICATION SLACKS, WOMEN'S (1 JUN 1994)., This specification covers the requirements for women's slacks.

MIL-S-29435B, MILITARY SPECIFICATION, MILITARY SPECIFICATION, SHELTER, ELECTRONICS MAINTENANCE COMPLEX (EMC); 10 FOOT, ELECTROMAGNETIC INTERFERENCE (EMI), 20 FOOT, ELECTROMAGNETIC INTERFERENCE (EMI), 10 FOOT, RIGID 20 FOOT, RIGID (1 MAR 1994)., This specification establishes the requirements for manufacture, acceptance and configuration for four types of EMC shelters.

MIL-S-29593(AS) (NOTICE 1), MILITARY SPECIFICATION SONOBUOY, AN/SSQ-110 (XJ-1), GENERAL SPECIFICATION FOR. MIL-S-29593(AS) is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-29594, MILITARY SPECIFICATION, SPECTACLES, AVIATORS, SEVEN WAVELENGTH LASER EYE PROTECTIVE (17 JUL 1992)., This specification covers the requirements for one type of aviator's spectacles, with carrying case, designated EDU-6/P, which provide protection against seven fixed laser wavelengths and have prescription capability (see 6.2d and 6.21).

MIL-S-29630, MILITARY SPECIFICATION SLACKS, WOMEN'S (5 MAR 1991)., This specification covers the requirements for women's slacks with body types and lengths.

MIL-S-3105C (NOTICE 3), MILITARY SPECIFICATION, SEALING COMPOUND, INERT (FOR USE IN AMMUNITION) (19 SEP 2002)., MIL-S-3105C dated 4 December 1970 is hereby reinstated and may be used for acquisition.

MIL-S-3289 (AMENDMENT 1), MILITARY SPECIFICATION, STEEL, PLATE AND DISK, CARBON, FORGING QUALITY (13 JUN 2002)., This amendment forms a part of MIL-S-3289B, dated 25 SEPTEMBER 1984, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-3289, MILITARY SPECIFICATION, STEEL, PLATE AND DISK, CARBON, FORGING QUALITY (23 APR 1965)., This specification covers one composition of forging quality carbon steel plate and disks, for steel cartridge cases for 20MM and larger ammunition.

MIL-S-3443D, MILITARY SPECIFICATION SHOTGUN 12 GAGE, RIOT-TYPE, (5 NOV 1975)., This specification covers two types and classes of manually operated, slide action, hammerless, 12 gage riot-type shotguns.

MIL-S-3443E, MILITARY SPECIFICATION SHOTGUN 12 GAGE, RIOT-TYPE, (20 MAR 1989)., This specification covers the requirements, examinations and tests for three types and two classes, of manually operated, slide action, hammerless, 12 gage riot-type shotguns.

MIL-S-3443G (AR) (NOTICE 1), MILITARY SPECIFICATION SHOTGUN, 12 GAGE RIOT-TYPE (12 DEC 1995)., MIL-S-3443 (AR), dated 4 OCT 1993, is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-3443G, MILITARY SPECIFICATION SHOTGUN 12 GAGE, RIOT-TYPE, (4 OCT 1993)., This specification covers the requirements, examinations and tests for three types and two classes, of manually operated, slide action, hammerless, 12 gage riot-type shotguns.

MIL-S-36609B, MILITARY SPECIFICATION SURVIVAL KIT, INDIVIDUAL, TROPICAL, TACTICAL AIR CREW (19 JAN 1977)., This specification covers a kit containing specified medical and survival items intended to sustain the lives of air crewmen under survival conditions in the tropical climate of Southeast Asia (see 6.4).

MIL-S-37988, MILITARY SPECIFICATION SURVIVAL KIT, INDIVIDUAL, TROPICAL, TACTICAL AIR CREW, IN PLASTIC BAG (2 OCT 1985)., This specification covers a kit containing specified medical and survival items intended to sustain the lives of air crewmen under survival conditions in a tropical climate.

MIL-S-38228 (AMENDMENT 2), MILITARY SPECIFICATION, SEALING COMPOUND, ENVIRONMENTAL, FOR AIRCRAFT SURFACES (8 MAY 1967).

MIL-S-38228, MILITARY SPECIFICATION, SEALING COMPOUND, ENVIRONMENTAL, FOR AIRCRAFT SURFACES (28 JUL 1964)., This specification covers temperature-resistant and weather-resistant synthetic rubber compounds for filling and sealing exterior surfaces of aircraft and missiles.

MIL-S-38794B, MILITARY SPECIFICATION, SOURCE DATA: PREPARATION OF (FOR NON-NUCLEAR MUNITIONS DISPOSAL PROCEDURES MANUALS, LOADING PROCEDURES, MANUALS, AND POSITIONING AND TIEDOWN MANUALS) (17 JUN 1983)., This specification covers the requirements for the preparation of source data for inclusion in non-nuclear munitions disposal procedures manuals, loading procedures manuals and positioning and tiedown manuals.

MIL-S-4174B, MILITARY SPECIFICATION, STEEL SHEET AND STRIP, FLAT, ALUMINUM COATED LOW CARBON (9 FEB 1968) [S/S BY SAE-AMS5036 AND ASTM-A463]., This specification covers the requirements for cold rolled low carbon steel sheet and strip coated on both sides with a layer of aluminum using a hot-dipped coating process.

MIL-S-41825F, MILITARY SPECIFICATION, SLACKS, WOMEN'S (30 AUG 1988)., This specification covers the requirements for women's slacks.

MIL-S-43292D, MILITARY SPECIFICATION, STATIC LINES, CARGO PARACHUTES, GENERAL SPECIFICATION FOR (23 AUG 1989)., This specification covers the general requirements for four types of airdrop cargo static lines.

MIL-S-43770 (AMENDMENT 3), MILITARY SPECIFICATION, SNAP HOOKS GENERAL SPECIFICATION FOR (27 JAN 1977) [S/S BY NASM43770].

MIL-S-43770 (SUPPLEMENT 1), MILITARY SPECIFICATION, SNAP HOOKS GENERAL SPECIFICATION FOR (26 JUN 1972) [S/S BY NASM43770].

MIL-S-43770, MILITARY SPECIFICATION, SNAP HOOKS GENERAL SPECIFICATION FOR (31 MAR 1972) [S/S BY NASM43770]., This specification covers the general requirements for snap hooks.

MIL-S-44110B, MILITARY SPECIFICATION SLACKS, MATERNITY, UTILITY WORK UNIFORM (10 JAN 1991)., This specification covers maternity slacks made of cotton poplin cloth, woodland camouflage pattern.

MIL-S-45743E (AMENDMENT 1), MILITARY SPECIFICATION, SOLDERING, MANUAL TYPE, HIGH RELIABILITY ELECTRICAL AND ELECTRONIC EQUIPMENT (17 SEP 1979) (S/S BY MIL-STD-2000).

MIL-S-45743E (NOTICE 1), MILITARY SPECIFICATION, SOLDERING, MANUAL TYPE, HIGH RELIABILITY ELECTRICAL AND ELECTRONIC EQUIPMENT (8 SEP 1989) (S/S BY MIL-STD-2000).

MIL-S-45743E (NOTICE 2), MILITARY SPECIFICATION, SOLDERING, MANUAL TYPE, HIGH RELIABILITY ELECTRICAL AND ELECTRONIC EQUIPMENT (27 FEB 1995) (S/S BY MIL-STD-2000)., MIL-S-45743E, dated 15 October 1976, is hereby canceled. Future acquisitions should refer to MIL-STD-2000A, “Standard Requirements for Soldered Electrical and Electronic Assemblies.”

MIL-S-45743E, MILITARY SPECIFICATION, SOLDERING, MANUAL TYPE, HIGH RELIABILITY ELECTRICAL AND ELECTRONIC EQUIPMENT (15 OCT 1976) (S/S BY MIL-STD-2000)., This specification covers soldering, high reliability electrical and electronic connections with maual soldering apparatus as applicable to guided missile and certain aerospace equipment requiring extraordinary control of soldering environment and techniques. Is not applicable to general soldering requirements

MIL-S-45909C (SUPPLEMENT 1), MILITARY SPECIFICATION, STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (27 MAR 1989) [S/S BY NASM45909].

MIL-S-45909C, MILITARY SPECIFICATION, STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (27 MAR 1989) [S/S BY NASM45909]., This specification covers the requirements for locked-in studs. The method of locking the stud is by means of a serrated collar and an accessory lock ring with matching serrations installed within a parent material to prevent rotation.

MIL-S-46850D, MILITARY SPECIFICATION STEEL: BAR, PLATE, SHEET, STRIP, FORGINGS, AND EXTRUSIONS, 18 PERCENT NICKEL ALLOY, MARAGING, 200 KSI, 250 KSI, 300 KSI, AND 350 KSI, HIGH QUALITY (22 MAR 1991)., This specification covers steel bars, plate, sheet, strip, forgings and extrusions containing 18 percent nickel and capable of attaining high ultimate tensile properties by means of a relatively low temperature heat treating process

MIL-S-47147, MILITARY SPECIFICATION, SEALS, RUBBER EXTRUSIONS, NON-CELLULAR [SUPERSEDING MIS-15736]., This specification covers the requirements for non-cellular rubber extrusions of four different shapes.

MIL-S-47319A, MILITARY SPECIFICATION, STEEL, BAR, BILLET, AND FORGINGS, COBALT-FREE MARAGING (26 NOV 1991)., This specification defines the requirements of two classes of one type of steel bar, forgings and stock for forging, cobalt-free maraging, containing 18 percent nickel and capable of attaining high ultimate tensile properties by means of a relatively low temperature heat treating process.

MIL-S-49248B, MILITARY SPECIFICATION, SHELTER, ELECTRONIC EQUIPMENT, S-639/G AND S-640/G (12 FEB 1987)., This specification covers the following: (i) Shelter, Electronics Equipment S-639/G is a mobile assemblage house in a modified S-280()/G shelter equipped with work benches, storage cabinets and racks, lighting, air conditioning, and power to form an electronic repair shop for the maintenance of electronic equipment. It is cable of being transported by railroad, military truck, and airlift; and (ii) ) Shelter, Electronics Equipment S-639/G is a mobile assemblage house in a modified S-640()/G shelter equipped with storage cabinets and racks, lighting, exhaust blowers, and dehumidifier to form an storage shelter to support the repair shop assemblage. It is cable of being transported by railroad, military truck, and airlift.

MIL-S-5000E (NOTICE 1), MILITARY SPECIFICATION STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS, AND FORGING STOCK (27 SEP 1995)., MIL-S-5000E, dated 12 November 1982, is hereby cancelled. Future acquisitions for this material should refer to AMS 6415, Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340); or, AMS 6484, Steel Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38-0.43C), Normalized and Tempered, (SAE 4340). (Application for copies of SAE AMS publications should be addressed to the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096.)

MIL-S-5000E (NOTICE 2), MILITARY SPECIFICATION STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS, AND FORGING STOCK (11 AUG 2000)., MIL-S-5000E, dated 12 November 1982, is hereby canceled. Future acquisition for this material should refer to SAE-AMS-S-5000, “Steel, Chrome-Nickel-Molybdenum (E4340) bars and reforging stock.” (Application for copies of SAE – Aerospace Standards should be addressed to SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)

MIL-S-5000E, MILITARY SPECIFICATION STEEL, CHROME-NICKEL-MOLYBDENUM (E4340) BARS AND REFORGING STOCK (12 NOV 1982)., This specification covers electric furnace steel bars and reforging stock of aircraft quantity.

MIL-S-5002D (AMENDMENT 2), MILITARY SPECIFICATION, SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS (20 OCT 1999)[SUPERSEDING AMENDMENT 1]., This amendment forms a part of MIL-S-5002D, dated 30 November 1989, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-5002D, MILITARY SPECIFICATION, SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS (30 NOV 1989)., This specification covers the requirements for cleaning, surface treatments and inorganic coatings for metallic surfaces of weapons systems parts.

MIL-S-5059D (AMENDMENT 2), STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP (29 NOV 1985)., This amendment forms a part of MIL-S-50590, dated 30 May 1983, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-5059D (AMENDMENT 3), STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP (6 APR 1990)., This amendment forms a part of MIL-S-50590, dated 30 May 1983, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-5059D (NOTICE 1), STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP (20 SEP 1993) (S/S BY SAE-AMS5513, SAE-AMS5910 THRU 5913, SAE-AMS5524, SAE-AMS5516 THRU 5519, SAE-AMS5901 THRU 5907)., MIL-S-5059D,dated 30 May 1983, including amendment 3 dated 6 April 1990, is hereby canceled. Future aquis!tlons for this material should refer to the following Aerospace Material Specifications (AMS) shown below for each alloy and temper condition.

MIL-S-5059D, STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP (30 MAY 1983)., This specification covers the requirements for four types and five conditions of aircraft quality corrosion-resistant (18-8) steel plate, sheet and strip.

MIL-S-50827A (AR) (NOTICE 1), MILITARY SPECIFICATION SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONIC DEVICES (19 MAR 1990) [S/S BY MIL-STD-2000]., MIL-S-50827A (MU), dated 1 November 1974, with Amendment 1, dated 18 April 1977, are hereby canceled. Future acquisitions invoking these requirements should refer to MIL-STD-2000, Standard Requirements for Soldered Electrical and Electronic Assemblies.

MIL-S-50827A (MU) (AMENDMENT 1), MILITARY SPECIFICATION SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONIC DEVICES (18 APR 1977) [S/S BY MIL-STD-2000].

MIL-S-50827A, MILITARY SPECIFICATION SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONIC DEVICES (1 NOV 1974) [S/S BY MIL-STD-2000]., This specification covers requirements and inspection criteria for soft soldered electrical connections in intricate and complex electronic or electromechanical items related to conventional weapons and other associated electronic devices. These items are high production rate devices in which mission performance is accomplished by a pattern or salvo. The specification aims at the establishment and maintenance of a process level adequate to support functional requirements.

MIL-S-5300(ME)MILITARY SPECIFICATION, SCRAPER, 14-18 CUBIC YARD MINIMUM STRUCK CAPACITY OPEN BOWL, SINGLE-DIESEL-ENGINE-DRIVEN COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) (5 JUL 2005)., This specification is approved for use by the Mobility Equipment Research and Development Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense. This specification covers a commercial open bowl, pneumatic-tired, two-axle, 14-18 cubic yard minimum struck capacity, single-diesel-engine-driven, articulated frame steer scraper.

MIL-S-53000(ME) (NOTICE 1), MILITARY SPECIFICATION, SCRAPER, 14-18 CUBIC YARD MINIMUM STRUCK CAPACITY, OPEN BOWL, SINGLE DIESEL-ENGINE-DRIVEN, COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) (9 MAR 1998)., This notice should be filed in front of MIL-S-53000(ME), dated 18 December 1981. MIL-S-53000(ME) is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-53000(ME), MILITARY SPECIFICATION, SCRAPER, 14-18 CUBIC YARD MINIMUM STRUCK CAPACITY OPEN BOWL, SINGLE-DIESEL-ENGINE-DRIVEN, COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) (18 DEC 1991)., This specification covers a commercial open bowl, pneumatic-tired, two-axle, 14-18 cubic yard minimum struck capacity, single-diesel-engine-driven, articulated frame steer scraper.

MIL-S-53021A, MILITARY SPECIFICATION, STABILIZER ADDITIVE, DIESEL FUEL (15 AUG 1988)., This military specification covers a stabilizer additive for use in diesel fuels meeting the requirements of VV-F-800 which are intended for intermediate (6-24 months) or long-term (25-60 months) storage.

MIL-S-55094 (SUPPLEMENT 1), MILITARY SPECIFICATION, STAKE, GUY AND OTHER HARDWARE FOR ANTENNA MASTS (2 FEB 1960).

MIL-S-55094, MILITARY SPECIFICATION, STAKE, GUY AND OTHER HARDWARE FOR ANTENNA MASTS (2 FEB 1960)., This specification covers guy stakes and other hardware for antenna masts, including, but not restricted to the following: Clevis, mast holder. Holder, Mast (Mast Base AB-154/. Pin, Straight, Headless. Stake, Guy, Antenna (Stake GP-2). Stake, Guy Antenna (Stake GP-101/U). Stake, Guy, Antenna (Guy Stake GP-111/G). State, Guy, Antenna (Guy Stake GP-111/g). Stake, Wood, Antenna. Stake, Guy Antenna.

MIL-S-55286E (CR) (AMENDMENT 1), MILITARY SPECIFICATION SHELTER, ELECTRICAL EQUIPMENT, S-280()/G (21 MAY 1985)., This amendment forms a part of Military Specification MIL-S-55286E (CR), dated 11 October 1983 and is approved for use by the Communications and Electronics Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense

MIL-S-55286E (CR) (INTERIM AMENDMENT 2), MILITARY SPECIFICATION SHELTER, ELECTRICAL EQUIPMENT, S-280()/G (16 DEC 1991)., This interim amendment is approved for use within the Department of the Army with MIL-S-55286E, dated 11 October 1983.

MIL-S-55286E (CR) (NOTICE 1), MILITARY SPECIFICATION SHELTER, ELECTRICAL EQUIPMENT, S-280()/G (22 APR 1998)., MIL-S-55286E(CR) is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-55286E (CR), MILITARY SPECIFICATION SHELTER, ELECTRICAL EQUIPMENT, S-280()/G (11 OCT 1983)., This specification covers one type of lightweight field and mobile shelter designed for transport by cargo truck, fixed or rotary winged aircraft, by rail, ship, and landing craft, designated as Shelter, Electrical Equipment S-280( )/G (See 6.6).

MIL-S-55286E (INTERIM AMENDMENT 2)(NOTICE 2), MILITARY SPECIFICATION, SHELTER, ELECTRICAL EQUIPMENT, S-280( )/G ()., MIL-S-55286E Interim Amendment 2, dated 22 April 1998, is hereby canceled without replacement.

MIL-S-55541G, MILITARY SPECIFICATION, SHELTER, ELECTRICAL, Shelter, S-250 ( )/G (1 AUG 1984)., This specification covers one type of lightweight field and mobile shelter designed for transport by cargo truck, fixed or rotary winged aircraft, rail and ship, and designated Shelter, Electrical Equipment, S-250( )/G (See 6.2).

MIL-S-55562C, MILITARY SPECIFICATION, SHOP, ELECTRONIC, SEMITRAILER MOUNTED AN/ARM-189( ) AND AN/ASM-190 (31 MAR 1980)., This specification covers the modification of Semi-Trailers, Vans, Electronic, M373A2 and the installation of the applicable equipment and ancillary items into the modified vans to form Electronic Shops, Semi-Trailer Mounted, AN/ASM-189( ) and AN/ASM-190 ( ). (See 6.5)

MIL-S-5626C, MILITARY SPECIFICATION STEEL, CHROME-MOLYBDENUM (4140) BARS, RODS, AND FORGING STOCK (FOR AIRCRAFT APPLICATION) (17 JUL 1968) (S/S BY SAE-AMS6382, AND SAE-AMS6349)., This specification covers chrome-molybdenum (4140) steel bars, rods, and forging stock of aircraft quality.

MIL-S-5676A, MILITARY STANDARD SPLICING, CABLE TERMINAL, PROCESS FOR, AIRCRAFT (4 APR 1950) (S/S BY SAE-AS56761)., This specificagifon is designed to present detailed procedures to be followed in splicing cable terminals.

MIL-S-58095A, MILITARY SPECIFICATION, SEAT SYSTEM: CRASH RESISTANT, NON-EJECTION, AIRCREW, GENERAL SPECIFICATION FOR (31 JAN 1986)., This specification covers the general requirements for adjustable, crash-resistant, non-ejection aircrew seats for light fixed-wing or rotary-wing aircraft.

MIL-S-5944C, MILITARY SPECIFICATION SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR (20 NOV 1990) [S/S BY SAE-AS5944]., This specification covers the general requirements for aircraft slings used to lift and transport aircraft or aircraft components which may be bulky or fragile.

MIL-S-6049A (AMENDMENT 1), MILITARY SPECIFICATION, STEEL, CHROME-NICKEL-MOLYBDENUM (8740) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (23 JUN 1970) [S/S BY SAE-AMS6322, SAE-AMS6325 AND SAE-AMS6327].

MIL-S-6049A, MILITARY SPECIFICATION, STEEL, CHROME-NICKEL-MOLYBDENUM (8740) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (28 JUN 1967) [S/S BY SAE-AMS6322, SAE-AMS6325 AND SAE-AMS6327]., This specification presents the requirements for chrome-nickel-molybdenum (8740) steel bars and reforging stock of aircraft quality.

MIL-S-6050A (AMENDMENT 2), MILITARY SPECIFICATION, STEEL, CHROME-NICKEL-MOLYBDENUM (8630) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (13 NOV 1968).

MIL-S-6050A, MILITARY SPECIFICATION, STEEL, CHROME-NICKEL-MOLYBDENUM (8630) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (21 JUL 1967)., This specification covers steel bars and reforging stock of aircraft quality.

MIL-S-60902, MILITARY SPECIFICATION, SOLDERING ELECTRICAL CONNECTIONS FOR NUCLEAR WEAPONS SYSTEMS, PROCEDURE FOR (23 DEC 1974) [S/S BY MIL-STD-1460]., MIL-S-60902 is hereby canceled. Military Standard MIL-STD-1460, Soldering of Electrical Connections and Printed Wiring Assemblies, Procedure for, should be used for future procurements.

MIL-S-6090A, MILITARY SPECIFICATION, STEELS USED IN AIRCRAFT CARBURIZING AND NITRIDING, PROCESS FOR (20 JUL 1972) [S/S BY SAE-AMS-S-6090].

MIL-S-6090A, MILITARY SPECIFICATION, STEELS USED IN AIRCRAFT CARBURIZING AND NITRIDING, PROCESS FOR (4 JUN 1971) [S/S BY SAE-AMS-S-6090]., This specification presents requirements for the carburizing and nitriding of carbon and allow steels to produce the mechanical properties specified by drawings, detail specifications, or other applicable specifications. The heat treatment of parts fabricated shall be in general accordance with the methods described in this speciification.

MIL-S-6098A, MILITARY SPECIFICATION, STEEL, CHROME-NICKEL-MOLYBDENUM (8735) BARS AND REFORGING STOCK (AIRCRAFT) (12 JAN 1967) [S/S BY SAE-AMS-S-6098]., This specification covers steel bars and reforging stock of aircraft quality.

MIL-S-62353, MILITARY SPECIFICATION, SEMITRAILER, VAN: MOBILE TEMPEST TEST SET (MTTS) (4 APR 1983)., This specification covers a MTTS which consists of: (a) semitrailer housing rack mounted electronic equipment; two gasoline powered generators; shore power capability; and storage areas, and (b) commercial, fifth wheel equipped crewcab pickup truck.

MIL-S-6551A, MILITARY SPECIFICATION, SEAT, CREW, DOWNWARD EJECTION, AIRCRAFT (21 SEP 1981)., This specification establishes the requirements for two types of aircraft adjustable crew seats for downward ejection.

MIL-S-6709A (AMENDMENT 2), MILITARY SPECIFICATION, STEEL, CHROME-MOLYBDENUM-ALUMINUM; BARS, RODS, BILLETS AND FORGING STOCK (FOR NITRIDING) (AIRCRAFT QUALITY) (18 JUL 1968) [S/S BY SAE-AMS6470 AND SAE-AMS6472].

MIL-S-6709A, MILITARY SPECIFICATION, STEEL, CHROME-MOLYBDENUM-ALUMINUM; BARS, RODS, BILLETS AND FORGING STOCK (FOR NITRIDING) (AIRCRAFT QUALITY) (24 MAR 1965) [S/S BY SAE-AMS6470 AND SAE-AMS6472]., This specification covers steel of aircraft quality for use in the manufacture of nitrided parts.

MIL-S-6758B, MILITARY SPECIFICATION, STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) (18 MAY 1993) [S/S BY SAE-AMS-S-6758]., This specification covers chrome-molybdenum (4130) steel bars and forging stock of aircraft quality

MIL-S-6852B, MILITARY SPECIFICATION, SPLICE, CONDUCTOR, ELECTRIC, DISCONNECT (13 JAN 1971 [S/S BY SAE-AS6852]., Splices furnished in accordance with this specification shall be one type, disconnect splice assembly, of the sizes shown in Figure 1 as specified (see 6. 2).

MIL-S-6872B (INTERIM AMENDMENT 1 (AT)), MILITARY SPECIFICATION SOLDERING PROCESS, GENERAL SPECIFICATION FOR (14 JUN 1968). This interim amendment is issued by the U.S. Army Tank Automotive command with Military Specification MIL-S-6872B dated 14 JUNE 1968.

MIL-S-6872B (NOTICE 1), MILITARY SPECIFICATION SOLDERING PROCESS, GENERAL SPECIFICATION FOR (7 JUN 1983)., MIL-S-6872B, dated 14 June ]968, is hereby cancelled. Future procurement should be made under DoD-STD-1866 Soldering Process General (Non-Electrical).

MIL-S-6872B, MILITARY SPECIFICATION SOLDERING PROCESS, GENERAL SPECIFICATION FOR (14 JUN 1968)., This specification presents general fabrication and quality requirements for non-electrical assemblies of steel. coated steel, (tinned; terne; galvanized with zinc, cadmium, or nickel; and clad) copper and copper alloys, lead and lead alloys, zinc and zinc alloys, nickel and nickel alloys, tin and tin alloys, aluminum and aluminum alloys, produced by soldering processes using solder filler metals having a lower melting point than the base metal.

MIL-S-70538A, MILITARY SPECIFICATION SAW, M249 AMMUNITION MAGAZINE ASSEMBLY AND FEEDSTOCK (30 NOV 1994)., This specification covers requirements examinations and tests for the SAW, M249 Ammunition Magazine Assembly and Feedstrap. The assembly consists of a magazine with a cover; the feedstrap is not a part of the assembly. (See 6.1)

MIL-S-7108A (AMENDMENT 1), MILITARY SPECIFICATION, STEEL, ALLOY (MANGANESE-SILICON-NICKEL), BARS AND FORGING STOCK (AIRCRAFT QUALITY) (ASG) (30 AUG 1956) [S/S BY SAE-AMS6425].

MIL-S-7108A (NOTICE 1), MILITARY SPECIFICATION, STEEL, ALLOY (MANGANESE-SILICON-NICKEL), BARS AND FORGING STOCK (AIRCRAFT QUALITY) (ASG) (9 MAY 1997) [S/S BY SAE-AMS6425].

MIL-S-7108A, MILITARY SPECIFICATION, STEEL, ALLOY (MANGANESE-SILICON-NICKEL), BARS AND FORGING STOCK (AIRCRAFT QUALITY) (ASG) (23 AUG 1955) [S/S BY SAE-AMS6425]., This specification covers manganese-silicon-nickel alloy steel bars and forging stock of aircraft quality and suitable for heat treatment to 220,000 psi tensile strength.

MIL-S-7720A (AMENDMENT 2), MILITARY SPECIFICATION, STEEL, CORROSION,RESISTANT (18-8) BARS, WIRE AND FORGING STOCK (AIRCRAFT QUALITY) (26 JUL 1974) [S/S BY SAE-AMS-S-7720].

MIL-S-7720A, MILITARY SPECIFICATION, STEEL, CORROSION,RESISTANT (18-8) BARS, WIRE AND FORGING STOCK (AIRCRAFT QUALITY) (25 OCT 1967) [S/S BY SAE-AMS-S-7720]., This specification covers the requirements for compositions of corrosion-resistant (18-8) steel bars, rods, wire and forging stock.

MIL-S-7742D (AMENDMENT 1), MILITARY SPECIFICATION SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES: GENERAL SPECIFICATION FOR (2 SEP 1992)., This amendment forms a part of MIL-S-7742D, dated 25 July 1991, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-7742D, MILITARY SPECIFICATION SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES: GENERAL SPECIFICATION FOR (25 JUL 1991)., This specification covers the requirements for a selected series of standard Unified and Unified Miniature screw threads, classes 3A and 3B of Fed-std-H28/2 and FED-STD-H28/5 for general aerospace and similar high-tech application.

MIL-S-7839B (AMENDMENT 3), SCREW, STRUCTURAL, AIRCRAFT (6 MAR 1984) [S/S BY NASM7839].

MIL-S-7839B, MILITARY SPECIFICATION, SCREW, STRUCTURAL, AIRCRAFT (21 DEC 1973) [S/S BY NASM7839]., This specification covers aircraft structural screws.

MIL-S-7952A, MILITARY SPECIFICATION, STEEL, SHEET AND STRIP, UNCOATED, CARBON (1020 AND 1025) (AIRCRAFT QUALITY) (12 DEC 1994) [S/S BY SAE-AMS5046]., This notice should be filed in front of ML-S-7952A, dated 12 July 1963 and Amendment 1 dated 22 August 1963. Future acquisition for this material should refer to AMS 5046, Sheet, Strip and Plate, Carbon Steel (ME 1020 and 1025) Annealed. (Application for copies of ANN publication should be addressed to the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096). MIA-7952A and Amendment 1, is inactive for new design and is no longer used by the Air Force except for replacement purposes.

MIL-S-7998A, MILITARY SPECIFICATION, SANDWICH CONSTRUCTION CORE MATERIAL, BALSA WOOD (6 MAR 1970)., This specification covers one grade of balsa for use as a core material in the preparation of sandwich sheets and shapes for aircraft.

MIL-S-81478C (AS) (NOTICE 1), MILITARY SPECIFICATION, SONOBUOY AN/SSQ-57A (NO S/S DOCUMENT). MIL-S-81478C(AS), DATED 10 APRIL 1985, HAS BEEN REVIEWED AND DETERMINED TO BE VALID FOR USE IN ACQUISITION.

MIL-S-81478C (AS) (NOTICE 2), MILITARY SPECIFICATION, SONOBUOY AN/SSQ-57A (NO S/S DOCUMENT). MIL-S-81478C(AS), DATED 10 APRIL 1985, AND NOTICE 1, ARE HEREBY CANCELLED WITHOUT REPLACEMENT.

MIL-S-81478C, MILITARY SPECIFICATION SONOBUOY AN/SSQ-57A. This specification establishes the design, performance and acceptance requirements for the AN/SSQ-57A Sonobuoy.

MIL-S-81591 (AMENDMENT 3), MILITARY SPECIFICATION STEEL, INVESTMENT CASTINGS, CARBON AND CORROSION RESISTING (31 JAN 1983).

MIL-S-81591, MILITARY SPECIFICATION STEEL, INVESTMENT CASTINGS, CARBON AND CORROSION RESISTING (9 SEP 1968)., This specification prescribes the requirements for carbon steel castings and corrosion-resistant steel castings made by the investment casting process.

MIL-S-81733D, SEALING AND COATING COMPOUND, CORROSION INHIBITIVE (13 MAR 1980) [S/S BY MIL-PRF-81733D]., This specification covers accelerated, room temperature curing synthetic rubber compounds used in the sealing and coating of metal components on weapons and aircraft systems for protection against corrosion.

MIL-S-82068C (NOTICE 2), DETAIL SPECIFICATION, SPRAYERS, PESTICIDE; TRAILER-MOUNTED, GASOLINE-ENGINE-DRIVEN (12 JUL 2006)., MIL-S-82068C, dated 25 May 2000, remains inactive for new design; however, the document is valid for use.

MIL-S-82496A, MILITARY SPECIFICATION, SCREWS, MACHINE, SELF SEALING, INTEGRAL O-RING (30 APR 1977) [S/S BY NASM82496]., This specification covers the requirements for the procurement of integral O-ring, self-sealing machine screws including self-locking screws referred to herein as assembled screws.

MIL-S-83482B, MILITARY SPECIFICATION SLACKS, WOMEN'S (1 JUN 1988), This specification covers the requirements for woman's slacks.

MIL-S-83490 (NOTICE 1), MILITARY SPECIFICATION, SPECIFICATION, TYPES AND FORMS (31 AUG 1995) (S/S BY MIL-STD-961)., MIL-S-83490, dated 30 October 1968, is hereby canceled. Requirements for the preparation of specifications have been incorporated into MIL-STD-961, “Department of Defense Standard Practice for Defense Specifications.

MIL-S-83490, MILITARY SPECIFICATION, SPECIFICATION, TYPES AND FORMS (30 OCT 1968) (S/S BY MIL-STD-961). This specification prescribes general requirements for the preparation of specifications for the Departments and Agencies of the Department of Defense.

MIL-S-83519A (AMENDMENT 4), MILITARY SPECIFICATION, SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR (17 FEB 1993) [S/S BY SAE-AS83519].

MIL-S-83519A (NOTICE 2), MILITARY SPECIFICATION, SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR (26 OCT 2000) [S/S BY SAE-AS83519]., MIL-S-83519A, dated 31 August 1998, is hereby canceled. Future acquisition for this item should refer to SAE-AS83519, ?Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant, General Specification For.?

MIL-S-83519A, MILITARY SPECIFICATION, SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR (21 JUN 1984) [S/S BY SAE-AS83519]., This specification covers environment resistant, heat-shrinkable, soldertype shield terminations. They may be used on data-bus, RF, and shieled cables in applications where the operating temperature does not exceed 150 deg C.

MIL-S-83576, MILITARY SPECIFICATION SOLAR CELLS ARRAYS, SPACE VEHICLE, DESIGN AND TESTING, GENERAL SPECIFICATION FOR (1 NOV 1994)., This specification establishes the general design~ fabrication, performance, and testing requirements for solar cell panels (6.3.4) and solar cell arrays (6.3.5) to be installed on space vehicles to convert solar energy into electrical energy as part of the vehicle electrical system.

MIL-S-8512D (2) (NOTICE 2)., MILITARY SPECIFICATION SUPPORT EQUIPMENT, AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF (13 MAY 2002) [SUPERSEDING NOTICE 1]., MIL-S-8512D(2), dated 14 March 1980, is hereby reinstated and may be used for acquisition.

MIL-S-8512D (AMENDMENT 2), MILITARY SPECIFICATION, SUPPORT EQUIPMENT, AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF (14 MAR 1980) [SUPERSEDING AMENDMENT 1].

MIL-S-8512D, MILITARY SPECIFICATION, SUPPORT EQUIPMENT, AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF (19 FEB 1974)., This specification covers general requirements for design and construction of ground support equipment and provisions to be incorporated in detail specifications for specific items of equipment.

MIL-S-8516F, MILITARY SPECIFICATION SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED (31 MAY 1992)., This specification covers a two-component, chemically cured synthetic rubber compound for insulating, sealing, reinforcing, and corrosion protection of electric connectors, wiring, and other electric apparatus. This specification has provisions for shelf-life extension (see 3.2.4).

MIL-S-851D, MILITARY SPECIFICATION STEEL GRIT, SHOT, AND CUT WIRE SHOT; AND IRON GRIT AND SHOT-BLAST CLEANING AND PEENING (21 APR 1989) (S/S BY SAE-J1993, SAE-J827, SAE-J444, AND SAE-J441)., This specification covers cast iron or hardened cast steel grit and shot for blast cleaning of castings, forgings, ship hulls and decks, or other parts prior to use for the removal of sand, slag, rust, and marine incrustations; and also cast iron or hardened cast steel shot, or cut steel wire shot for peening the surface of metals.

MIL-S-85419, MILITARY SPECIFICATION, STARTER/AUXILIARY POWER UNIT, AIRCRAFT ENGINE, GAS TURBINE TYPE, DETAILED SPECIFICATION FOR (1 OCT 1981)., This specification covers a gas turbine starter/APU for starting the main aircraft engine and providing emergency electrical power on the AV-8B aircraft. This specification also establishes the content and format to be used by the supplier for the preparation of the gas turbine starter/APU model specification.

MIL-S-85510 (AS), MILITARY SPECIFICATION SEATS, HELICOPTER CABIN, CRASHWORTHY, GENERAL SPECIFICATION FOR (19 NOV 1981)., This specification established the design requirements for two types, three classes and four sizes of lightweight, folding, crashworthy seats for use by troops/passengers in helicopters.

MIL-S-85848/2 (AMENDMENT 1), SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, POLYVINYLIDE FLUORIDE, FLEXIBLE. This amendment forms a part of Military specification Sheet MIL-S-85848/s (AS), and is approved for use.

MIL-S-85848/2, SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, POLYVINYLIDE FLUORIDE, FLEXIBLE. The complete requirements for procuring sleeving described herein shall consist of this document and the issue in effect of MIL-I-85848 (AS).

MIL-S-858932 (AS), SIMULATOR, SURFACE-TO-AIR MISSILE (SMOKEY SAM SIMULATOR) SMU-124/E. This specification establishes the requirements for the manufacture and Inspection of the Smokey SAM Simulator. The Smokey SAM Simulator is comprised of the GTR-18A Rocket, the PVU-3A/E Igniter, and a breech hole shield.

MIL-S-8660C (AMENDMENT 2), MILITARY SPECIFICATION, SILICONE COMPOUND, NATO CODE NUMBER S-736 (25 JUN 1999) [S/S BY SAE-AS8660].

MIL-S-8660C, MILITARY SPECIFICATION, SILICONE COMPOUND, NATO CODE NUMBER S-736 (22 SEP 1983) [S/S BY SAE-AS8660]., This specification covers one type of a non-melting, heat stable silicone compound for use in high tension electrical connections, ignition systems and electronics equipment; for application to unpainted mating threaded or non-threaded surfaces, and as a lubricant for compounds fabricated from rubber. This compound is effective in the temperature range from -54°C (-65°F) to +204°C,(+400°F) for extended periods and to 260°C (500°F) for short periods. This compound is identified by NATO symbol S-736 see 6.5).

MIL-S-8698 (AMENDMENT 1), MILITARY SPECIFICATION STRUCTURAL DESIGN REQUIREMENTS, HELICOPTERS (28 FEB 1958).,

MIL-S-8698, MILITARY SPECIFICATION STRUCTURAL DESIGN REQUIREMENTS, HELICOPTERS (1 JUL 1954)., This specification covers the static and dynamic structural design criteria for helicopters. It defines the minimum requirements fop flight, ground, and pilot loads, the load distribution,and the accompanying stress of all components.

MIL-S-869C, MILITARY SPECIFICATION, STEEL BARS, BILLETS, AND FORGINGS - ALLOY NITRIDING APPLICATION [S/S BY DOD-F-24669/3]., Military Specification MIL-S-869C, dated 14 May 1958, is hereby canceled. Future acquisition of these bars, billets and forgings should be made . under DOD-F-2466913, Forgings and Forging Stock, Steel Bars and Billets for Nitriding (Metric).

MIL-S-87012D, MILITARY SPECIFICATION SLACKS, WOMAN'S, DRESS (CG) (13 MAR 1992)., This specification covers the requirements for polyester and wool women's dress slacks.

MIL-S-87054C, MILITARY SPECIFICATION SLACKS, WOMEN'S, BELTED (29 SEP 1988)., This specification covers the requirements for polyester/cotton and polyester/wool women's dress slacks.

MIL-S-87063B, MILITARY SPECIFICATION SLACKS, UTILITY, WOMEN'S DENIM (22 SEP 1987)., This specification covers the requirements for utility slacks made from a denim material.

MIL-S-8802F (AMENDMENT 4), MILITARY SPECIFICATION, SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (20 JAN 1995) [S/S BY SAE-AMS-S-8802].

MIL-S-8802F, MILITARY SPECIFICATION, SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (07 MAR 1990) [S/S BY SAE-AMS-S-8802]., This specification covers temperature-resistant -65 Deg. F to +250 Deg. F (-54 Deg. C to +121 Deg. C), two component synthetic rubber compounds of the polysulfide type for sealing and repairing integral fuel tanks and fuel cell cavities

MIL-S-8812D (AMENDMENT 1), MILITARY SPECIFICATION, STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR (11 FEB 1977)., This amendment forms a part of Military Specification MIL-S-8812, dated 3 September 197S, and is approved for use by al1 Departments and Agencies of the Department of Defense.

MIL-S-8812D, MILITARY SPECIFICATION, STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR (3 SEP 1975)., This specification covers the general requirements for aircraft steering systems.

MIL-S-8840B, MILITARY SPECIFICATION, STEEL SHEET AND STRIP, CORROSION-RESISTANT, PRECIPITATION HARDENING (AM350 AND AM355), PREMIUM QUALITY (5 OCT 1965) [S/S BY SAE-AMS-S-8840]., This specification covers corrosion resistant, heat treatable steel in sheet and strip form (see 6.3) of the compositions and conditions indicated.

MIL-S-8879C, MILITARY SPECIFICATION SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR (25 JUL 1991) [S/S BY SAE-AS8879]., This specification is the specification identified in FED-STD-H28/4 and contains the detailed requirements for use in acquisition of threaded products with controlled root radius screw threads, UNJ symbol.

MIL-S-8949, MILITARY SPECIFICATION (ASG), STEEL BARS, PLATES, SHEETS, BILLETS, AND REFORGING STOCK TYPE D6AC (10 MAY 1965) [S/S BY SAE-AMS-S-8949]., This specification establishes the requirements for procuring vacuum melted Cr-Mo-V-Ni, type D6AC steel forged billets, reforging stock, bars, rods, plate, sheet, and strip

MIL-S-901D (NAVY), MILITARY SPECIFICATION SHOCK TESTS. H.I. (HIGH-IMPACT) SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR (17 MAR 1989)., This specification covers shock testing requirements for ship board machinery, equipment, systems, and structures, excluding submarine pressure hull penetrations, (see 1.2.5). The purpose of these requirements is to verify the ability of shipboard installations to withstand shock loadings which may be incurred during wartime service due to the effects of nuclear or conventional weapons.

MIL-S-9041B, MILITARY SPECIFICATION SANDWICH CONSTRUCTION; PLASTIC RESIN, GLASS FABRIC BASE, LAMINATED FACINGS AND HONEYCOMB CORE FOR AIRCRAFT STRUCTURAL AND ELECTRONIC APPLICATIONS (19 MAR 1975)., This specification covers the requirements for plastic molded sandwich construction using glass fabric base plastic laminate facings and glass fabric base plastic honeycomb core materials for aircraft structural applications, including aircraft exterior parts, such as radio and radar antenna housings, and other parts.

MIL-S-980B, MILITARY SPECIFICATION, STEEL, CHROMIUM ALLOY, BARS (FOR TORPEDO GYROSCOPE BEARINGS) (2 JUL 1965)., This specification covers spheroidized chromium alloy steel bars of special metallurgical quality in sizes 1 inch and under in diameter, for use in torpedo gyroscope bearings requiring a finish of minimum surface roughness.